Lexmark X850e, X85X Reference Guide
Lexmark™ X85x
Quick Reference
Loading paper and
4 Flex the sheets back and forth to loosen them,
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
Loading the multipurpose feeder
1 Lower the multipurpose feeder.
specialty media
Loading standard or optional 500sheet trays
1 Pull out the tray.
2 Squeeze the side guide tab, and slide the guide
to the outside of the tray.
5 Load print media in the tray with the print side
up.
6 Squeeze the side guide tab, and slide the guide
until it lightly rests against the edge of the
media.
7 Insert the tray.
2 Pull the tray extension out.
Note: Do not place objects on the
multipurpose feeder. Also, avoid
pressing down or applying
excessive force on it.
3 Slide the width guides to the outside of the
feeder.
4 Flex the sheets or envelopes back and forth to
loosen them, then fan them. Do not fold or
crease the print media. Straighten the edges on
a level surface.
3 Squeeze the front guide tab, and slide the guide
to the correct position for the media size you are
loading.
5 Load the media in the feeder.
Note: Make sure the print media is below
the max fill line. Overloading may
cause jams.
6 Slide the width guides until they lightly rest
against the edge of the media.
1 Pull out the tray.
2 Squeeze the front guide tab, and slide the guide
to the correct position for the size media you are
loading.
4 Load print media in the tray with the print side
up.
Note: Make sure the print media is below
the max fill line on the rear guide.
Overloading may cause jams.
5 Insert the tray into the MFP.
Loading the 2000-sheet high
capacity feeder
1 Pull out the tray.
7 Set the Paper Size and Paper Type for the
multipurpose feeder (MP Feeder Size and MP
Feeder Type) to the correct value for the print
media you loaded.
Loading the 2000-sheet dual input
trays
The 2000-sheet dual input drawer includes two trays:
an 850-sheet tray and an 1150-sheet tray. Although
the trays are different in appearance, they both load
the same way.
3 Flex the sheets back and forth to loosen them,
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
2 If loading print media with a different width or
length, adjust the width and length guides.
Loading...