La Crosse Technology WT-3181PLQ Faqs
WT-3181 PLQ F A Q S
The links below will work in most PDF viewers and link to the topic area by clicking the link.
We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
CONTE NT S
WT-3181PLQ FAQS ............................................................................................................. 1
Batteries ............................................................................................................................. 1
Factory Restart ................................................................................................................ 1
Time is Incorrect ............................................................................................................. 2
Manually Set Time ........................................................................................................... 2
How long will the battery last? .................................................................................. 2
Hands spin non-stop ...................................................................................................... 2
Hands jumps or jerks around the dial ..................................................................... 2
Hands are loose. .............................................................................................................. 2
Position the Clock ........................................................................................................... 2
How do I adjust the Temperature or Humidity? .................................................. 2
BAT TERI E S
Explanation: Many problems are resolved with fresh batteries of the appropriate voltage.
Many items sent in under warranty work when tested with fresh batteries. Batteries
manufactured this year will have an expiration date 10 years (or more) in the future.
Battery technology has improved and batteries will maintain voltage longer in storage.
However, the environment the batteries reside in for the 10 years can deplete the power.
We suggest a name-brand Alkaline battery.
A minimum voltage of 1.48V is necessary for proper performance.
Use a battery dated at least six years in advance of the current year. Batteries dated
earlier than six years from now may still work, but may be unstable in performance.
Good name-brand batteries make less noise, which reduces the chance of RF (radio
frequency) interference from the battery compartment.
FAC TORY REST ART
Explanation: The factory restart returns the atomic clock to an “out-of-the-box” state and
often resolves an issue.
Factory Restart:
1. Remove the battery from the clock for 15 minutes.
2. Insert fresh Alkaline battery into the clock.
3. Manually set the time.
La Crosse Technology, Ltd Page 1
TIME IS INCO R RECT
This clock has manual set time.
Gently spin the time set wheel on the back of the clock to set the time.
MAN UALLY SET TIME
Gently spin the time set wheel on the back of the clock to set the time.
HOW LONG WIL L THE BATTE RY LA ST?
A good AA Alkaline battery will last over 12 months.
HAN DS SP IN N O N-STO P
This is indicative of a low or overpowered battery (number 1 warranty issue).
Replace battery and perform restart procedure.
HAN DS JU MPS OR JE RKS AR OUND THE D IAL
This is indicative of a low or overpowered battery (number 1 warranty issue).
Replace battery and perform the restart procedure. Hands stuck at certain time
HAN DS AR E LO O SE.
If under warranty, the clock must be sent in for repair or the movement needs to be
replaced.
POS ITIO N THE CLOC K
This La Crosse Technology
®
atomic clock is designed for indoor or outdoor use.
INDOOR: Select a location to place the radio-controlled clock where it will be at least
six feet away from a TV, computer, air conditioner or other household electrical
appliances.
OUTDOOR: Select a location sheltered from direct sunlight and rain, preferably under
a roof or porch area.
This clock is designed for indoor and outdoor use: but only in a dry environment and in a
temperature range between -10°F and 131°F.
Note: The clock is NOT waterproof. If left in the elements water may enter the clock and
damage it.
HOW DO I ADJU ST TH E TEM PERAT URE OR HUM IDITY ?
Use a flat tipped screwdriver to gently turn the temperature or humidity sensor screw at
the back of the clock to the desired setting.
La Crosse Technology, Ltd Page 2
Loading...