LG ARNU07GSJN4 User guide

OWNER’S MANUAL

Read this owner's manual thoroughly before operating the appliance and
keep it handy for reference at all times.

TYPE : Wi-Fi MODEM

Original instruction

MFL67891033
Rev.36_040619

www.lg.com

Copyright © 2017 - 2019 LG Electronics Inc. All Rights Reserved.

БЪЛГАРСKИ

ENGLISH ITALIANO

GAEILGE

HRVATSKI

SRPSKI

РУССКИЙ ЯЗЫК

ESPAÑOL

ČEŠTINA EESTI KEEL MALTI ROMÂNĂ

УКРАÏНСЬКА

FRANÇAIS

DEUTSCH

ҚАЗАҚ ТІЛІ

БЕЛАРУСКАЯ МОВА

ΕΛΛΗΝΙΚΆ

PORTUGUÊS

OʻZBEK TILI

SLOVENČINA

SLOVENŠČINA

NEDERLANDS

LATVIEŠU

POLSKI

LIETUVIŲ

MAGYAR

ENGLISH

SMART FUNCTIONS

Using LG SmartThinQ Application

Things to check before using LG SmartThinQ

• For appliances with the logo

1. Check the distance between the appliance and the wireless router
(Wi-Fi network).

• If the distance between the appliance and the wireless router is

too far, the signal strength becomes weak. It may take a long
time to register or installation may fail.

2. Turn off the Mobile data or Cellular Data on your smartphone.

• For iPhones, turn data off by going to Settings → Cellular →

Cellular Data.

3. Connect your smartphone to the wireless router.

2

SMART FUNCTIONS

• To verify the Wi-Fi connection, check that Wi-Fi icon on the

control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi networks only. To check

your network frequency, contact your Internet service provider
or refer to your wireless router manual.

• LG SmartThinQ is not responsible for any network connection

problems or any faults, malfunctions, or errors caused by
network connection.

• If the appliance is having trouble connecting to the Wi-Fi

network, it may be too far from the router. Purchase a Wi-Fi
repeater (range extender) to improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may be interrupted

because of the home network environment.

• The network connection may not work properly depending on

the Internet service provider.

• The surrounding wireless environment can make the wireless

network service run slowly.

• The appliance cannot be registered due to problems with the

wireless signal transmission. Unplug the appliance and wait
about a minute before trying again.

• If the firewall on your wireless router is enabled, disable the

firewall or add an exception to it.

• The wireless network name (SSID) should be a combination of

English letters and numbers. (Do not use special characters.)

• Smartphone user interface (UI) may vary depending on the

mobile operating system (OS) and the manufacturer.

• If the security protocol of the router is set to WEP, you may fail

to set up the network. Please change it to other security
protocols (WPA2 is recommended) and register the product
again.

ENGLISH

3