Lexmark 6200 Series, P6250, 6250 - P Color Inkjet, P6210, P6260 Quick Start Manual
Lexmark Confidential until announced
Note: Contents may vary.
6200 Series All-In-One
Lift the paper support and
extend the paper exit tray.
Load plain paper.
*21B0070*
• Use only the power supply provided
with this product or the manufacturer's
authorized replacement power supply.
• Connect the power supply cord to an
electrical outlet that is near the product
and easily accessible.
• Refer service or repairs, other than
those described in the user
documentation, to a professional
service person.
CAUTION: Do not use the fax feature
during a lightning storm. Do not set up this
product or make any electrical or cabling
connections, such as the power supply
cord or telephone, during a lightning
storm.
Open the cartridge lids, insert the cartridges, and
snap the lids closed.
1
2
3
Left: Right:
Lower the paper feed guard,
squeeze the paper guide, and
slide it to the left edge of the paper.
3
2
1
Connect the power cord.
2
1
Make sure the
Power light is
on.
1
Prepare your All-In-One
2
1
Load paper
23
Unpack your All-In-One
2
Install the print cartridges
3
Close the scanner unit.
1
3
2
Press the right arrow button
to scroll to your language,
and then press Select
.
2
1
3
4
Press Select to print an
alignment page.
You may discard the
alignment page after it
prints.
Place the stored cartridge
in the storage area of your
All-In-One.
Keep a new or
partially used
cartridge in the
print cartridge
storage unit:
12
Cartridge storage
12
3
4
Prepare the print cartridges
Remove the sticker and tape from the print cartridges.
Warning: Do not touch the copper contact area on
the back or the metal print cartridge nozzles on the
bottom.
2
1
1
2
1
2
Remove the photo
cartridge from the
print cartridge storage
unit.
Lift the scanner unit.
1
5
Safety Information
If you are using your
All-In-One with a computer,
continue with “Install the
software”...
Lexmark Confidential until announced
P/N 21B0070 E.C. 21B004
© 2004 Lexmark International, Inc. All rights reserved.
Make sure your
computer is on.
Insert the CD.
• Refer to your User’s Guide.
• Visit our Web site: http://support.lexmark.com/.
• Call us at 1-800-332-4120.
Monday–Friday (9:00 AM–9:00 PM EST)
Saturday (Noon–6:00 PM EST)
Note: Phone number and support times may change
without notice.
Record the following information (located on your store
receipt and the back of your printer) and hav e it ready when
you contact us so that we may serve you faster:
Machine Type number_____________________________
Serial number____________________________________
Date purchased__________________________________
Store where purchased____________________________
Click Cancel on all New
Hardware screens.
Note: Do not continue until
all New Hardware
windows are
canceled.
Windows 98/Me
Windows 2000/XP
Install the software
12
3
4
Connect the USB cable.
2
1
5
Click Install and follow the
instructions on your screen to
complete the installation.
Make sure your
computer is on.
12
Connect the USB cable.
1
2
3
Insert the CD. If the installation screen does not appear
automatically, double-click:
1
2
6
To prevent errors during
installation:
1 Close all open programs.
2 Temporarily disable any anti-
virus software. For help,
refer to your program
documentation, or contact
the software manufacturer
for support.
Important: After installation is
complete, remember to
re-enable your anti-vir u s
software.
If this installation screen does not
appear:
1 Click Cancel on any New Hardware screens.
2 Eject and reinsert the All-In-One software CD.
If the All-In-One software install screen does not
appear:
a From your desktop, double-click My
Computer (In Windo ws XP, click Start
Æ My Computer).
b Double-click the CD-ROM drive icon. If
necessary, double-click setup.exe.
c When the All-In-One software installation
screen appears, click Install.
d Follow the instructions on the screen.
Need more ink?
Symptom Diagnosis Solution
The Power light is
not lit
Is the power cord pushed all the way
into the All-In-One?
Disconnect the power cord from the wall outlet, and then
from the All-In-One. Reconnect the power cord by pushing
it all the way into the con nec tor on the All -In-O n e, a nd the n
into the wall outlet.
Is the All-In-One connected to a
working electrical outlet?
Connect the All-In-One to an electrical outlet that other
electrical devices have been using.
Software will not
install
Is your operating system compatible
with the All-In-One?
The All-In-One supports these operating systems:
• Windows 98, Windows Me, Windows 2000, and
Windows XP
• Mac OS X versions 10.1.5, 10.2.3–10.2.8, and 10.3.0–
10.3.4
The control panel
displays text in the
wrong language
Did you select a language? 1 Press Menu.
2 Press the down arrow button until you reach the last
item.
3 Press the up arrow button twice.
4 Press the right arrow button until the language you want
appears on the display.
5 Press Select.
Note: Press Menu to see the new language displayed.
To order cartridges, visit www.lexmark.com.
You can insert a photo cartridge or a black
cartridge into the left carrier. You can insert a
color cartridge into the right carrier.
Photo cartridge
Black cartridge
Color cartridge
• 31 • 32
• 34
• 33
• 35
Setup troubleshooting
Windows
Macintosh
To prevent errors during
installation:
1 Close all open programs.
2 Temporarily disable any anti-
virus software. For help,
refer to your program
documentation, or contact
the software manufacturer
for support.
Important: After installation is
complete, remember to
re-enable your anti-virus
software.
Have a question?
Loading...