Kyocera PF-60 OPTIONS

Updated version 02/06/04: more info + P/N added.

1 / 2

SB Number:

SB PFP-003 Creation Date: 28/04/2004

Service Bulletin

Subject: Usage of PF-60 on FS-1920/3820/3830 (C0560 / 0570 / 0580)
Model:

PF-60 = Paper feeder for FS-1800(+), FS-1900, FS-1920, FS-3800, FS-3820N, FS-3830N, FS-C5016N

Phenomenon & Cause

C0560 (top feeder error), C0570 (middle feeder error) or C0580 (bottom feeder error) may be displayed.
Depending on the PF-60 serial number, the PF-60 will not work if it is installed to a FS-1920, FS-3820(N) or
FS-3830(N).

Field Recommendation

Please avoid installing a PF-60 with an earlier serial number
3830!

Measure

The firmware chip on the PWB control board for the PF-60 has been changed from PF60V0100 to
PF60V0200. If PF-60 is installed to a FS-1920/3820/3830 and C0560 / 0570 or C0580 arises, it is required to
replace the existing PF-60 PWB control board to the new V0200 type.

Distinction between old and new PWB Control board:

On the new type PWB board, the indication V0200 is mentioned on the CPU. (on old type, V0100 is
mentioned.) (Also, when printing Service Status page with PF-60 with new firmware installed, ‘0200’ is

mentioned as indicated in figs. below.)

KMIS Service Team, Kyocera Mita Europe 6418 / SB PFP-003

Top feeder Middle feeder

PF-60

than mentioned below to a FS-1920, FS-3820 /

Bottom feeder

No.

1

Part No.

OLD

5SNSP0013707

(3DD01010)

Affected Machine Serial Numbers:

PF-60: GGD3X42096 and later

Part No.

NEW

303DD01011

(3DD01011)

Updated version 02/06/04: more info + P/N added.

Service Bulletin

Description

PWB CONTROL 1 1 x O

Q’ty

old-new

Interchange

ability

2 / 2

KMIS Service Team, Kyocera Mita Europe 6418 / SB PFP-003