LG BX327JD Users manual
G
Order Number : GETEC-C1-10-114 FCC Part 15 subpart B
Test Report Number : GETEC-E3-10-056 Page
APPENDIX G
: USER’S MANUAL
1 / 1
EUT Type: DLP PROJECTOR
FCC ID.: BEJBX327JD
OWNER’S MANUAL
DLP PROJECTOR
Please read this manual carefully before operating
your set and retain it for future reference.
BX277
BX327
P/NO : MFL63727101 (1005-REV00)
www.lg.com
DLP PROJECTOR
DLP PROJECTOR
Warning
This is a class B product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
Contents
Safety Instructions .......................................................4
Names of parts
Main Body .......................................................................................... 7
Control Panel .....................................................................................7
Connecting Part .............................................................................. 8
Remote Control .............................................................................. 9
Installing Batteries ........................................................................... 9
Projector Status Indicators ..........................................................10
Accessories .......................................................................................11
Optional Extras ............................................................................... 11
Installing and Composition
Installation Precautions .................................................................12
Basic Operation of the Projector ...............................................13
Kensington Security System .......................................................14
Turning on the Projector ..............................................................15
Turning off the Projector .............................................................. 15
Focus and Position of the Screen Image ................................16
Selecting input mode ................................................................... 16
Connection
Connecting to a Desktop PC ...................................................... 17
Connecting to a Video Source ................................................... 17
Connecting to a DVD Player .......................................................18
Connecting to a D-TV Set-Top Box ..........................................18
Function
PICTURE Menu Options
Picture mode ...................................................................................19
Adjusting Picture Mode ................................................................19
Advanced Control Function ........................................................20
Color Temperature Function ........................................................ 21
Picture Reset Function .................................................................. 21
SCREEN Menu Options
To Change PJT Mode ..................................................................22
Using Aspect Ratio Function .....................................................22
Using Keystone Function ............................................................22
Auto Configure Function .............................................................23
RGB Config. Function ..................................................................23
Using Digital Zoom Function ..................................................... 23
Using the Still Function ...............................................................24
AUDIO Menu Options
Adjusting Volume .......................................................................... 25
Function Audio ...............................................................................25
Adjusting Speaker Balance ........................................................25
Adjusting Treble .............................................................................26
Adjusting Bass ............................................................................... 26
TIME Menu Options
Sleep time Function ..................................................................... 27
Auto Off Function ......................................................................... 27
Presentation timer Function .......................................................28
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream
through designated collection facilities appointed by your government or your local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the
environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office,
waste disposal service or the shop where you purchased the product.
5. The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this
product with general household waste. Disposal of this product must be carried out in accordance to
the regulations of your local authority.
Contents
OPTION Menu Options
Selecting Language .....................................................................29
Using Blank Function ...................................................................29
Selecting Blank image .................................................................29
Screen Capture Function ............................................................30
To adjust the brightness of the screen ...................................30
Using Monitor out Function .......................................................30
SET ID ............................................................................................... 31
Network Setup ................................................................................31
High Altitude Mode ......................................................................32
INFORMATION Menu Options
To See The Projector Information .............................................33
USB
To use the USB device
Connecting the USB device .......................................................34
Eject USB ........................................................................................34
Precautions when using the USB device ...............................35
PHOTO LIST
Screen Components ....................................................................36
Photo Selection and Popup Menu ...........................................36
Full Screen Menu .......................................................................... 37
MUSIC LIST
Screen Components ....................................................................38
Music Selection and Popup Menu ...........................................38
MOVIE LIST
Supported Movie File ................................................................... 39
Precautions when playing the DivX ........................................40
Screen Components ..................................................................... 41
Movie Selection and Popup Menu ............................................ 41
Playing the Movie ..........................................................................42
Option Menu Selection................................................................42
To See The DivX Registration Code.........................................43
Deactivation Function ...................................................................43
FILE VIEWER
Screen Components ....................................................................44
View File ...........................................................................................44
Information
Supported Monitor Display .........................................................45
Maintenance ...................................................................................45
Replacing the Lamp .....................................................................46
How to fix the lens cap to the projector .................................48
Memo ...............................................................................................49
Specifications .................................................................................50
Open Source Software Notice ....................................................51
3
Safety Instructions
Safety Instructions
Please take note of the safety instructions to prevent any potential accident or misuse of the projector.
ᰶ Safety Instructions are given in two forms as detailed below.
WARNING : The violation of this instruction may cause serious injuries and even death.
NOTES : The violation of this instruction may cause injuries or damage to the projector.
After reading this manual, keep it in the place that you can access easily.
ᰶ
Indoor Installation WARNING
Do not place the Projector in direct
sunlight or near heat sources such
as radiators, fires, stove etc.
This may cause a fire hazard!
Do not block the vents of the projector or restrict air-flow in any way.
This would cause the internal temperature to increase and could cause a fire
hazard or damage to the unit!
Do not use the projector in a
damp place such as a bathroom
where it is likely to get wet.
This may cause a fire or an electric
shock hazard!
Do not place flammable materials in, on or near the projector.
This may cause a fire hazard!
Do not place the projector close
to sources of steam or oil such
as a humidifier.
This may create a fire hazard or an
electric shock hazard!
Do not place the projector directly on a carpet, rug or place where
ventilation is restricted.
This would cause its internal temperature to increase and might create a
fire hazard or damage the unit.
Indoor Installation NOTES
When installing the projector on
a table, be careful not to place it
near the edge.
The projector could fall causing injury
and damage to the projector.
Only use a suitable stand.
Disconnect from the power supply and remove all connections
before moving, or cleaning.
Do not hang on the installed
projector.
It may cause the projector to fall,
causing injury or death.
Do not place the projector where
it might be exposed to dust.
This may cause a fire hazard or
damage to the unit!
Ensure good ventilation around the
projector. The distance between
the projector and the wall should
be more than 30 cm.
An excessive increase in its internal
temperature may cause a fire hazard or
damage to the unit!
Only use the projector on a level
and stable surface.
It may fall and cause injury and/or
damage to the unit.
Power WARNING
Earth wire should be connected.
Ensure that you connect the earth ground
wire to prevent possible electric shock (That
is a Projector with a three-prong grounded
AC plug must be connected to a threeprong grounded AC outlet).
If grounding methods are not possible, have
a qualified electrician install a separate circuit
breaker.
Do not try to ground the unit by connecting
it to telephone wires, lightening rods, or gas
pipes.
4
The power cord should be inserted
fully into the power outlet to avoid
a fire hazard!
This may cause a fire hazard or damage
the unit.
Do not place heavy objects on
the power cord.
This may cause a fire or an electric
shock hazard!
Power WARNING
Safety Instructions
Never touch the power plug with
a wet hand.
This may cause an electric shock
hazard!
Power NOTES
Hold the plug firmly when
unplugging. If you pull the cord,
it may be damaged.
This may cause a fire hazard!
Place the projector where people
will not trip or tread on the power
cord.
This may cause a fire or an electric
shock hazard or damage to the unit!
Using WARNING
Do not place anything containing
liquid on top of the projector
such as flowerpot, cup, cosmetics or candle.
This may cause a fire hazard or
damage to the unit!
Do not plug-in too many items
into one power outlet.
It may result in overheating of the outlet and create a fire hazard!
Do not use if the power cord or
the plug is damaged or any part
of the power outlet is loose.
This may cause a fire or an electric
shock hazard or damage to the unit!
Prevent dust from collecting on
the power plug pins or outlet.
This may cause a fire hazard!
Ensure the power cord does not
come into contact with sharp or
hot objects.
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not turn the projector On/Off by plugging-in or unplugging the
power plug to the wall outlet.
(Allow the unit to cool before removing power.)
It may cause mechanical failure or could cause an electric shock.
In case of impact shock or damage
to the projector switch it off and
unplug it from the power outlet and
contact an authorized service center.
This may cause a fire or an electric shock
hazard or damage to the unit!
Do not allow any objects to fall
into the projector.
This may cause an electric shock hazard or damage to the unit!
If water is spilt into the projector unplug it from the power supply
immediately and consult your Service Agent.
This may cause an electric shock hazard or damage to the unit!
Do not remove any covers. High
risk of Electric Shock!
Don’t look directly into the lens
when the projector is in use. Eye
damage may occur!
Dispose of used batteries
carefully and safely.
In the case of a battery being
swallowed by a child please consult
a doctor immediately.
Do not touch metal parts during
or soon after operation since the
vents will remain very hot!
CAUTION concerning the Power Cord
It is recommend that most appliances be placed on a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits.Check the specification
page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous.Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
5
Safety Instructions
Using WARNING
If the projector is in a room that experiences a gas leak, do not touch
the projector.
It can cause a fire or a burn by a spark.
Using NOTES
Do not place heavy objects on
top of projector.
This may cause mechanical failure or
personal injury!
Do not use any sharp tools on
the projector as this will damage
the casing.
Take care not to impact the lens
particularly when moving the
projector.
In the event that an image does
not appear on the screen please
switch it off and unplug it from the
power outlet and contact your
Service Agent.
This may cause a fire or an electric
shock hazard or damage to the unit!
Cleaning WARNING
Do not use water while cleaning
the projector.
This may cause damage to the projector or an electric shock hazard.
In the unlikely event of smoke or
a strange smell from the projector, switch it off, unplug it from
the wall outlet and contact your
dealer or service center.
This may cause a fire or an electric
shock hazard or damage to the unit!
Always open the lens door or
remove the lens cap when the
projector lamp is on.
Do not touch the lens of the projector. It is delicate and easily
damaged.
Do not drop the projector or
allow impact shock.
This may cause mechanical failure or
personal injury!
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
Cleaning NOTES
Contact the Service
Center once a year to
clean the internal
parts of the projector.
Accumulated dust can
cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and
wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet
cloth. Especially, never use cleanser (glass cleaner), automobile or industrial
shiner, abrasive or wax, benzene, alcohol etc., which can damage the product.
Use an air spray or soft cloth that is moist with a neutral detergent and water
for removing dust or stains on the projection lens.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
Others WARNING
Do not attempt to service the projector yourself. Contact your dealer or service center.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty!
Others NOTES
Do not mix new batteries with old
batteries.
This may cause the batteries to overheat and leak.
Be sure to unplug if the projector is
not to be used for a long period.
Accumulated dust may cause a fire hazard or damage to the unit!
6
Only use the specified type
of battery.
This could cause damage to the
remote control.
Names of parts
Names of parts
Main Body
* The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black
points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not
always indicate a malfunction.
Control panel
Lamp cover
POWER Button
Zoom ring
Focus ring
Foot adjusting button
Control Panel
Displays or closes menus.
Adjusts functions of menus.
It automatically corrects the
position and the shaking of the
MENU Button
ġ/Ģ/˘/˚ Button
AUTO Button
image at the RGB mode.
Front remote control sensor
INPUT Button
Switches to RGB1, RGB2, Component1,
Component2, HDMI, Video mode.
OK Button
Checks present mode and saves the
change of functions.
POWER Button
Turns ON/OFF the projector.
7
Names of parts
Connecting Part
RGB 2 IN
RGB 1 IN
AC IN
Kensington Security
System Connector
(Refer to page 14)
RGB OUT
LAN
AUDIO IN
HDMI/DVI
Headphone port
RS-232C
VIDEO
USB
IR (Remote control sensor)
*
Do not block the IR port for normal
operation of remote control.
* When using HDMI/USB connector, if the size of the jack connecting
to the connector is too big, they may not be connected. Please use
standard size jack.
8
Remote Control
Names of parts
INPUT Button
POWER Button
MUTE Button
VOLUME ġ/Ģ Button
RATIO Button
Button
MENU
OK, ġ/Ģ/˘/˚ Button
MARK Button
6G
Button
KEYSTONE Button
USB Button
BLANK Button
PAGE ġ/Ģ Button
AUTO Button
Q.MENU Button
SLEEP Button
BACK Button
O2U#
Button
STILL Button
( Functions as the STILL button in
any mode other than DivX.)
TIMER Button
Zoom Button
Installing Batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• Open the battery compartment cover on the back of the remote control.
• Insert the specified type of batteries with correct polarity, match “+” with “+”,
and match “-” with “-”.
• Install two 1.5V AAA batteries. Don’t mix used batteries with new batteries.
9
Names of parts
Projector Status Indicators
* Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status
of the projector.
Lamp indicators
Operation Indicator
/ Temperature
Indicator
Lamp Indicator
Red
Green(flashing)
Green
Orange(flashing)
Off
Orange
Red(flashing)
Red
Red(flashing)
Green (flashing)
Orange(flashing)
Operation Indicator
/ Temperature
Indicator
Standby.
Lamp is starting up.
Unit is in operation (Lamp is turned on)
The lamp is cooling (10 seconds).
The projector has been turned off due to excessive heat
(1 minute and 30 seconds).
Power off.
Standby-This mode cools the projector naturally for 4
minutes after it is turned off.
This is the warning message of excessive heat when the
projector is on. Turn the projector off and check the ventilator.
Power has turned off due to problem with the internal
cooling fan. Contact your service center.
Projector lamp is reaching the end of its life and needs
to be replaced with a new lamp.
An error has occurred in the projector lamp. Turn the projector
on again after sufficient amount of time. If this indicator
flashes red again, contact your local service center.
The lamp cover is open.
This indicates Color Wheel Motor or Color Wheel Index problem.
Please contact your local service center.
10
Accessories
Installing and Composition
Remote Control
Power Cord
AAA Battery
Computer Cable
Owner’s manual
Lens cap and Strap
CD Owner’s manual
Optional Extras
* Contact your dealer to purchase these items.
* Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added.
Ceiling mount for projector
Projection Screen
Component Cable
RCA to D-Sub Adapter
Lamp
HDMI Cable
Video Cable
LAN
Cable
RS-232CCable
HDMI to DVI Cable
11
Loading...