MODEL: L-84
Turntable with USB connection
Quick guide
www.lenco.com
OPERATION
1.What’s in the box, 1Xturntable, 1Xdust cover, 2Xhinge, 1Xbuilt-in RCA
cable, 1Xsingle puck, 1XAC to DC adaptor
2. Select the speed for the record to be played by setting the speed select
button.
3. Place a record on the turntable platter. Place the 45 rpm record adapter
over the turntable shaft when playing a doughnut style record which has a
large diameter center hold.
4. Remove the stylus protector cover and release tonearm clip.
5. Move the cueing lever to the up position, then move tonearm toward the
record. The turntable will start revolving.
6. Position the tonearm above the first groove of the record and move the
cueing lever to the down position, the tonearm will come down gently onto
the record surface automatically.
7. At the end of the record, put the tonearm back to the arm rest and
switch off the power switch on the rear panel.
IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.
This symbol indicates that there are important operating
maintenance instructions in the user manual
accompanying this unit.
This symbol indicates that dangerous voltage is present
within this unit, constituting a risk of electric shock or
personal injury.
CAUTION: TO PREVENT AN ELECTRICAL SHOCK, DO NOT REMOVE
ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM
SERVICING.
2