La Crosse Technology WS9850 User Manual

WIRELESS 868 MHz TEMPERATURE STATION

INTRODUCTION:

Congratulations on purchasing this compact 868MHz Temperature Station which displays time, the indoor and outdoor temperature and the daily outdoor minimum and maximum temperatures. Besides, by the totally 5 different weather icons featured by "Weather man", users can easily observe the current temperature condition. With only two easy to use keys, this product is ideal for use in the home or office.

Instruction Manual

« Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. “IT +” offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time!

FEATURES:

Function

Display

Keys

LCD

Hanging

Hole Battery compartment cover

Stand

The Temperature Station

• Quartz clock in 12 or 24-hour time display (hour and minute, manually set)

• Indoor and outdoor temperature reading in degree Celsius (°C)

or Fahrenheit (°F)

• Can receive up to three outdoor transmitters

• Wireless transmission at 868 MHz

• Display one of the 5 easy-to-read Temperature condition icons featured by

Weather man

• Signal reception intervals at 4 seconds

• Display Minimum and Maximum outdoor temperature in normal display

• Low battery indicator

• Wall mounting or table standing (removable table stand included)

The Outdoor Temperature Transmitter

• Remote transmission of outdoor temperature to

Temperature Station by 868 MHz signals

• Shower proof casing

• Wall mounting and table-standing

SETTING UP:

When one transmitter is to be used

1. First, insert the batteries to the transmitter (see “How to install and replace batteries in the Temperature transmitter” below).

2. Within 30 seconds of powering up the transmitter, insert the batteries to the Temperature Station (see “How to install and replace batteries in the Temperature station” below). Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature, the Weather man icon and the time as 0:00 will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to the next step.

3. After the batteries are inserted, the Temperature Station will start receiving data signal from the transmitter. The outdoor temperature should then be displayed on the Temperature station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good conditions be a distance no more than 100 meters between the final position of the Temperature Station and the transmitter (see notes on “Positioning” and “868 MHz Reception”).

When more than one transmitter is to be used

1. User shall remove all the batteries from the temperature station and transmitters

and wait 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 30 seconds of powering up the first transmitter, insert the batteries to the

Temperature Station. Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature, the Weather man icon and the time as 0:00 will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then be

displayed on the Temperature station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

readings from the first transmitter are displayed on the temperature station.

Note: User shall insert the batteries into the second transmitter within 10 seconds of reception of the first transmitter.

6. The outdoor temperature from the second transmitter and the "channel 2" icon

should then be displayed on the Temperature station. If this does not happen after 2 minute, the batteries will need to be removed from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and

outdoor data are displayed on the temperature station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is successfully received. If this is not happen, user shall restart the setting up from step 1.

Note: User shall insert the batteries into the third transmitter within 10 seconds of reception of the second transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this

should under good conditions be a distance no more than 100 meters between the final position of the Temperature Station and the transmitter (see notes on “Positioning” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional transmitters is not followed as described above. Should transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from step 1.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION

The Temperature Station uses 2 x AA, IEC LR6, 1.5V batteries. When batteries will need to be replaced, the low battery icon will appear on the LCD. To install and replace the batteries, please follow the steps below:

1. Lift up the battery compartment cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The Temperature transmitter uses 2 x AA, IEC LR6, 1.5V batteries. When batteries will need to be replaced, the low battery icon will appear on the LCD of the Temperature Station. To install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery holder to the unit.

+ 27 hidden pages