LG 55LJ550T, 55LJ5550, 55LJ5500 Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

32LJ600B	43LJ550T	49LJ550T	55LJ550T
32LJ600D	43LJ5500	49LJ5500	55LJ5500
	43LJ5550	49LJ5550	55LJ5550

	*MFL69728302*	www.lg.com
		P/NO : MFL69728302 (1703-REV01)

Warning! Important Safety instructions

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated dangerous

voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The symbol is intended to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature accompanying the device.

<![if ! IE]> <![endif]>ENGLISH	WARNING : TO REDUCE THE RISK OF FIRE
	AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
	PRODUCT TO RAIN OR MOISTURE.
	••Do not use this apparatus near water.
	••Clean only with dry cloth.
	••Do not block any ventilation openings. Install in
	accordance with the manufacturer’s instructions.
	••Do not install near any heat sources such
	as radiators, heat registers, stoves, or other
	apparatus (including amplifiers) that produce
	heat.
	••Do not defeat the safety purpose of the
	polarized or grounding-type plug. A polarized
	plug has two blades with one wider than the
	other. A grounding type plug has two blades
	and a third grounding prong. The wide blade or
	the third prong are provided for your safety. If
	the provided plug does not fit into your outlet,
	consult an electrician for replacement of the
	obsolete outlet.
	••Protect the power cord from being walked on
	or pinched particularly at plugs, convenience
	receptacles, and the point where they exit from
	the apparatus.
	••Only use attachments/accessories specified by
	the manufacturer.

••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

••Unplug this apparatus during lightning storms or when unused for long periods of time.

••Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

••Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

••Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

••Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

••Concerning the Power Cord (Can differ by country): Check the specification page of this owner’s manual to be certain concerning current requirements. Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact replacement part by an authorized

servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. Do not

2

move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

••To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near

flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

••Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.

••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

••Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size

of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the

National Electrical Code, ANSI/NFPA 70

••Moving Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••If water or another substance enters the product (like an AC adapter, power cord, or TV), disconnect the power cord and contact the service center immediately. Otherwise, this may result in fire or electric shock.

••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

••Use only an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation.

••Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

••Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

••Keep the product away from direct sunlight.

••Never touch this apparatus or antenna during a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

<![if ! IE]>

<![endif]>ENGLISH

3

••DISCONNECTING THE DEVICE FROM THE MAIN POWER The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

••Make sure the power cord is connected securely to the power plug on the TV.

••Batteries Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

••Cleaning When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

<![if ! IE]>

<![endif]>ENGLISH

Preparing

••When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

••Image shown may differ from your TV.

••Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

••The available menus and options may differ from the input source or product model that you are using.

••New features may be added to this TV in the future.

••The items supplied with your product may vary depending upon the model.

••Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

••For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.

••Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

••Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

••Recommended HDMI cable types -- High-Speed HDMI®/™ cable

-- High-Speed HDMI®/™ cable with Ethernet

AA

*A10 mm *B18 mm

••Do not use any unapproved items to ensure the safety and lifespan of the product.

••Any damages or injuries by using unapproved items are not covered by the warranty.

••Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

••When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

••Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

••Do not fasten the screws with excessive force otherwise they may be worn out and become loose.

4

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

••It is recommended to move the TV in the box or packing material that the TV originally came in.

••Before moving or lifting the TV, disconnect the power cord and all cables.

••When holding the TV, the screen should face away from you to avoid damage.

••Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

••Use at least two people to move

a large TV.

••When transporting the TV by

hand, hold the TV as shown in the following illustration.

••When transporting the TV, do not expose the TV to jolts or excessive vibration.

••When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

••When handling the TV, be careful not to damage the protruding buttons.

••Avoid touching the screen at all times, as this may result in damage to the screen.

••Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

••Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)

Using the Button

You can operate the TV by pressing the button.

Basic Functions

Power On (Press)

Power Off 1 (Press and Hold)

Menu control (Press 2)

Menu selection (Press and Hold 3)

1All running apps will close, and any recording in progress will stop.

2You can access and adjust the menu by pressing the button when TV is on.

3You can use the function when you access menu control.

Adjusting the Menu

When the TV is turned on, press thebutton one time. You can adjust the Menu items pressing the buttons.

Turns the power off.

Changes the input source.

Scrolls through the saved channels.

Adjusts the volume level.

<![if ! IE]>

<![endif]>ENGLISH

5

Mounting on a Table

1Lift and tilt the TV into its upright position on a table.

-- Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm
10 cm
10	cm

2 Connect the power cord to a wall outlet.

••Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

<![if ! IE]> <![endif]>ENGLISH		Securing the TV to a Wall (optional)
		(Depending upon model)

1Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.

-- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

••Make sure that children do not climb on or hang on the TV.

••Use a platform or cabinet that is strong and large enough to support the TV securely.

••Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall

mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

10 cm

10 cm 10 cm

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

6

32LJ600B 49LJ550T 32LJ600D 49LJ5500 Model 43LJ550T 49LJ5550 43LJ5500 55LJ550T 43LJ5550 55LJ5500 55LJ5550

VESA (A x B)	200 x 200	300 x 300
Standard screw	M6	M6
Number of screws	4	4
Wall mount bracket	LSW240B	LSW350B
(optional)	MSW240	MSW240

A

B

••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

••When using the wall mount, it is recommended that you apply a piece of tape over the Stand holes to prevent dust and bugs from entering the holes. (Depending upon model)

Stand hole

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

••The external device connections shown may differ slightly from illustrations in a manual.

••Connect external devices to the TV regardless about the order of the TV port.

••If you connect a gaming device to the TV, use the cable supplied with the gaming device.

••Refer to the external equipment’s manual for operating instructions.

••In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC

output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the Picture menu until the picture is clear.

••When connecting via a wired LAN, it is recommended to use a CAT 7 cable.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

••Make sure not to bend the copper wire of the RF cable.

Copper wire

••Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

••To improve the picture quality in a poor signal area, purchase a signal amplifier.

••Use a signal splitter to use 2 TVs or more.

••If the antenna is not installed properly, contact your dealer for assistance.

••DTV Audio Supported Codec (Depending upon country) : MPEG, AAC, HE-AAC, Dolby Digital, Dolby Digital Plus

<![if ! IE]>

<![endif]>ENGLISH

7

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

••HDMI Audio Supported Format: DTS (44.1 kHz / 48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) (Depending on model)

Remote Control

(Some buttons and services may not be provided depending on models or regions.)

	The descriptions in this manual are based on
	the buttons on the remote control. Please read
	this manual carefully and use the TV correctly. To
	install batteries, open the battery cover, replace
	batteries (1.5 V AAA) matching the and ends
	to the label inside the compartment, and close
	the battery cover. Failure to match the correct
	polarities of the batteries may cause the battery
<![if ! IE]> <![endif]>ENGLISH	to burst or leak, resulting in fire, personal injury,
	or ambient pollution. To remove the batteries,
	perform the installation actions in reverse. This
	remote uses infrared light. When in use, it should
	be pointed in the direction of the TV’s remote
	sensor.

A

A

(Power) Turns the TV on or off.

Returns to the last TV channel.

Toggles between Radio, TV, CATV, and DTV.

Activates or deactivates the subtitles.

Activates your preferred subtitle in digital mode.

(Q.Settings) Accesses the Quick Settings.

(Search) Shows the search mode.

(Input) Changes the input source. Number button Enters numbers.

(Dash) Inserts a dash between numbers such as 2-1 and 2-2.

Accesses the saved channel list.

* You can use the application by selecting the number as you edited while using apps or watching Live TV.

Alternates between the two last channels selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Shows information on the current program.

(Mute) Mutes all sounds.

Scrolls through the saved channels.

Moves to the previous or next screen.

B

8

B

Streaming Service buttons Connects to the Video Streaming Service.

(Home) Accesses the Home menu.

••Pressing and holding the (Home) button displays the previous history.

Displays the program event according to time scheduler.

By zooming in on the selected area, you can view it in full screen.

Navigation button (up / down / left / right) Scrolls through menus or options.

Selects menus or options and confirms your input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV viewing.

Optimizes picture and audio settings for soccer.

Starts to record. (Only Time Machine Ready supported model)

, , , , Control buttons for media contents

* Provides content related to the program you are currently watching.

Color buttons ( Red, Green, Yellow, Blue) These access special functions in some menus.

* To use the button, press and hold for more than 3 seconds.

External Control Device Setup

To obtain the external control device setup information, please visit www.lg.com.

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for three

(3) years from the date on which you purchased the product.

Licenses

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

<![if ! IE]>

<![endif]>ENGLISH

Troubleshooting

••Cannot control the TV with the remote control. -- Check if anything such as tape has been placed

over the receiver.

-- Check if there is any obstacle between the product and the remote control.

-- Replace the batteries with new fresh ones.

••No image display and no sound is produced. -- Check if the product is turned on.

-- Check if the power cord is connected to a wall outlet.

-- Check if there is a problem in the wall outlet by connecting other products.

••The TV turns off suddenly.

-- Check the power control settings. The power supply may be interrupted.

-- Check if the Timer Power Off / Sleep Timer feature is activated in the Timers settings.

-- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

9

<![if ! IE]>

<![endif]>ENGLISH

••Abnormal Display

-- If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue

spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

-- This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability

of the TV.

-- Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.

••Generated Sound

-- Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

-- Electrical circuit humming/panel buzzing

A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product.

This generated sound does not affect the performance and reliability of the product.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

The energy information provided on the product is shown in accordance with the applicable regulations of each respective country (Depending upon the country).

-- The Energy consumption was measured in accordance with IEC 62087.

The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).

Television System (* : A~Z)

	For LJ5500, LJ5550,	NTSC, PAL-M/N, SBTVD
	LJ600B-S* series
	For LJ550T,	NTSC, PAL-M/N, DVB-T,
	LJ600D-D* series	DVB-T2

Program Coverage (* : A~Z)

For LJ5500, LJ5550,	VHF 2-13, UHF 14-69,
LJ600B-S* series	DTV 2-69, CATV 1-135
For LJ550T,	VHF 2-13, UHF 14-69,
LJ600D-D* series	DTV 2-69, CATV 1-125

External Antenna Impedance

75 Ω

Environment condition

••Operating Temperature

0 °C to 40 °C

••Operating Humidity

Less than 80 %

••Storage Temperature

-20 °C to 60 °C

••Storage Humidity

Less than 85 %

10

Wireless Module (LGSWFAC71)

Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range	Output Power (Max.)
2400 to 2483.5 MHz	15 dBm
5150 to 5725 MHz	14.5 dBm
5725 to 5850 MHz	14.5 dBm

••As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

••For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

••FCC ID: BEJLGSWFAC71 / IC: 2703H-LGSWFAC71

Regulatory

WARNING!

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

••Using cabinets or stands recommended by the manufacturer of the television set.

••Only using furniture that can safely support the television set.

••Ensuring the television set is not overhanging the edge of the supporting furniture.

••Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

••Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

••Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

<![if ! IE]>

<![endif]>ENGLISH

11

The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service.

MODEL

SERIAL

OWNER’S MANUAL

EXTERNAL CONTROL DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 KEY CODES

KEY CODES

• This feature is not available for all models.

	Code	Function	Note	Code	Function	Note
	(Hexa)			(Hexa)
	00	CH +, PR +	R/C Button	53	List	R/C Button
	01	CH -, PR -	R/C Button	5B	Exit	R/C Button
	02	Volume +	R/C Button	60	PIP(AD)	R/C Button
	03	Volume -	R/C Button	61	Blue	R/C Button
	06	> (Arrow Key / Right Key)	R/C Button	63	Yellow	R/C Button
	07	< (Arrow Key / Left Key)	R/C Button	71	Green	R/C Button
	08	Power	R/C Button	72	Red	R/C Button
	09	Mute	R/C Button	79	Ratio / Aspect Ratio	R/C Button
	0B	Input	R/C Button	91	AD (Audio Description)	R/C Button
	0E	SLEEP	R/C Button	9E	LIVE MENU	R/C Button
	0F	TV, TV/RAD	R/C Button	7A	User Guide	R/C Button
	10 - 19	* Number Key 0 - 9	R/C Button	7C	Smart / Home	R/C Button
	1A	Q.View / Flashback	R/C Button	7E	SIMPLINK	R/C Button
	1E	FAV (Favorite Channel)	R/C Button	8E	►► (Forward)	R/C Button
	20	Text (Teletext)	R/C Button	8F	◄◄ (Rewind)	R/C Button
	21	T. Opt (Teletext Option)	R/C Button	AA	Info	R/C Button
	28	Return (BACK)	R/C Button	AB	Program Guide	R/C Button
	30	AV (Audio / Video) Mode	R/C Button	B0	► (Play)	R/C Button
	39	Caption/Subtitle	R/C Button	B1	(Stop / File List)	R/C Button
	40	Λ (Arrow Key / Cursor Up)	R/C Button	B5	RECENT	R/C Button
	41	V (Arrow Key / Cursor	R/C Button	BA	(Freeze / Slow Play /	R/C Button
		Down)			Pause)
	42	My Apps	R/C Button	BB	Soccer	R/C Button
	43	Menu / Settings	R/C Button	BD	(REC)	R/C Button
	44	OK / Enter	R/C Button	DC	3D	R/C Button
	45	Q.Menu	R/C Button	99	AutoConfig	R/C Button
	4C	List, - (ATSC Only)	R/C Button	9F	App / *	R/C Button
	4D	PICTURE	R/C Button	9B	TV / PC	R/C Button
	52	SOUND	R/C Button

*Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)

EXTERNAL CONTROL DEVICE SETUP 3

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

*Please be advised that not all models support this type of connectivity.

*Cable is not provided.

USB to Serial converter with USB Cable

USB Type

(PC)

<![if ! IE]> <![endif]>USB IN

(TV)

•LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG.

•It can be purchased from computer stores that carry accessories for IT support professionals.

RS-232C With RS232C Cable

DE9 (D-Sub 9pin) Type

•You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual.

	RS-232C IN
(PC)	(CONTROL & SERVICE)	(TV)

The connection interface may differ from your TV.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 EXTERNAL CONTROL DEVICE SETUP

Phone jack Type

•You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual.

*For other models, connect to the USB port.

*The connection interface may differ from your TV.

	3		1	<![if ! IE]> <![endif]>ONLY
(PC)				<![if ! IE]> <![endif]>SERVICE	(TV)
		2
- or
	3		1
(PC)				RS-232C IN
		2		(CONTROL & SERVICE)

Customer Computer	RS-232C configurations
	3-Wire Configurations(Not standard)
1	5		PC	TV
	RXD	2			2	TXD
	TXD	3			1	RXD
	GND	5			3	GND
6	9			OR
RS-232C	RXD	3			2	TXD
(Serial port)	TXD	2			1	RXD
	GND	5			3	GND
		D-Sub 9		Phone

Set ID

For Set ID number, see "Real Data Mapping" on p.6

1.Press SETTINGS to access the main menus.

2.Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3.Press the Navigation buttons to scroll to SET ID and press OK.

4.Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5.When you are finished, press EXIT.

*(Depending on model)

			EXTERNAL CONTROL DEVICE SETUP 5
Communication Parameters
•	Baud rate : 9600 bps (UART)	•	Stop bit : 1 bit
•	Data length : 8 bits	•	Communication code : ASCII code
•	Parity : None	•	Use a crossed (reverse) cable.

Command reference list

(Depending on model)

			COMMAND1	COMMAND2	DATA
					(Hexadecimal)
	01.	Power*	k	a	00 to 01
	02. Aspect		k	c	(p.7)
	Ratio
	03.	Screen	k	d	(p.7)
	Mute
	04.	Volume	k	e	00 to 01
	Mute
	05.	Volume	k	f	00 to 64
	Control
	06.	Contrast	k	g	00 to 64
	07.		k	h	00 to 64
	Brightness
	08.	Color/	k	i	00 to 64
	Colour
	09.	Tint	k	j	00 to 64
	10.		k	k	00 to 32
	Sharpness
	11. OSD		k	l	00 to 01
	Select
	12.	Remote
	Control Lock		k	m	00 to 01
	Mode
	13.	Treble	k	r	00 to 64
	14.	Bass	k	s	00 to 64

			COMMAND1	COMMAND2	DATA
					(Hexadecimal)
	15.	Balance	k	t	00 to 64
	16.	Color
	(Colour)		x	u	00 to 64
	Temperature
	17.	ISM
	Method (Only		j	p	(p.8)
	Plasma TV)
	18.	Equalizer	j	v	(p.8)
	19.	Energy	j	q	00 to 05
	Saving
	20. Tune		m	a	(p.9)
	Command
	21.	Channel	m	b	00 to 01
	(Programme)
	Add/Del(Skip)
	22. Key		m	c	Key Codes
	23.	Control	m	g	00 to 64
	Backlight,
	Control Panel
	Light
	24.	Input	x	b	(p.11)
	select (Main)
	25.	3D (Only	x	t	(p.11)
	3D models)
	26.	Extended	x	v	(p.12)
	3D (Only 3D
	models)
	27. Auto		j	u	(p.12)
	Configure

* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG.

With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6 EXTERNAL CONTROL DEVICE SETUP

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV.

[Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.

*[Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on transmission/receiving protocol.

[DATA]	: To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr]	: Carriage Return - ASCII code ‘0x0D’
[ ]	: Space – ASCII code ‘0x20’

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

*The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

*The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.

Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

*When you enter the [data] in hexadecimal, refer to following conversion table.

*Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.

00	: Step 0	32 : Step 50 (Set ID 50)	FE : Step 254
01	: Step 1 (Set ID 1)	33 : Step 51 (Set ID 51)	FF : Step 255
...		...	...
0A : Step 10 (Set ID 10)		63 : Step 99 (Set ID 99)	01	00 : Step 256
...		...	...
0F : Step 15 (Set ID 15)		C7 : Step 199	27	0E : Step 9998
10	: Step 16 (Set ID 16)	C8 : Step 200	27	0F : Step 9999
...		...	...