Kyocera TASKalfa 250, TASKalfa300, TASKalfa400, TASKalfa500ci SERVICEBULLETINS COM 0297 D177

(Page.1/2)

Subject

Dustproof Countermeasures for the ISU When Installing the
Original Cover (Platen)

Model l:

PLATEN COVER TYPE(E)

PLATEN COVER
TYPE(E)

TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5501i/4501i/3501i,
TASKalfa 5500i/4500i/3500i, TASKalfa 500ci/400ci/300ci/250ci, TASKalfa 552ci, TASKalfa 520i/420i,
TASKalfa 300i, TASKalfa 180/220/181/221

KDC's Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measures:

Please cover the hole as indicated in [Alignment of the dust proof label] below and affix the label (No.6)
after cleaning with alcohol when installing the PLATEN COVER TYPE (E) (No.1 to No.5).

Serial Nos. of the Affected Machines:
Please distinguish the old and the new original covers (No.1 to No.5) as described in [Distinction of old and
new original covers (No.1 to No.5)] below.

Service Bulletin Ref. No. COM-0297 (D177)

<Date> August 23, 2013

Affected models:

Topic

Dust or foreign objects might enter in the ISU through the DP mounting holes and image failures of streaks, light
density, etc. might occur when the original cover (platen) is installed. Therefore, the dust proof label (No.6) is now
bundled. Additionally, the leaflet is bundled which describes the alignment of the dust proof label (No.6).

KYOCERA Document Solutions Europe

Customer Services & Support Division (CSSD)

(Page.2/2)

No.

Old Part

No.

New Part

No.

Description

Q

ty.

Com

bi

pati­lity

Remarks

Old

New

Old

New

Original mat (Product)

1

1202H70UN0

022H70UN

1202H70UN0

022H70UN

PLATEN COVER TYPE(E)

1

1

-

-

Other than No.2 &
No.3

2

1202H70NL0

022H70NL

1202H70NL0

022H70NL

PLATEN COVER TYPE(E)

1

1

-

-

Algerian specs.

3

1202H70RY0

022H70RY

1202H70RY0

022H70RY

PLATEN COVER TYPE(E)(RY)

1

1

-

-

Saudi Arabian specs.

Common item bundled in No.1-5

4

----------

303PH34070

3PH34070

+ LABEL ISU REAR

-

1

-

O

Set of two labels

Original cover (Platen)

[Distinction of old and new original covers (No.1 to No.5)]

(Master case)

(Individual case)

[Dust proof label (No.6)]

35 mm

Two labels of same
size

Thickness: 0.065 ±0.02 mm
Color: Blackish blue

35 mm

Affix the dust proof label (No.6) to
cover the hole.

0 mm

1mm

mark on the barcode label is changed to
( mark is for distinction for the curve of the original mat*.)
* Please refer to the service bulletin SB-COM-0286-D087.

Service Bulletin Ref. No. COM-0297 (D177)

<Date> August 23, 2013

[Alignment of the dust proof label]

"+" mark at the beginning of the part name indicates that it is a component part.

KYOCERA Document Solutions Europe

Customer Services & Support Division (CSSD)