La Crosse Technology WS-9029U User Manual
WS-9029U
915 MHz
WIRELESS WEATHER STATION
INSTRUCTION MANUAL
CONTENTS
03 introduction
03 features
04 quick set up guide
05 detailed set up guide
06 function keys
06 operations
08 mounting
09 troubleshooting
10 maintenance and care
10 specifications
10 warranty information
2
(
)
(
)
r
(
)
(
)
p
y
This product offers:
INSTANT TRANSMISSION is the state-of-the-art new
wireless transmission technology, exclusively
designed and developed by LA CROSSE
TECHNOLOGY. INSTANT TRANSMISSION offers you
an immediate update (every 4 seconds!) of all your
outdoor data measured from the sensors: follow
your climatic variations in real-time!
12 or 24 Hour
Time Display
Indoor Temperature
Connection
w/ Sensor Icon
Low Battery
Indicator
Set/
Channel Button
Outdoor Temperature
Minimum or Maximum
Tem
Minimum/Maximum/+
FIGURE 1
FEATURES
• Wireless Weather Station (Figure 1).
• Remote Temperature Sensor with optional Channel 2 Probe (TX25U, Figure 2).
• Indoor Temperature (°F or °C) and Indoor Humidity.
• Wireless Outdoor Temperature (°F or °C).
• Optional Channel 2 Temperature Probe.
• Able to Receive up to 3 Remote Temperature Sensors.
°F or °C
Indoor Humidity
%RH
Channel Indicato
1, 2, or 3
°F or °C
erature & Humidit
Button
3
• Wall Hanging or Free Standing.
r
y
Temperature Senso
LCD Temperature Displa
Remote
Optional Probe
w/ 10 Foot Wire
FIGURE 2
Wall-Mounting
Bracket
ADDITIONAL EQUIPMENT (not included)
1. Two fresh AA 1.5V alkaline batteries for the wireless weather station.
2. Two fresh AAA 1.5V alkaline batteries for the remote temperature sensor.
3. One, Philips screwdriver for mounting.
QUICK SETUP
Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries.
1. Have the Wireless Weather Station and Temperature sensor 3 to 5 feet apart.
2. Batteries should be out of both units for 10 minutes.
3. Place the batteries into the Temperature sensor first and next into the Wireless Weather
Station.
4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
In this time the Wireless Weather Station and the temperature sensor will begin to communicate with
each other, and the display will show both the indoor temperature and an outdoor temperature. If the
Wireless Weather Station does not display both temperatures after the 15 minutes, please retry the
set up as stated above. After both indoor and outdoor temperatures are displayed for 15 minutes you
can place your temperature sensor outdoors, and set your time.
The temperature sensor should be placed in a dry, shaded area (ex: under the eve of a roof). The
temperature sensor has a range of 330 feet. Any walls that the signal will have to pass through will
reduce distance. An outdoor wall or window will have up to 20 feet of resistance and an interior wall
will have up to 10 feet of resistance. Your distance plus resistance should not exceed 330 feet in a
straight line.
NOTE: Fog and mist will not harm your temperature sensor, but direct rain must be avoided.
4
Loading...