Kyocera TASKalfa 250, TASKalfa300, TASKalfa400, TASKalfa500ci SERVICEBULLETINS COM 0209 A388 2
Q’
Com
bi
p
ati-
*3 & *4:25x30 mm
New: thickness is 5
mm.
Service Bulletin Ref. No.
(Revised Issue 2)
COM-0209 (A388)
<Date> May 12, 2011
Subject Prevention of Coming off of the DP Original Plate
(Page.1/2)
Model
This time, the description with (-->) was revised from the previous information.
(Installation target models of DP-700 : KM-3050/4050/5050
DP-700, DP-710, DP-750/DP-750(B), DP-760/DP-760(B)
(P2) The Affected Serial Numbers were added.
DP-710 : KM-C2520/C3225/C3232/C2525E/C3225E/C3232E/C4035E
DP-750/DP-760 : TASKalfa500ci/400ci/300ci/250ci
DP-750(B)/DP-760(B): TASKalfa500ci/400ci/300ci/250ci, TASKalfa552ci, TASKalfa420i/520i)
Topic
The sponge used for the original plate may deteriorate by hydrolysis. If the sponge peels off, or the original plate
may also come off since the sponge cannot keep it any more.
Therefore, the material of the sponge was changed as follows.
Content of Changes
Material: (Old) SM-55 (Esters) --> (New) F-2G (Ethers)
DP-700
No.2
Original plate
Old Part
No.
1
2
3
4
* Please replace all parts of No.1-4 with the new ones when replacing the parts.
*1: DP-700
*2: DP-710: 3 pcs. used; DP-750/DP-750(B):1 pc. used; DP-760/DP-760(B): 1 pc. used
*3: DP-710
*4: Please do not apply the old and new sponge together since the thickness of the old and the new sponge is different.
No.
303JX02330
3JX02330
303JX02420
3JX02420
303J902090
3J902090
303J902100
3J902100
New Part
No.
303JX02331
3JX02331
303JX02421
3JX02421
303J902091
3J902091
303K502080
3K502080
DP-750/DP-750(B)
DP-710
No.3
No.1
DP-760/DP-760(B)
(-->)
No.3
No.4
Original plate
Description
Old New Old New
SPONGE ORIGINAL MAT 2 2 X X
SPONGE ORIGINAL MAT B 2 2 X X
SPONGE ORIGINAL MAT A (*2) (*2) X X
SPONGE ORIGINAL MAT 3 3 X X
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
Original plate
ty
lity
Remarks
*1: 26x36 mm
(The thickness is 7 mm.)
*1: 26x36 mm
(The thickness is 2 mm.)
*2: 13x22 mm
(The thickness is 3mm.)
Old: thickness is 3 mm.
KMA KME/KMAO
KMJ KTST
KMKR
KMTW
UTAX O
livetti
P
roduction
Prd
P
roduction
Service Bulletin Ref. No.
(Revised Issue 2)
<Date> May 12, 2011
(Page.2/2)
COM-0209 (A388)
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please replace all sponges with the new ones when the phenomenon described above
occurs.
(-->)
Serial Nos. of the Affected Machines
DP-750(B)
1203LL6KL1 1203LL5KL1 1203LL5JP1 1203LL5KS2 1203LL5KR0 1203LL5TW0 1203LL5UT1 1203LL5LV0
QHB1125908 QHA1156099 QGZ1125137 QMQ1101549 QHA Next Prd Q821100420 QET1116906 Q1P1101281
Others
Next
DP-760(B)
KMA KME/KMAO KMJ KTST KMKR KMTW UTAX Olivetti
1203LK6KL1 1203LK5KL1 1203LK5JP1 1203LK5KS2 1203LK5KR0 1203LK5TW0 1203LK5UT1 1203LK5LV0
QGY1277581 QGX1108633 QGW1102003 QMR1200345
Others
Next
Other models: Currently no production
QGX Next
Q831100021 QEU1101281 Q1Q1100582
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Loading...