Karcher K5.93M User Manual

K 5.93 M

English
5.962-170.0 12/06
2
HIGH PRESSURE WASHER OPERATOR MANUAL
MODEL OVERVIEW 4 IMPORTANT SAFETY
INSTRUCTIONS ASSEMBLY INSTRUCTIONS 7 OPERATING INSTRUCTIONS 8 - 9 USING THE ACCESSORIES 9 WORKING WITH DETERGENTS 10 - 11 TAKING A BREAK 11 SHUTTING DOWN & CLEAN-UP 12 WINTERIZING AND LONG-
TERM STORAGE CARE AND MAINTENANCE
INSTRUCTIONS CLEANING TIPS 14 - 15 OPTIONAL CLEANING
ACCESSORIES TROUBLESHOOTING 18 - 19
5 - 6
13
13
16 - 17
Specifications
Max. Pressure 1850 PSI Water volume 1.5 GPM Amp draw 13 AMPS Voltage 120 V Part No. 1.630-203.0 Serial no.
Kärcher Customer Support USA
Call: 1-800-537-4129 for help or visit our website:
Please take a moment to register your pressure washer online at
www.karcher-usa.com/warranty
Kärcher Customer Service CDN
Call: 1-800-537-4129 for help or visit our website:
www.karcher-canada.com
Kärcher Customer Support
Mexico
Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx
Safety Alert Symbols
DANGER
indicates “an imminently hazardous sit­uation which, if not avoided, will result in death or serious injury.
WARNING
indicates “a potentially hazardous situa­tion which, if not avoided, could result in death or injury.”
CAUTION
indicates “a potentially hazardous situa­tion which, if not avoided, may result in minor or moderate injury or in property damage incidents.”
Owner/User Responsibility
The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings be­fore using this pressure washer. Warning information should be empha­sized and understood. If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, mak­ing sure that the operator comprehends its contents. Owner and/or user must study and maintain for future reference the manu­facturers’ instructions.
English 3
MODEL OVERVIEW
1 Power cord with Ground Fault Circuit
Interrupter (GFCI) 2 Trigger gun 3 Trigger gun safety lock 4 High pressure hose 5 Water inlet with garden hose con-
nector (not shown) 6 Transport handle 7 Accessory storage 8 Detergent tank (removeable) 9 Detergent metering regulator 10 High pressure outlet
11 ON/OFF switch 12 Vario Power Spray wand 13 Dirtblaster® (Rotating spray wand)
CAUTION
This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergents may affect the op­eration of the machine and void the war­ranty.
For household use only!
4 English
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
When using this product basic precautions should always be
followed, including the following:
Read all the instructions before us-
ing the product.
To reduce the risk of injury, close su-
pervision is necessary when a prod­uct is used near children.
Know how to stop the product and
bleed pressures quickly. Be thor­oughly familiar with the controls.
Stay alert – watch what you are do-
ing.
Do not operate the product when fa-
tigued or under the influence of alco ­hol or drugs.
Keep operating area clear of all per-
sons.
Do not overreach or stand on unsta-
ble support. Keep good footing and balance at all times.
Follow the maintenance instructions
specified in the manual.
This Product Is Provided With A
Ground Fault Circuit Interrupter Built Into The Power Cord Plug. If Re­placement Of The Plug Or Cord Is Needed, Use Only Identical Re­placement Parts.
Risk of Injection or Injury – Do Not
Direct Discharge Stream At Per­sons.
High pressure jets can be dangerou s
if misused. The jet must not be di­rected at persons, animals, electrical devices, or the machine itself.
Wear safety goggles.Do not use acids and solvents in this
product. These products can cause
physical injuries to the operator and irreversible damage to the machine.
To reduce the risk of electrocution,
keep all connections dry and off the ground. Do not touch plug with wet hands.
The Trigger Gun Safety Lock PRE-
VENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the ON position.
Do not use extension cord with this
unit.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resis­tance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equip­ment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in ac­cordance with all local codes and ordi­nances.
DANGER
Improper connection of the equipment­grounding conductor can result in a risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet in­stalled by a qualified electrician. Do not use any type of adapter with this prod­uct.
English 5
GROUND FAULT CIRCUIT IN-
TERRUPTER PROTECTION
This product is supplied with a Ground Fault Circuit Interrupter (GFCI) built into the power cord plug. This device pro­vides additional protection from the risk of electric shock. If power is interrupted in the line, the GFCI will automatically re-close the circuit to the load after pow­er is restored. Depending on the GFCI model, it may be necessary to manually operate the reset button to restore pow­er to the GFCI load circuit. If replace­ment of the plug or cord is needed use identical replacement parts.
WATER SUPPLY
(Cold Water Only)
CAUTION
When connecting the water inlet to the water supply mains, local regulations of your water company must be observed. In some areas the unit must not be con­nected directly to the public drinking wa­ter supply. This is to ensure that there is no feedback of chemicals into the water supply. Direct connection via a receiver tank or backflow preventer, for example, is permitted. Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter.
Garden hose must be at least 5/8
inch in diameter.
Flow rate of water supply must not
fall below 2 GPM (gallons per
minute).
Flow rate can be determined by run-
ning the water for one minute into an
empty 5-gallon container.
The water supply temperature must
not exceed 104°F/40°C.
Never use the pressure washer to
draw in water contaminated with sol­vents, e.g. paint thinners, gasoline, oil, etc.
Always prevent debris from being
drawn into the unit by using a clean water source.
SAVE THESE INSTRUCTIONS!!
6 English
Loading...
+ 13 hidden pages