Lab Gruppen LUCIA 240/2 Data Sheet

LUCIA Optional Accessories

Optional Accessories

LUCIA: Localized Utility Compact Intelligent Amplification

A range of optional accessories enhances the utility and cost­effectiveness of LUCIA compact installation amplifiers. Flexible
mounting options allow placement of LUCIA amplifiers either
in equipment racks or adjacent to video screens, fixed either on
screen support poles or ceiling structural elements. In addition, the
purpose-built remote control units (both standalone potentiometer
‘DIY kits’ and self-contained complete units**) allow remote volume
control and source selection without the complexity of integrating,
third-party control systems.

Each accessory is ordered separately according to the listed part
number.

** complete wall panel control unit available within EU only

Benets

• Extends the utility and flexibility of LUCIA

• Three placement/mounting options

• Simplifies system design - No third party controller
required

• Designed to make LUCIA extremely contractor-friendly

• Supplied and suppor ted by Lab.gruppen

Pole Mount Kit

Block

Connector

Detachable

screw

terminal

block

White
Knob

Level control and Selector

with white knob

WWW.LABGR U PPEN.COM

Rack Mount Kit

Complete remote
wall panel control

LUCIA Optional Accessories

A

A

B

B

Pole Mount Kit

Part Number: 990692001

The Pole/Ceiling Mount Kit facilitates fast and secure fixing of a
LUCIA unit to poles, beams and ceiling structures of various shapes
and dimensions (circular, rectangular, oval, quadratic). Options might
include a free -standing pole for a loudspeaker or video screen,
a projector ceiling mount, or a cable tray. Included screws allow
attachment to circular poles with a diameter from 19 mm (3/4”) to
51 mm (2”).

Optional Accessories

LUCIA: Localized Utility Compact Intelligent Amplification

Installation of Pole Mount - Method 1 Installation of Pole Mount - Method 2

A

A

A

B

B

A: Use M4X5.5 mm screw supplied with product accessories

B: Use M5X45 mm screw supplied with product accessories

or

B: Use M5X30 mm screw supplied with product accessories

A

B

B

WWW.LABGR U PPEN.COM

8,80

LUCIA Optional Accessories

Pole Mount Kit

Apparatus on the opposite side of the pole/beam

Optional Accessories

LUCIA: Localized Utility Compact Intelligent Amplification

6436,78

C

L

0

7,59

36,78

19,75

11,28

R10,50

C

L

R4,25

Apparatus attached to LUCIA

R10,50

36,06

64

100,78

(x2)6,50

R10,50

122,25

131,50

142

134,09

20 (x4)

punch direct

L

142

35

9

0°

35

punch direct

16

18

C

2

42

C

L

C

122,50

126,50 ±0,10

102,50 ±0,10

C

2,50

28

R5

L

R5

R5

M5 PEM SS-M5 -2 (x2)

28

R5

WWW.LABGR U PPEN.COM

L

142

9

9

37

35

LUCIA Optional Accessories

A

A

A

Rack Mount Kit

Part Number: 990692002

The Rack Mount Kit enables mounting of one or two LUCIA amplifier
units in 1U of a standard 19” equipment rack. Mounting is quickly
accomplished by removal of the front faceplate of the LUCIA unit(s)
and reinstalling with the included M3 x 10mm machine screws. It is
permissib le to mount LUCIA units or oth er equipment directly ab ove or
below rack-mounted LUCIA units; however, allowing 1U space above
or below will allow higher power output in silent or whisper mode.

Optional Accessories

LUCIA: Localized Utility Compact Intelligent Amplification

Possible extra LUCIA

A

Assembly Instructions

1. Remove the two TORX screws holding the decorative outer rim
of the front plate.

2. Place the amplifier on top of the rack mount according to the
drawing opposite.

3. Replace the decorative outer rim of the front plate in front of the
rack part.

4. Reassemble the front, rack mount and amplifier by use of two
of the M3 x 10 mm length machine screws (A) supplied as
accessories with the LUCIA amplifier.

5. In the side of the rack mount, fix t he third of the M3 x 10 mm length
machine screws (A) supplied as acceossories with the LUCIA
amplifier.

6. If two amplifiers are placed on the rack mount - please repeat
assembly instructions 1 to 5 for the other amplifier.

Attention

Do not use the rack mount for other equipment, as this could
overload the mount and make it unsafe. It is recommended to leave

A

A

a one unit high rack space empty - either above or below the LUCIA
amplifier rack.

WWW.LABGR U PPEN.COM

LUCIA Optional Accessories

R7,62

Rack Mount Kit

442,54

482,50

30,10

6,25

15,05

39,50

22,50

5,50

B

193,04

44

0

6,25

Optional Accessories

LUCIA: Localized Utility Compact Intelligent Amplification

193,04

181,34181,34

43,50
39,25

27,07

12,70

5,50

0

126

122,65

105,94

BOTH SIDES

R2,20

90,89

91,89

R4,75 (x2)

11,69

16,44

1,50

0

6,10

31,80

5,10

205,27

141,29

109,29

(x 10)

11,77

11,77

11,65

81,85

113,85

205,27

221,27

126

109,67

95,33

80,99

66,65

52,32

21,30

0

0

DETAIL B

BOTH SIDES

8,80

1

R5,20

R7,62

7

4,50 (x4)

WWW.LABGR U PPEN.COM

LUCIA: Localized Utility Compact Intelligent Amplification

LUCIA Optional Accessories

Level control with white knob for DIY

Part Number: 990692005

Optional Accessories

Maximum panel thickness

2.5 mm

The Remote Volume Control Kit is an easy-to -install, bespoke solution
for controlling the volume of LUCIA amplifier from a remote location.
The kit contains a circuit board, a connector with screw terminals,
a continuously variable level control, and a white knob (replaceable
with other standard knobs. Installation is accommodated with any
wall plate or panel with a maximum thickness of 2.5 mm and circular
opening of 9 mm diameter.

Note: Please refer to the LUCIA Operation Manual for information on
configuring the unit for remote level control.

PCB

White

Knob

Block

Connector

Detachable

screw

terminal

block

3 cables

(not supplied)

Selector with white knob for DIY (for LUCIA M models only)

Part Number: 990692006

The Remote Source Selector kit enables switching and routing of
inputs/outputs of LUCIA M models according to presets configured
in the LUCIA Application Browser. The kit includes a resistor ladder
and four-position selector switch to access the programmed
functions. Installation is accommodated with any wall plate or panel
with a maximum thickness of 2.5 mm and circular opening of 9 mm
diameter. It is mechanically identical to 990692005.

Note: Please refer to the LUCIA Operation Manual for information on
configuring the unit for remote switching.

WWW.LABGR U PPEN.COM

LUCIA: Localized Utility Compact Intelligent Amplification

LUCIA® Optional Accessories

Complete remote wall panel control

Part Number: 990692004

This is functionally the same as the 99 06 920 05, but complete with
a white panel. The screw holes are 60 mm apart, matching the EU
standard for back boxes. It can be mounted in any in- or on-wall
back box provided the screw holes are 60 mm apart. It can also
be mounted in many of the cable canals that are typically found in
corporate environments. The panel requires simple pre-assembly by
the installer, during which a label can be located behind a protective
plastic film, allowing for customized text (eg. function, etc) to be
shown through the oval window in the panel.

Optional Accessories

22,50

42,50

50,50

85

25

30

0

A

0

30

25

SECTION A-A

R2 (x4)

R9

19

3 cables

(not supplied)

Block

Connector

Detachable

screw

terminal

block

PCB

A

85

WWW.LABGR U PPEN.COM

Item no. LUCIAACCESSORIES-V2 - 02.12.2015