Derma LED Mask
Model name
BWJ1 BWJ2
1808_Rev02
Charge
Charge
on the
cradle
Charge
directly
on the
controller
a
c
d
a
b
b
c
Power on / off
Press the 1 (power) button for a
short while.
It will not work while charging.
Start / Pause
Press the DM (Start/Pause) button for a
short while.
Set voice guide function
Safety cautions
y Stop using the device if there is smoke or an odor. In
such cases turn off the power immediately, pull out
the charging adapter and contact the service center.
y Always use the provided charging adapter.
y Damaged battery may cause explosion.
y Do not disassemble, repair, or remodel this product.
Press the 1 (power) button for a
long while (until you can hear the
voice guidance).
(Voice guide
DM
Guide off (mute)
Sound effect guide
)
DM
Language Setting
y Handle the power plug with dry hands.
y Do not make direct eye contact with LED light when
devices with LED is in operation. Excessive exposure
to the light can cause eye damage.
y Recommend using the product once a day. Using
more than twice a day may cause burning sensation
on skin.
y Before using the device, if you are currently
undergoing dermatology related treatment or have
skin problems, consult your dermatologist and then
use it.
y Pregnancy, menstruation, lactating women are not
recommended for use. (Unstable hormonal balance
Press the 1 (power) button and the DM (Start/
Pause) button at the same time for a long while
(until you can hear the voice guidance).
(Hong Kong Chinese English Chinese)
may cause temporary skin trouble.)
y Do not use the device for purposes other than those
set out in this guideline.
BWJ1_AHKG_QSG_ENG_���.indd 1,3-5 2018-08-16 �� 5:49:59
How to Use
c
d
e
f
a b
d/M
Wash the face. Apply basic skincare
products.
BWJ1_AHKG_QSG_ENG_���.indd 6,8-10 2018-08-16 �� 5:50:12
Connect the cable of
Derma LED Mask to the
port of the controller.
Turn on by pressing the
1 (Power) button.
Wear the Derma LED Mask as if wearing eye
glasses.
Press the DM (Start/Pause) button to begin
skincare.
If it does not work after wearing the mask, please let
your skin close adhere to the proximity sensor in the
middle of the wearing part.