Kyocera TASKalfa 250, TASKalfa300, TASKalfa400, TASKalfa500ci SERVICEBULLETINS 2H7 0090 C054

MAIN

2H7_2F00

- - - -

011.006

012.012

C06001_005002

DP-750/750B, 760/760B

3LK_9500

009.003

<--- <

--- <

---

Service Bulletin Ref. No.

(Page.1/3)

2H7-0090 (C054)

<Date> March 15, 2012

Subject

Model

Firmware Upgrade (Upgrade Pack MAIN V13.00)

TASKalfa_250_300_400_500ci_13.00.0010_(2012-01-23)

TASKalfa 500ci, TASKalfa 400ci, TASKalfa 300ci, TASKalfa 250ci

Topic

The firmware was upgraded as follows.

Content of Changes

2012/2 Type Pack Version

MAIN FRAME Fixed code - - - - V11.00 V12.00 V13.00 Remark

MMI *1 2H7_7000 - - - - 011.002 012.012 013.006 LANGUAGE BR (Optional) 2H7_81BR 001.021 <--- 001.029 001.030 BROWSER 2H7_F000 001.015 <--- 001.016 <--- ENGINE (high) ENGINE (low) SCANNER 2H7_1200 005.002 <--- <--- <--- MOTOR MAIN 2H7_1400 003.003 <--- <--- <--- H VLT MAIN 2H7_1600 001.014 <--- <--- <--- SLEEP MAIN 2H7_1800 002.001 <--- <--- <--- FAX BOOT FAX APL FAX IPL FAX BOOT FAX APL Fax System(Q)/(S)C MIX *4 SOLUTION (DBA) J00_E000 005.001 <--- <--- <---

*2, *3

For more details, please refer to the next pages.

2H7_1000 - - - - 021.001 023.001 <---

2JZ_1000 - - - - 021.001 023.001 <---

Fax Sys(Q) 3MB_5000 001.016 <--- <--- <--- Fax Sys(Q) 3MB_5100 (005.002) <--- <--- <--- Fax Sys(Q) 3MB_5200 001.016 <--- <--- <--- Fax Sys(S)C 5JP_5000 001.022 <--- <--- <--- Fax Sys(S)C 5JP_5100 (C08.002

SaturnFAX_Pack

)

<--- <--- <--<--- <--- <---

New

upgrade

013.006

ENHANCEMENT Fixed code V1.12 <--- V1.13 <---

PF-720/720B (2 cassettes) 3LM_9000 004.001 <--- <--- <--PF-760/760B (3000) 5H8_9000 003.002 <--- <--- <--- DF-780/780B (1000) 5JA_9200 007.005 <--- <--- <--DF-760/760B (3000) MAIN 3LT_9200 007.001 <--- <--- <--DF-760/760B (3000) MIDDLE 3LT_9600 008.001 <--- <--- <--MT-720/720B (3000)MAIL BOX 3LW_9800 004.002 <--- 005.001 <---

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net. When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware (PACK of MAIN FRAME/ENHANCEMENT) to the latest version at the same time. *1) Please make sure to upgrade the MAIN and MMI firmware at the same time. If the firmware was individually upgraded, the

CF000 error may occur, which cannot be recovered at the customer site.

*2) Please note that the default value of U327 (Setting Cassette Heater Control) will be reset to OFF, in case that the firmware

is upgraded to the version 004.001 or later from the older version. For more details, please refer to the Service Bulletin SB2H7-0012-8746.

*3) Please perform AC Calibration in the maintenance mode U464 (Set ID Adjustment Mode) after the firmware was upgraded

to the version 006.009 or later from the older version.

*4) Combined firmware of five kinds of FAX firmware (*4). W hen downloading the combined firmware, the appropriate firmware

will be automatically installed by detecting the FAX system (Q) or (S)C.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

at the

authentication.

Therefore, this wa

s corrected.

TO-11-045,

TP-11-118,

corrected.

Therefore, this

s corrected.

Service Bulletin Ref. No.

(Page.2/3)

2H7-0090 (C054)

<Date> March 15, 2012

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure:

Please actively upgrade the firmware on your visit to the user. In this case, please upgrade all kinds of the firmware at the same time. Serial Nos. of the Affected Machines: Planned from the February 2012* production

*The above is the plan at the present moment. Please note that this information is subject to change.

Latest Version

Optional Language KR 2H7_81KR.001.023 For KMKR  New upgrade

Optional Language TW 2H7_81TW.001.022 For KMTW  New upgrade

Optional Language CN 2H7_81CN.001.022 For KMCHN  New upgrade

Content of Changes

No. Changes and Implementations Remarks

1 Support of the file attachment to

the maintenance mail during sleep

The file could not be attached to the maintenance mail during sleep mode. Therefore, this was corrected.

mode

Implementation of the auto image rotation at the manual copy in the System Menu

<For more details, please refer to

Since [Auto image rotation] might result in unintended output, the new setting was implemented to enable switching of the rotation mode for manual copy. [Change] The rotation option was implemented to [Copy] of the System Menu.

the next page.>

3 Support of FAX transmission

extensible authentication

The sender information was not printed on the recipient’s output data when sending FAX if the Job Account setting was ON. However, the Job Account name was not defined at the extensible

CTL No.

KME1107282578147

4 Measures against the login failure

with the HyPAS extensible authentication application

5 Measures against the barcode

print failure

6 Measures against the font printing

failure

7 Measures against the KPDL error

8 Measures against the error when

printing a certain PS data

9 Measures against the form overlay

failure

10 Measures against the B/W data

output failure

11 Measures against the error when

printing a certain XPS file

European Service & Development Center (ESDC)

“Please wait” might appear after logging in the HyPAS extensible authentication application. Therefore, this was corrected.

The content of print job partially was printed beyond the printable area and dropped out when printing a certain file with the KYOmulticode (Barcode Flash). Therefore, this was corrected.

----------------------

The PS error occurred when a certain PDF file was directly printed. Therefore, this was corrected.

The “offending error” occurred and the job was not completely printed when printing a certain PS data. Therefore, this was

If the form overlay was inserted in the prolog/epilog of the KX driver, letters on the second page and after were partially rotated.

The data intended to print in B/W might be printed in color when using a macro. Therefore, this was corrected.

”XPS PRINTE ERROR” occurred when printing a certain file via the XPS driver. Therefore, this was corrected.

KYOCERA MITA Europe B.V.

TO-11-044, KME1107281572255

KMAUS11S07 610664

TP-11-120, #1271661 616686

TP-11-127, NP-Z11035 620059 TP-11-115, #1266578 564755

TP-11-142 NP-Z11039 612624

TP-11-123, UT-S11- 020 614055

TP-11-139, KMAUS11S09 604530

+ 1 hidden pages