LG BWJ1V user manual
Charge Safety cautions
MBM66277335
DM
d/M
d
DM
d/M
Power on / off
Set voice guide function
Derma LED Mask
Model name
BWJ1V
1903_Rev01
Press the 1 (power) button for a
long while (until you can hear the
voice guidance).
(Voice guide
Guide off (mute)
Sound effect guide
)
Language Setting
DM
c
b
a
Press the 1 (power) button for a
short while.
It will not work while charging.
Start / Pause
DM
Press the 1 (power) button and the DM (Start/
Press the DM (Start/Pause) button for a
short while.
Pause) button at the same time for a long while
(until you can hear the voice guidance).
(Chinese English)
y When using this device, depending on individual skin
condition, it may cause a variety of skin irritation.
If such irritation persists, please reduce the number of use.
y In the following cases, it is recommended to use the device
after consultation with a specialist.
- Allergies skin, acne, dermatitis, skin treatment, cosmetic
surgery or hair loss surgery
- Wearing a cardiac pacemakers, device implantation or a
metal prosthetic device
y As a facial treatments only, it is not recommended to use
for a body.
y Do not make direct eye contact with LED light in operation.
Excessive exposure to the light can cause eye damage.
y Recommend using the product once a day. Using more than
twice a day may cause burning sensation on skin.
y Before using the device, if you are currently undergoing
dermatology related treatment or have skin problems,
consult your dermatologist and then use it.
y Pregnancy, menstruation, lactating women are not
recommended for use. (Unstable hormonal balance may
cause temporary skin trouble.)
y Do not use the device for purposes other than those set
out in this guideline.
y Please pay attention to using cosmetics that contain the
following ingredients as it may reduce the effect.(For
example: denatured alcohol, sunscreen, retinol, oil)
BWJ1V.ACHNLLK_ENG_QSG_MBM66277335.indd 1,3-5 2019-03-04 �� 5:08:42
How to Use
d/M
c
d
e
f
a b
d/M
Wash the face. Apply the appropriate
skin / lotion to your skin.
BWJ1V.ACHNLLK_ENG_QSG_MBM66277335.indd 6,8-10 2019-03-04 �� 5:09:01
Connect the cable of
Derma LED Mask to the
port of the controller.
Turn on by pressing the
1 (Power) button.
Wear the Derma LED Mask as if wearing eye
glasses.
Press the DM (Start/Pause) button to begin
skincare.
If it does not work after wearing the mask, please let
your skin close adhere to the proximity sensor in the
middle of the wearing part.
Loading...