Lexmark X9350 Quick Start Manual

START HERE

If you answer “yes”
to any of these
questions, turn to the
section indicated

Wireless USB

Do you want to connect the printer to a
wireless network?

Use the Wireless Setup and Connection.

Do you want to connect the printer
directly to the computer?

for Setup and
Connection
instructions.

Use the USB Setup and Connection.

Do you want to connect the printer to a
wired ethernet network?

Use the Wired Setup and Connection.

Wired

Wireless Setup and Connection

Wireless

Before you start

Find the following wireless network
settings. See your wireless documentation,
or contact the person who set up your
wireless network.

• The name of your wireless network

(SSID)

• The type of security you use to protect

your wireless network

• The password for your wireless

network

2

Temporarily move the printer
near the computer.

1

3

You need the following items to
complete Wireless Setup:

Power cord

Installation CD

Load paper.

Wireless Configuration Cable

Telephone cord

Print cartridges

4

Wireless

Prepare the printer.

5

Adjust the settings.

1 Press or to select the

language.

2 Press to locate the Country

setting.

3 Press or to select the

country or region.

4 Press to scroll to Set Date

and Time, and then press .

2

1

1 Use the keypad to enter the time, and

use or to scroll between hours
and minutes.

2 Press or to scroll to AM, PM, or

24Hr, and use or to change
the setting.

3 Press or to scroll to Current

Date.

4 Use the keypad to enter the date, and

use or to scroll between day,
month, and year.

5 Press to save the settings.

Wireless

6

Insert the print cartridges.

1

2

7

1

2

The printer automatically aligns
the print cartridges and prints an
alignment page. This may take a
few minutes.

8

1

2

3

Make sure the computer is on, and then insert the
CD.

9

Important! If prompted,

click Cancel on any New
Hardware screens.

10

1 Select Network

Installation.

2 Click Next.
3 Read and accept the

license agreement.

Network Installation

11

Wireless

Click Next.

12

Click Setup Wireless.

13

Temporarily connect the Wireless
Network Configuration cable to the
printer and to your computer.

2

1

14

Select your
network, and then
click Next.

Wireless

15

If prompted, select the
type of security you use
to protect your wireless
network, and then click

Next.

16

If prompted, enter the
password or security
key(s) for your wireless
network.

17

Verify the network
settings are correct,
and then click Next.

Note: If you do not know this information,
see the wireless network documentation or
contact the person who set up your
wireless network.

18

Click Next.

Note: If you do not know this information,

see the wireless network documentation or
contact the person who set up your
wireless network.

19

Choose the printer
connection, and then click

Next.

20

Next >

When configuration is
complete, disconnect the
Wireless Network
Configuration cable, and
then click Next.

Wireless

Assign a name to the
computer, select an
optional PIN for security,
and then click Next.

To use the fax
feature, move the
printer near a
telephone wall jack,
and connect the
telephone cord to
both the printer and
the wall jack.

2221

Click Next.

If this is the only
computer on the
wireless network,
setup is
complete.

To print from other
computers on the
network, complete
steps 25–31, and
repeat until all
computers are
networked.

23

2524

Make sure the next
computer is on, and then
insert the CD.

Follow the instructions
on the screen to
complete installation.