Kyocera TASKalfa 250, TASKalfa300, TASKalfa400, TASKalfa500ci SERVICEBULLETINS COM 0252 B422

Service Bulletin Ref. No.

Subject

(Page.1/2)

COM-0252 (B422)

<Date> December 2, 2011

Notes on Replacement of the Parts (Change of the Lift-up Motor)

Model

(Installation target models of PF-760: TASKalfa500ci/400ci/300ci/250ci PF-760(B): TASKalfa500ci/400ci/300ci/250ci, TASKalfa420i/520i

PF-750: KM-C2525/C3225/C3232/C2525E/C3225E/C3232E/C4035E, FS-C8100DN, EP

PF-75: KM-2530/3530/4030, FS-9100DN, FS-9500DN, KM-3035/4035/5035, FS-9120DN,

PF-760/PF-760(B), PF-750, PF-75

C320DN,KM-3050/4050/5050, FS-9130DN, FS-9530DN, EP 510DN,

FS-9520DN)

Topic

The lift-up motor was changed due to discontinuation of the production of this part. Additionally, the service parts kit (No.1) was newly set up in order to secure the compatibility of the parts. Please refer to [Field Measure] since some attention is required due to this change.

[Change of the lift-up motor (machine rear side)]

(Old)

[Items bundled in the service parts kit (No.1)]

Lift-up motor (1pc.)

Motor bracket (1pc.)

(New)

Screw (3x6IT) (3 pcs.)

Screw (3x8W) (2 pcs.)

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

Q’

Com

ati-

Service Bulletin Ref. No.

(Page.2/2)

COM-0252 (B422)

<Date> December 2, 2011

No.

Old Part

No.

1 ----------

2 ----------

3 ----------

4 ----------

305FH27011

5FH27011

305H080600

5H080600

New Part

No.

305H894010

5H894010

305H880090

5H880090

305H880110

5H880110

305H880120

5H880120

---------- MOTOR,LIFT 2 -

---------- SCR-030-250WWS 4 -

ASSY,LIFT-UP-MOTOR - 2

+MA-D00-002 - 1

+SCR-030-060WIT - 3

+SCR030080FWWS - 2

Description

Old New Old New

lity

- O

- X

X -

Remarks

Service parts kit *1

Changed to No.1

“+” at the head of the part name indicates that it is a component part.

*1: Bundled items in the service parts kit Lift-up Motor (No.2), Motor Bracket (1pc.), Screw (3x6IT)(No.3), Screw (3x8W)(No.4) and leaflet

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure:

Please use the service parts kit (No.1) when replacing the parts. Attach the lift-up motor by applying 2 pieces of the 3x8W screw (No.4) after attaching the motor bracket by applying 3 pieces of the 3x6IT screw (No.3). (*Do not use the 3x25mm screw (No.6) for the old type motor.) Two of the motors may be used in combination of the old type motor with the old type screws or the new type motor with the new type screws. (Please refer to the leaflet bundled in the service parts kit (No.1) for the motor replacement procedures.) Serial Nos. of the Affected Machines: After using up the old stock

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.