LG BTM900 Users manual
1
Appearance
English
1. Right Button
2. Scrolling Wheel
3. Left Button
4. Low-Power-Alert LED (Orange)
5. Spare USB Power Supply Jack
6. Sensor LED (Red)
7. Upper Cover Lock
8. Receiver Link Button
9. Power Switch
Before Using
1. Install Batteries.
2. Turn the power on.
3. Pair the BTM-900 Bluetooth Mouse with your computer.
Install Batteries
Note : Ple ase m ake sure t hat y our B luetoot h so ftwa re sup ports HID (Human
Interface Device) profile before the pairing process.
Un-lock the Upper Cover Lock.
1.
2
English
Remove the upper cover.
Install two AAA batteries into the
BTM-900 Bluetooth Piano Mouse’s
battery slot (if you had installed the
batteries, please remove the old one
before install the new batteries).
2.
3.
Pairing Process
- For Windows XP SP2
Press the Pairing button on the
bottom of the mouse for connection
link.
1.
Open the Windows control panel, then select “Bluetooth devices”.
Click “Add…”
Select “My device is setup and ready to be found”, then click “Next”.
In “Peripherals (keyboards, mice, joysticks)”, select BTM-900, then
click “Next”.
Select “Don’t use a passkey”, then click “Next”.
The windows will start to connect BTM-900 automatically. Please
press Finish button after the connection process completed.
2.
3.
4.
5.
6.
7.
Onc e th e c onnect ion betw een BTM -900 Blu eto oth Mouse an d your
computer is established, the connection will keep permanently. That means
the connection will re-establish automatically when the Windows runs.
Loading...