LG CM8530, CM8330 Owner Manual

ENGLISH

OWNER’S MANUAL

Mini Hi-Fi System

Please read this manual carefully before operating your set and retain it for future reference.

CM8530 (CM8530, CMS8530F/S/W)

CM8430 (CM8430, CMS8530F/W)

CM8330 (CM8330, CMS8530F)

www.lg.com

CM8430-AB_DUSALLK_ENG.indd 1			2013-01-24 8:09:12

1 GettingStarted

2 Getting Started

	Safety Information			confined space such as a book case or similar unit.
				WARNING: Do not install this equipment in a
				CAUTION: Do not block any ventilation openings.
		CAUTION		Install in accordance with the manufacturer’s
		RISK OF ELECTRIC SHOCK		instructions.
				Slots and openings in the cabinet are provided for
		DO NOT OPEN
	CAUTION: TO REDUCE THE RISK OF ELECTRIC			ventilation and to ensure reliable operation of the
				product and to protect it from over heating. The
	SHOCK DO NOT REMOVE COVER (OR BACK) NO
				openings shall be never be blocked by placing the
	USER-SERVICEABLE PARTS INSIDE REFER SERVICING
				product on a bed, sofa, rug or other similar surface.
	TO QUALIFIED SERVICE PERSONNEL.
				This product should not be placed in a built-
		This lightning flash with		in installation such as a bookcase or rack unless
				proper ventilation is provided or the manufacturer’s
		arrowhead symbol within an
				instruction has been adhered to.
		equilateral triangle is intended to
		alert the user to the presence of
		uninsulated dangerous voltage
		within the product’s enclosure
		that may be of sufficient
		magnitude to constitute a risk of		CAUTION: This product employs a Laser System.
		electric shock to persons.
				To ensure proper use of this product, please read
		The exclamation point within an
				this owner’s manual carefully and retain it for future
		equilateral triangle is intended		reference. Shall the unit require maintenance,
		to alert the user to the presence		contact an authorized service center.
		of important operating and		Use of controls, adjustments or the performance of
		maintenance (servicing)		procedures other than those specified herein may
		instructions in the literature		result in hazardous radiation exposure.
		accompanying the product.		To prevent direct exposure to laser beam, do not
				try to open the enclosure.
	WARNING: This product contains chemicals known
	to the State of California to cause cancer and birth
	defects or other reproductive harm. Wash hands
	after handling.
	WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
	HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
	OR MOISTURE.
	CAUTION: The apparatus should not be exposed to
	water (dripping or splashing) and no objects filled
	with liquids, such as vases, should be placed on the
	apparatus.

CM8430-AB_DUSALLK_ENG.indd 2			2013-01-24 8:09:13

		Getting Started 3
	CAUTION concerning the Power Cord	This device is equipped with a portable battery or
	Most appliances recommend they be placed upon	accumulator.
		Safety way to remove the battery or the
	a dedicated circuit;
	That is, a single outlet circuit which powers only	battery from the equipment: Remove the
		old battery or battery pack, follow the steps
	that appliance and has no additional outlets or
		in reverse order than the assembly. To prevent
	branch circuits. Check the specification page of this
		contamination of the environment and bring on
	owner’s manual to be certain. Do not overload wall
		possible threat to human and animal health, the
	outlets. Overloaded wall outlets, loose or damaged
		old battery or the battery put it in the appropriate
	wall outlets, extension cords, frayed power cords, or
		container at designated collection points. Do
	damaged or cracked wire insulation are dangerous.
		not dispose of batteries or battery together with
	Any of these conditions could result in electric
		other waste. It is recommended that you use
	shock or fire. Periodically examine the cord of your
		local, free reimbursement systems batteries and
	appliance, and if its appearance indicates damage
		accumulators. The battery shall not be exposed to
	or deterioration, unplug it, discontinue use of the
		excessive heat such as sunshine, fire or the like.
	appliance, and have the cord replaced with an
	exact replacement part by an authorized service
	center. Protect the power cord from physical or
	mechanical abuse, such as being twisted, kinked,
	pinched, closed in a door, or walked upon. Pay
	particular attention to plugs, wall outlets, and
	the point where the cord exits the appliance. To
	disconnect power from the mains, pull out the
	mains cord plug. When installing the product,
	ensure that the plug is easily accessible.

1 GettingStarted

CM8430-AB_DUSALLK_ENG.indd 3			2013-01-24 8:09:13

1 GettingStarted

	4		Getting Started
	IMPORTANT SAFETY			or when unused for long periods of time.
	INSTRUCTIONS			13. Unplug this apparatus during lightning storms
				Servicing is required when the apparatus has
				14. Refer all servicing to qualified service personnel.
				been damaged in any way, such as power-
				supply cord or plug is damaged, liquid has been
	1.	Read these instructions.		spilled or objects have fallen into the apparatus,
	2.	Keep these instructions.		the apparatus has been exposed to rain or
				moisture, does not operate normally, or has
	3.	Heed all warnings.
				been dropped.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

CM8430-AB_DUSALLK_ENG.indd 4			2013-01-24 8:09:14

Getting Started	5

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

yy Reorient or relocate the receiving antenna.

yy Increase the separation between the equipment and receiver.

yy Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

yy Consult the dealer or an experienced radio/TV technician for help.

CAUTION : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC WARNING : This equipment may generate or use radio frequency energy. changes or

modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC RF Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments.

Responsible Party :

LG Electronics USA, Inc. 1000 Sylvan Avenue Englewood Cliffs, NJ 07632

TEL. : [phone]

1 GettingStarted

CM8430-AB_DUSALLK_ENG.indd 5			2013-01-24 8:09:14

6 Table of Contents

Table of Contents

1	Getting Started		2	Connecting
2	Safety Information	16		How to Affix the Ferrite Core(For EMI
8	Unique Features			only)
8	Accessories	16		–  Affix the Ferrite Core for power cord
9	Playable file Requirement			(For EMI only, CM8530, CM8430)
9	–  MP3/WMA music file requirement	16		–  Affix the Ferrite Core for lighting
9	–  Compatible USB Devices			cable (For EMI only, CM8530,
9	–  USB device requirement			CM8430)
10	Front panel	17		Connecting to speakers
12	Rear panel (CM8530)	17		–  Before connecting (CM8530 only)
13	Rear panel (CM8430)	18		–  Connecting to speakers
14	Rear panel (CM8330)	19		–  Attaching the speaker light cables to
15	Remote control			the unit (For CM8530, CM8430)
		20		Optional Equipment Connection
		20		–  AUX IN Connection
		20		–  PORT. IN Connection
		20		–  Listening to music from your portable
				player or external device
		21		–  USB Connection
		21		–  Antenna Connection

CM8430-AB_DUSALLK_ENG.indd 6			2013-01-24 8:09:14

Table of Contents	7

3	Operating		4	Troubleshooting	1
22	Basic Operations	37		Troubleshooting
22	–  CD/USB Operations
22	–  Selecting a folder and	5		Appendix	2
	an MP3/WMA file
23	–  Deleting an MP3/WMA file	38		General specifications
24	Playback effect	39		Speakers specifications
24	–  SMART DJ playback	40		Trademarks and Licenses
25	–  DJ effect	41		Maintenance	3
25	–  AUTO DJ playback	41		–  Notes on Discs
26	–  JUKE BOX Playback	41		–  Handling the Unit
	(Program play)
27	Using a Bluetooth wireless technology
27	–  Listening to music stored on the				4
	Bluetooth devices
28	–  Using Bluetooth App
30	Radio Operations
30	–  Listening to the radio
30	–  Improving poor FM reception				5

30–  Presetting the Radio Stations

30–  Deleting all the saved stations

31Other Operations

31–  Turn off the sound temporarily

31–  Displaying file information (ID3 TAG)

31–  DEMO

31–  Using Microphone

31–  Switching on and off the speaker light(For CM8530, CM8430)

32Sound adjustment

32–  Setting the surround mode

32–  Setting the USER EQ

33Setting the Clock

33–  Setting the Clock Manually

33–  Setting the Clock through “LG Bluetooth Remote” App

33–  Using your player as an alarm clock

34–  Sleep Timer Setting

34 –  Dimmer

34 Advanced Operations

34 –  Recording to USB

CM8430-AB_DUSALLK_ENG.indd 7			2013-01-24 8:09:14

1 GettingStarted

8 Getting Started

Unique Features

Bluetooth®

Listens to music stored on your bluetooth device.

Portable In

Listens to music from your portable device. (MP3, Notebook, etc)

Playback effects

Listens to music with various sound and playback effects.

USB Direct Recording

Records music to your USB device.

LG Bluetooth Remote

LG Bluetooth Remote is an App designed to let you take control of some of LG’s latest Audio devices. Refer to the page 28.

Accessories

Please check and identify the supplied accessories.

FM Antenna (1)	AM Antenna (1)
Remote Control (1)	Batteries (2)
Non-skid pad(1)-
CM8530 only

CM8430-AB_DUSALLK_ENG.indd 8			2013-01-24 8:09:15

Getting Started	9

Playable file

Requirement

MP3/WMA music file requirement

MP3/WMA file compatibility with this unit is limited as follows.

yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA)

yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA)

yy Maximum files : Under 999 yy Maximum folders : Under 99

yy File extensions : “.mp3”/ “.wma”

yy CD-ROM file format : ISO 9660/ JOLIET

yy We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.

yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista)

Compatible USB Devices

yy MP3 Player : Flash type MP3 player.

yy USB Flash Drive :

Devices that support USB2.0 or USB1.1.

yy The USB function of this unit does not support all USB devices.

USB device requirement

yy Devices which require additional program installation when you have connected it to a computer, are not supported.

yy Do not extract the USB device while in operation.

yy For a large capacity USB, it may take longer than a few minute to be searched.

yy To prevent data loss, back up all data.

yy If you use a USB extension cable or USB hub, the USB device is not recognized.

yy Using NTFS file system is not supported. (Only FAT(16/ 32) file system is supported.)

yy This unit is not supported when the total number of files is 1,000 or more.

yy External HDD, Card readers, Locked devices, or hard type USB devices are not supported.

yy USB port of the unit cannot be connected to PC. The unit cannot be used as a storage device.

yy Some USB may not work with this unit.

1 GettingStarted

CM8430-AB_DUSALLK_ENG.indd 9			2013-01-24 8:09:15

1 GettingStarted

10 Getting Started

Front panel

A

B

C

D

E

F

G

H

I

J

K

L

M

CM8430-AB_DUSALLK_ENG.indd 10			2013-01-24 8:09:15

	ADisplay window	H ENTER
	Remote sensor	Selects a folder when searching a file.
		FOLDER
	B1/!(Power)
		Moves to folder and file selection mode.
	CUSB 1/2 Port
		DELETE
	You can play or record sound files by
		Deletes MP3/WMA files. (USB only)
	connecting the USB device.
		Deletes a song on JUKE BOX list.
	USB REC
		IFILE SEARCH
	Records to USB.
		Selects a folder and a file on CD/USB function.
	DFUNCTION
		JBASS BLAST
	Selects the function and input source.
		Selects the BASS BLAST or BYPASS sound
	Turn FUNCTION knob clockwise or
		directly.
	counterclockwise.
		B(Open/Close)
	ELATIN EQ
		I
	Chooses locally special equalizer.
	SMART DJ	- Stops playback or recording.
		- Cancels DELETE function.
	Selects SMART DJ mode. (For more information
		SPK Lighting / DEMO (CM8530 / CM8430)
	refer to the page 24
	AUTO DJ	- Changes speaker’s lighting effect.
		- Shows demo
	Selects the AUTO DJ mode. (For more
		DEMO (CM8330)
	informaion refer to the page 25
		- Shows demo
	USER EQ
		JUKE BOX
	Sets sound equalizer on your own.
		- Makes your favourites list.
	EFFECT LEVEL
		- Switches on and off JUKE BOX.
	Selects DJ effect level between low, middle, and
		K Y/	/U
	high.
		Press this knob to		(Play/Pause).
	FDJ EFFECT
		- Starts or pauses playback.
	Press DJ EFFECT
		- Selects Stereo/Mono.
	-select DJ effect mode.
		Turn this knob clockwise or counterclockwise to
	-Enters USER EQ setting mode and saves your
	equalizer setting	Y/U(Skip/Search).
	Turn DJ EFFECT

		- Skips Fast backward or Forward.
		Getting Started 11
	- makes a sound on DJ effect mode.	- Searches for a section within a track/file.
	- Selects BASS, MIDDLE, and TREBLE when
		- Adjusts the sound level when setting USER EQ.
	setting USER EQ.
		LDisc tray
	GVolume knob
		MPORT. IN jack
	Adjusts speaker volume.
		MIC jack
		MIC VOL.

1 GettingStarted

CM8430-AB_DUSALLK_ENG.indd 11			2013-01-24 8:09:16

1 GettingStarted

12 Getting Started

Rear panel (CM8530)

A

C

D

B

E

F

ACooling fan

BSpeakers connector

CSPEAKER LIGHTING SYSTEM

DAUX IN connectors (L/R)

EANTENNA (FM, AM)

FPower cord

>>Caution

yy Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.

yy Do not overload the extension cord with excessive electrical load.

CM8430-AB_DUSALLK_ENG.indd 12			2013-01-24 8:09:16

Getting Started 13

Rear panel (CM8430)

A

C

D

B

E

F

ACooling fan

BSpeakers connector

CSPEAKER LIGHTING SYSTEM

DAUX IN connectors (L/R)

EANTENNA (FM, AM)

FPower cord

>>Caution

yy Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.

yy Do not overload the extension cord with excessive electrical load.

1 GettingStarted

CM8430-AB_DUSALLK_ENG.indd 13			2013-01-24 8:09:17