Kyocera TASKalfa 250, TASKalfa300, TASKalfa400, TASKalfa500ci SERVICEBULLETINS 2H7 024

Service Bulletin

SB Number:

SB 2H7-024

The parts MFP drive has been changed to make the parts

Subject:

common with other models

Model: TASKalfa400ci/500ci

Contents of changes

The parts MFP drive has been changed as follows, to make the parts common with other models:

1. The bushing 6 3CY07080 has been changed to bearing drive 68822330.

2. Due to the above mentioned change, the hole (Y) at the holder MFP drive 302H731831 has been changed from oval to round shape with projection.

3. The bush screw 302H702590 has been changed to bearing drive 68822330.

4. Due to the above mentioned change, the hole (X) at the plate MFP drive 302H731821 has been changed from oval to round shape.

5. According to the above mentioned changes, the bush screw 302H702590 (6mm thickness) has been changed to bearing drive 68822330 (3mm thickness).

6. To close the gap between the gear Z21R BRS 302H731870 and the shaft BRD drive 302KY31080, the cut washer 2BG22990 has been added.

Creation Date: 19/11/2009

Parts No. Old Parts

No.

1 302H731820

2H731820

2 302H731830

2H731830

3 302H731901

2H731901

4 ------------ 2BG22990 CUT WASHER 4 - 1 - X -

5 ------------ 68822330 BEARING,DRIVE - 2 - X -

6 302H702590

2H702590

7 3CY07080 3CY07080 BUSHING 6 3 2 O - -

Classication

Field measure Please do not mix old with new parts, when replacing the parts at the parts MFP drive.

Entire stock rework

New Parts No.

302H731821 2H731821

302H731831 2H731831

302KY31080 2KY31080

302H702590 2H702590

In-eld modication at next visit

Description Q’TY Interchange-

PLATE MPF DRIVE 1 1 X X -

HOLDER MPF DRIVE 1 1 X X -

SHAFT BRS DRIVE 1 1 X X -

BUSH SCREW 3 2 O - -

Old New Old New

In-eld modication by case

ability

No modication necessary

Serial numbers of affected machines

Type Serial number

TASKalfa400ci/500ci Not available

KMIS Service Department, Kyocera Mita Europe 9062 / SB 2H7-024

Page 1 of 2

Service Bulletin

Old condition: Parts MFP drive 302H793110

Gear Z18S BRS 302H732090

Shaft BRS drive 302H731901

Bushing 6 3CY07080

Gear Z21R BRS 302H731870

Holder MFP drive 302H731830

Bush screw 302H702590

Plate MFP drive 302H731820

New condition: Parts MFP drive 302H793110

Plate MFP drive 302H731821

Shaft BRS drive 302KY31080

Bearing drive 68822330

Cut washer 4 2BG22990

Holder MFP drive 302H731831

Bearing drive 68822330

New conditon: Cross section view of the shaft BRS

drive, gear Z21R BRS, cut washer 4 and the bearing drive after assembly.

Gear Z21R BRS 302H731870

Shaft BRS drive 302KY31080

Cut washer 4 2BG22990

Bearing drive 68822330

KMIS Service Department, Kyocera Mita Europe 9062 / SB 2H7-024

Page 2 of 2