Kyocera KWC-K3801, KWC-K3802 Manual

0 (0)





User Guide			1

E1100 User Guide

This manual is based on the production version of the Kyocera E1100 phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents:

4,901,307	5,109,390	5,267,262	5,416,797
5,506,865
5,544,196	5,657,420	5,101,501	5,267,261
5,414,796
5,504,773	5,535,239	5,600,754	5,778,338
5,228,054
5,337,338	5,710,784	5,056,109	5,568,483
5,659,569
5,490,165	5,511,073

The Kyocera Wireless Corp. (“KWC”) products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law.

Furthermore, the purchase of the KWC products shall not be deemed to grant—either directly or by implication, estoppel, or otherwise—any license under the copyrights, patents, or patent applications of KWC or any third party software provider, except for the normal, non-exclusive royalty-free license to use that arises by operation of law in the sale of a product.

Kyocera is a registered trademark of Kyocera Corporation. Brick Attack and Race 21 are trademarks of Kyocera Wireless Corp. QUALCOMM is a registered trademark of QUALCOMM Incorporated.

Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. TransFlash is a trademark of SanDisk Corporation. Bluetooth trademarks are owned by Bluetooth SIG, Inc. and used by Kyocera Wireless Corp. under license.

All other trademarks are the property of their respective owners.

82-N0247-1EN, Rev. 001-DRAFT

FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved accessory designed for this product. Using accessories that are not supplied or approved by KWC may violate FCC RF exposure guidelines.

Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 15 mm separation distance including the antenna and the user’s body.

THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured to not exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.*

Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified by the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.

Body-worn measurements differ among phone models, depending upon availability of accessories and FCC requirements. While there may be

differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section www.fcc.gov/oet/ea after searching on the FCC ID: OVFKWC-K3801 (dual band) or OVFKWC-K3802 (tri-band).

Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at www.wow-com.com.

* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Bluetooth® Certification

For information about E1100 Bluetooth Certification, visit the Bluetooth Qualification Program Web site at qualweb.bluetooth.org.

Caution

The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operate the equipment.

Optimize your phone’s performance

Use the guidelines in this user guide to learn how to optimize the performance and life of your phone and battery.

Air Bags

If you have an air bag, DO NOT place installed or portable phone equipment or other objects over the air bag or in the air bag deployment area. If

User Guide

equipment is not properly installed, you and your passengers risk serious injury.

Medical devices

Pacemakers—Warning to pacemaker wearers: Wireless phones, when in the ‘on’ position, have been shown to interfere with pacemakers. The phone should be kept at least six (6) inches away from the pacemaker to reduce risk.

The Health Industry Manufacturers Association and the wireless technology research community recommend that you follow these guidelines to minimize the potential for interference.

•Always keep the phone at least six inches (15 centimeters) away from your pacemaker when the phone is turned on.

•Do not carry your phone near your heart.

•Use the ear opposite the pacemaker.

•If you have any reason to suspect that interference is taking place, turn off your phone immediately.

Hearing aids—Some digital wireless phones may interfere with hearing aids. In the event of such interference, you may want to consult your service provider or call the customer service line to discuss alternatives.

Other medical devices—If you use any other personal medical device, consult the manufacturer of the device to determine if it is adequately shielded from external RF energy. Your physician may be able to help you obtain this information.

In health care facilities—Turn your phone off in health care facilities when instructed. Hospitals and health care facilities may be using equipment that is sensitive to external RF energy.

Potentially unsafe areas

Posted facilities—Turn your phone off in any facility when posted notices require you to do so.

Vehicles—RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer of the device to determine if it is adequately shielded from external RF energy.

Blasting areas—Turn off your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

Potentially explosive atmospheres—Turn off your phone when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.

They include:

•fueling areas such as gas stations

•below deck on boats

•transfer or storage facilities for fuel or chemicals

•vehicles using liquefied petroleum gas, such as propane or butane

•any other area where you would normally be advised to turn off your vehicle engine

Use with care

Use only in normal position (to ear). Avoid dropping, hitting, bending, or sitting on the phone.

Avoid magnetic environments

Keep the phone away from magnets which can cause improper functioning of the phone.

Keep phone dry

Keep phone dry. Damage can result if the phone gets wet. Water damage is not covered under warranty.

Resetting the phone

If the screen seems frozen and the keypad does not respond to keypresses, reset the phone by completing the following steps:

1.Remove the battery door.

2.Remove and replace the battery.

If the problem persists, return the phone to the dealer for service.

Accessories

Use only Kyocera-approved accessories with Kyocera phones. Use of any unauthorized accessories may be dangerous and will invalidate the phone warranty if said accessories cause damage or a defect to the phone.

Radio Frequency (RF) energy

Your telephone is a radio transmitter and receiver. When it is on, it receives and sends out RF energy. Your service provider’s network controls the power of the RF signal. This power level can range from 0.006 to 0.6 watts.

In August 1996, the U.S. Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. These guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies in the following reports:

•ANSI C95.1 (American National Standards Institute, 1992)

•NCRP Report 86 (National Council on Radiation Protection and Measurements, 1986)

•ICNIRP (International Commission on Non-Ionizing Radiation Protection, 1996)

Your phone complies with the standards set by these reports and the FCC guidelines.

E911 mandates

Where service is available, this handset complies with the Phase I and Phase II E911 Mandates issued by the FCC.

Hearing Aid Compatibility (HAC) with Mobile Phones

Some mobile phones and hearing devices (hearing aids and cochlear implants), when used together, result in buzzing, humming, or whining noises detected by the user.

Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.

The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated.

Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees and results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

M-Ratings—Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.

T-Ratings—Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)

User Guide

Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you choose the proper rating for your mobile phone. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.

For more information about hearing aid compatibility, visit the FCC's Consumer & Governmental Affairs Bureau Web site at www.fcc.gov/cgb/dro.

Kyocera Wireless Corp.

www.kyocera-wireless.com

To purchase accessories, visit

www.kyocera-wireless.com/store

Table of Contents

1 Get Started . . . . . . . . . . . . . . . . . . . . . . . . . 9

Phone Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Attach the Lanyard . . . . . . . . . . . . . . . . . . . . . . .11 Phone Overview . . . . . . . . . . . . . . . . . . . . . . . . .11 Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Guide Conventions . . . . . . . . . . . . . . . . . . . . . . .16

2 Call Features . . . . . . . . . . . . . . . . . . . . . . 18

Power Phone Up . . . . . . . . . . . . . . . . . . . . . . . .18 Make Phone Calls. . . . . . . . . . . . . . . . . . . . . . . .18 Answer Phone Calls . . . . . . . . . . . . . . . . . . . . . .18 End Phone Calls . . . . . . . . . . . . . . . . . . . . . . . . .19 Activate Voice Dialing. . . . . . . . . . . . . . . . . . . . .19 Volume Control . . . . . . . . . . . . . . . . . . . . . . . . .19 Use Speed Dialing . . . . . . . . . . . . . . . . . . . . . . .19 Emergency Services . . . . . . . . . . . . . . . . . . . . . .20

3 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 21

Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . .21 Text Entry Quick Reference . . . . . . . . . . . . . . . .22

4 Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Launch Browser. . . . . . . . . . . . . . . . . . . . . . . . .24 Use Browser Options . . . . . . . . . . . . . . . . . . . . .24 Search for a Web Site . . . . . . . . . . . . . . . . . . . . .25 Use a Bookmark . . . . . . . . . . . . . . . . . . . . . . . .25 Check Browser Alerts . . . . . . . . . . . . . . . . . . . . .25 Set Web Prompt . . . . . . . . . . . . . . . . . . . . . . . . .26

5 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 27

View Contacts Directory . . . . . . . . . . . . . . . . . . .27 Add Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Customize Contacts . . . . . . . . . . . . . . . . . . . . . .28 Contact Groups . . . . . . . . . . . . . . . . . . . . . . . . .31 Search Contacts . . . . . . . . . . . . . . . . . . . . . . . . .32 Erase All Contacts. . . . . . . . . . . . . . . . . . . . . . . .33 Count Contacts . . . . . . . . . . . . . . . . . . . . . . . . . .33

6 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Take a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Change Camera Options. . . . . . . . . . . . . . . . . . . 34 Camera Indicators and Icons . . . . . . . . . . . . . . . 35

7 Messaging . . . . . . . . . . . . . . . . . . . . . . . . 36

Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Multimedia Messages. . . . . . . . . . . . . . . . . . . . . 38 Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . 41 Work with Messages . . . . . . . . . . . . . . . . . . . . . 42 Message Settings . . . . . . . . . . . . . . . . . . . . . . . . 43 Message Groups. . . . . . . . . . . . . . . . . . . . . . . . . 46

8 Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 48

Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 View Call Timers . . . . . . . . . . . . . . . . . . . . . . . . 49 View Data Counter . . . . . . . . . . . . . . . . . . . . . . . 49

9 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Create a Custom Menu . . . . . . . . . . . . . . . . . . . . 51 Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Voice Features . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 View Phone Information . . . . . . . . . . . . . . . . . . 66

10 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Use Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . 70 Use Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Use Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Use Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . 71

User Guide

Memopad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

11 BREW Apps . . . . . . . . . . . . . . . . . . . . . . . 73

How does BREW Work? . . . . . . . . . . . . . . . . . . 73

Download an Application . . . . . . . . . . . . . . . . . 73

Open an Application . . . . . . . . . . . . . . . . . . . . . 74

View Application Details . . . . . . . . . . . . . . . . . . 74

Remove an Application . . . . . . . . . . . . . . . . . . . 74

Disable an Application . . . . . . . . . . . . . . . . . . . 74

Check Available Memory . . . . . . . . . . . . . . . . . . 74

12 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 75

Browse Camera Pictures . . . . . . . . . . . . . . . . . . 75

Modify a Picture . . . . . . . . . . . . . . . . . . . . . . . . 75

Browse Saved Images . . . . . . . . . . . . . . . . . . . . 76

Browse Wallpapers . . . . . . . . . . . . . . . . . . . . . . 76

Edit Wallpaper Shuffle. . . . . . . . . . . . . . . . . . . . 76

Browse Screensavers . . . . . . . . . . . . . . . . . . . . 77

Browse Caller IDs . . . . . . . . . . . . . . . . . . . . . . . 77

Browse Saved Sounds . . . . . . . . . . . . . . . . . . . . 77

Browse Ringers. . . . . . . . . . . . . . . . . . . . . . . . . 77

Edit Ringer Shuffle . . . . . . . . . . . . . . . . . . . . . . 78

Browse Voice Memos . . . . . . . . . . . . . . . . . . . . 78

Delete All Files . . . . . . . . . . . . . . . . . . . . . . . . . 79

Playback Tools . . . . . . . . . . . . . . . . . . . . . . . . . 79

13 Voice Commands. . . . . . . . . . . . . . . . . . . 80

Voice Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Voice Commands . . . . . . . . . . . . . . . . . . . . . . . 80

Voice Command Settings . . . . . . . . . . . . . . . . . . 82

14 Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . 83

User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Customer Support . . . . . . . . . . . . . . . . . . . . . . . 83

Qualified Service . . . . . . . . . . . . . . . . . . . . . . . . 84

Phone Accessories . . . . . . . . . . . . . . . . . . . . . . 84

Become a Product Evaluator . . . . . . . . . . . . . . . 84

1 Get Started

Phone Battery

Install the Battery

To install the battery:

1.Hold the phone face down.

2.Find notch directly above the back cover. It is square. Use the notch to slide the cover down. Lift the cover from the bottom to remove.

3.Place the battery in the battery casing with the metal contacts facing toward the bottom of the phone. The metal contacts of the battery must make contact with the metal contacts of the battery casing.

4.Replace the battery door by sliding the notches into the openings on each side of the battery casing.

5.Snap the cover into place.

Charge the Battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery:

1.Connect the AC adapter to the microUSB jack on the side of the phone.

2.Plug the adapter into a wall outlet.

The battery icon in the upper-right corner of the screen tells you whether the phone is:

–Charging (the icon is animated)

–Partially charged

–Fully charged

User Guide

You can safely recharge the battery at any time, even if it has a partial charge.

Warning: The battery will not charge if you use the phone while it is connected to an AC adapter.

Note: Before removing the battery, make sure the phone is powered off.

Battery Safety Guidelines

•Do not disassemble or open the battery.

•Do not crush, bend, deform, puncture, or shred the battery.

•Do not attempt to insert foreign objects into the battery.

•Do not immerse the battery or expose it to water or other liquids. Even if a battery appears to dry out and operate normally, internal parts can slowly corrode and pose a safety hazard.

•Always keep the battery between 15 °C and 25 °C (59 °F and 77 °F). Do not expose the battery to extremes of temperature (heat or cold), fire, or other hazards such as a cooking surface, iron, or radiator.

•Never use any damaged battery.

•Only use the battery for its intended phone.

•Only use the battery with a qualified charger. Use of an unqualified battery charger may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether

a charger is qualified, contact customer support.

•Do not short-circuit the battery or allow metallic conductive objects—such as keys, coins, or jewelry—to contact the battery’s terminals.

•Replace the battery only with another qualified battery. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a replacement battery is compatible, contact customer support.

•Promptly dispose of used batteries in accordance with local regulations and recycle if possible. Do not dispose as household waste.

•Supervise all battery usage by children.

•Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, an internal short-circuit can occur and pose a safety hazard. If you suspect battery damage, take it to a service center for inspection.

•Improper battery use may result in a fire, explosion, or other hazard.

10	Phone Battery

Common Causes of Battery Drain

•Playing games or using the Web.

•Taking pictures with the flash on.

•Keeping backlighting on.

•Operating in digital mode when far away from a base station or cell site.

•Using data cables or accessories.

•Operating when no service is available, or service is available intermittently.

•High earpiece and ringer volume settings.

•Repeating sound, vibration, or lighted alerts.

Attach the Lanyard

To attach the lanyard:

1.Hold the phone face down.

2.Find the notch directly above the back cover. It is square. Use the notch to slide the cover down. Lift the cover from the bottom to remove.

3.Remove the battery. Use the notch directly below the battery casing. It is a half circle.

4.Thread the lanyard through the upper square

notch’s hole.

5.Make sure the lanyard catches on the hook inside the hole.

6.Insert the battery.

7.Replace the battery door cover and snap it into place.

Phone Overview

Get to Know Your Phone

The phone is shown here in the open position.

1.Home screen.

User Guide

2.Left softkey selects items that appear on the lower left of the display. At the home screen, you can select Menu.

3.Navigation key scrolls through lists and text entry fields and accesses the following shortcuts from the home screen.

–Scroll left to launch Browser.

–Scroll right to go to Tools > Voice Memo.

–Scroll up to create a custom menu shortcut.

–Scroll down to go to Recent Calls > All.

4.Send key starts or answers a call. Press once to activate voice command, twice to display the All Calls list, and three times to redial the last number dialed. Press and hold to activate voice commands.

5.Speakerphone key activates the speakerphone and answers incoming calls.

6.Keypad for entering numbers, letters, or symbols.

7.* Shift key changes the text mode in text entry.

8.0 Next key cycles through word choices during text entry.

9.Right softkey selects items that appear on the lower left of the display. At the home screen, you can select Contacts.

10.OK key selects a menu item or option. At the home screen, you go to the main menu when you press the OK key.

12	Phone Overview

11.End key turns the phone on and off, ends a call or browser session, and returns you to the home screen.

12.Back key erases characters in text entry and returns you to the previous screen when navigating through menus.

13.# Space key enters a space during text entry. Press and hold to activate or deactivate Silent mode.

The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent accidental key presses.

1.Camera lens.

2.Volume key raises or lowers ringer volume.

3.Camera key activates Camera mode. To activate camera mode, press and hold the

Camera key.

4.External screen displays time, caller ID, signal, and battery strength.

5.Lightpipe LED.

6.Jack for microUSB cable (sold separately).

7.Jack for a hands-free headset (sold separately).

Warning: Inserting an accessory into the incorrect jack will damage the phone.

Lightpipe LED Behavior

Your phone’s lightpipe LED displays different patterns depending upon the alert. You can disable the lightpipe LED, see “Set LightPipe Behavior” on page 56.

New message	One flash. If you do not
	respond, your phone will flash
	again to remind you.

Incoming	Heartbeat pulse. It will
call	continue until you answer the
	phone or miss the call.

Missed call	One flash. If you do not
	respond, your phone will flash
	again to remind you.

In call	Wave pulse. It will continue
	until the call ends.

Alarm	Three flashes. It will continue
	until you respond to the alert.

Scheduler	Three flashes. It will continue
	until you respond to the alert.

User Guide

Bluetooth	One flash. It will continue until
	you respond to Bluetooth
	request.

Low battery	One flash. It will continue until
	you charge the phone.

Charging	Wave pulse. Displays when the
	phone is being charged.

Note: Incoming emergency calls always activate the LED, even if you have disabled it.

Screen Icons

These icons may appear on your phone’s screen.

The phone is operating in IS95 digital mode.

The phone is operating in IS2000 (1X) digital mode.

The phone is receiving a signal. You can make and receive calls. Fewer bars indicate a weaker signal.

A call is in progress.

The phone has a standard speed data connection.

The phone is not receiving a signal. You cannot make or receive calls.

Content is DRM protected.

Data service is available and active on your phone. Check with your service provider for availability.

(blinking) The phone is sending high-speed data.

(blinking) The phone is receiving high-speed data.

Data service is available, but the phone is dormant.

Bluetooth wireless technology is enabled (On).

Bluetooth wireless technology is disabled (Off).

The phone is roaming outside of its home service area.

New text message.

New voice message.

New voice and text message.

New photo message.

New photo and voice message.

New photo and text message.

14	Phone Overview

New photo, voice and text message.

The phone is set to light up instead of ring.

The phone is set to vibrate or to vibrate and then ring.

The speaker phone is turned on.

Position location is set to your service provider and to emergency services.

Position location is set to emergency services only.

The phone is in camera mode.

The phone is set to auto answer.

The phone is in privacy mode or is accessing a secure Web site.

The alarm clock is set.

The battery is fully charged. The more black bars, the greater the charge.

The phone is in airplane mode.

Main Menu

The contents of the main menu are as follows:

User Guide

Browser	Messaging	Settings	BREW Apps
Launches the Browser	New Text Msg	Bluetooth	Mobileshop
Contacts	New Pic Msg	Sounds	Settings
View All	Voicemail	Display	Help
Add New	Inbox	Convenience	Media Gallery
Groups	Browser Alerts	Voice Features	Images
Speed Dial List	Sent Msgs	Accessories	Sounds
Voice Dial List	Outbox	Network	Delete All
Erase Contacts	Saved Msgs	Security
Contacts Count	Drafts	Phone Info
Camera	Msg Settings	Tools
Launches the Camera	Message Groups	Voice Memo
	Erase Msg	Scheduler
	Recent Calls	Alarm Clock
	All	Tip Calculator
	Incoming	Calculator
	Outgoing	Timer
	Missed	Stopwatch
	Data	Memopad
	Erase Call List	World Clock
	Call Timer
	Kilobyte Counter

Note: The menu items on your phone can change depending on the services provided by your service provider. Check with your service provider.

Guide Conventions

In this guide, the following conventions are used when describing phone features.

Select means to press the Left softkey, Right softkey or OK key to select an item seen on the display. For example, “Select Menu” tells you to

physically press the left softkey to choose Menu from the display.

Press means to press a phone key. For example, “Press the Send key to make a phone call” tells you to physically press the Send key on your phone.

16	Guide Conventions

Scroll means to use the Navigation key to move though a list on the display. For example, “Scroll through your Contacts list to choose a contact” means to physically press the Navigation key up or down to scroll through the list on the display.

>(greater than symbol) tells you to select an option from a menu or list. For example, “Menu

>Settings” means to:

1.Press the left softkey to select Menu.

2.Scroll to the Settings option.

3.Press the OK key to select Settings.

User Guide

2 Call Features

This section describes call features such as volume, holding calls, speed dialing and other features.

Power Phone Up

•To turn your phone on, press and hold the End key and wait until the phone display lights up.

•To turn your phone off, press and hold the End key until the phone plays a musical chime and turns off.

Make Phone Calls

Make sure you are in an area where a signal can be received. Look for the signal strength icon on the home screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better.

When the phone has been idle for a time, it changes to power save mode. When you see “Power Save” on your phone’s screen, press any key to return to normal operating mode.

There are several ways you can make a phone call.

Call Using a Number

1.Enter a phone number.

2.Press the Send key.

Call Using a Contact

1.Select Menu > Contacts > View All to open your contacts list.

2.Highlight a contact and press the Send key.

Call Using Voice Commands

You can use voice commands to call a contact from your voice dial list or to dial a phone number. For more information, see “Voice Commands” on page 80.

Redial a Number

1.Press the Send key twice to open your call history.

2.Highlight a phone number or contact and press the Send key.

Note: To redial the last number called, received or missed, press the Send key three times.

Answer Phone Calls

When a call comes in, the phone rings, vibrates, or lights up. The phone number of the caller also appears if it is not restricted. If the number is stored in your Contacts directory, the contact’s name appears. There are several ways you can answer a phone call.

Answer Using Earpiece

Press the Send key.

18	Power Phone Up

Answer Using Speakerphone

Press the Speakerphone key.

Answer Using Flip

You can set the phone to answer immediately when you open the flip. This feature does not apply to incoming data calls. For more information, see “Enable Open to Answer” on page 59.

End Phone Calls

To end a phone call press the End key.

Activate Voice Dialing

1.Press and hold the Send key.

2.Follow the prompts.

For more informaton, see “Voice Commands” on page 80.

Volume Control

There are several ways to control the volume of your phone.

Adjust Volume during a Call

To adjust the earpiece volume during a call, press the Volume key up or down.

Use the Speakerphone

Your phone has a built-in speakerphone.

•To turn on the speakerphone, press the Speakerphone key. The speakerphone icon

appears on the home screen when the speakerphone is on.

•To turn off the speakerphone, press the

Speakerphone key again.

Note: If you press the Speakerphone key during an incoming call, you will answer the call.

Silence an Incoming Call

•To silence the phone without answering the call select Silence, press the Back key, or press the Volume key.

•To silence the phone and answer the call, select Silence and then press the Send key.

Note: In the absence of voicemail, this feature drops the call.

Use Speed Dialing

Speed dialing allows you to assign a oneor two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Customize a Number” on page 28.

To call a contact that has a speed dial location.

1.Enter the oneor two-digit speed dial location.

2.Press the Send key.

User Guide

Emergency Services

Call Emergency Service

You can call an emergency code, even if your phone is locked or your account is restricted. When you call, your phone enters Emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.

To place dial an emergency code:

1.Enter your 3-digit emergency code.

2.Press the Send key.

Note: Regardless of your 3-digit emergency code (911, 111, 999, 000, etc.), your phone operates as described.

Exit Emergency Services

When you have completed the emergency call:

1.Select Exit.

2.Select Exit again to confirm your choice.

Note: To determine who has access to your location, see “Set Location Information” on page 64.

20	Emergency Services

3 Text Entry

You can enter letters, numbers, and symbols in contacts, text messages, and your banner.

Text Entry Modes

The current text entry mode (and capitalization setting, when applicable) are indicated by icons.

The text entry screen has the following features:

1.Characters remaining that you can type. Allowed length of messages can vary depending on your service.

2.Text entry fields.

3.Current capitalization setting.

4.Current text entry mode.

There are five text entry modes:

Case Change

Numbers Only

Normal Alpha

Rapid Entry

Add Symbol

Note: The mode you start in depends on the task you are doing. For example, when entering a phone number, you’re in Numbers Only mode. When entering a name for a contact, you’re in Normal Alpha mode.

Enter Numbers

•To enter a number while in Numbers Only mode, press a number key once.

•To enter a number while in Normal Alpha or Rapid Entry mode, press and hold a number key until the number appears on the screen.

Enter Words Letter by Letter

1.Press a key once for the first letter, twice for the second letter, and so on. If your phone is set to Spanish, French, or Portuguese, accented letters are available.

2.Wait for the cursor to move right and enter the next letter.

Note: To enter a space, press # Space key.

Enter Words Quickly

When you press a series of keys using Rapid Entry mode, your phone checks its dictionary of

User Guide

common words and guesses at the word you are trying to spell.

1.For each letter of the word you want, press the key once. For example, to enter the word “any” press the 2 > 6 > 9 keys.

2.If the word doesn’t match what you want, press 0 Next key to look at other word matches.

3.When you see the word you want, press the # Space key.

Enter Symbols

While entering text in Normal Alpha mode, you can enter symbols by pressing the 1 key until you see the symbol you want. Using this method, you have access to the following symbols:.

. @ ? ! - , & : ‘ ]

To access the full set of symbols:

1.From the text entry screen select Options >

Add Symbol.

2.Scroll up or down to view the list of symbols.

3.Press the number key corresponding to the symbol to enter it.

Change Modes

Sometimes you need to change modes. For example, to enter numbers in an email address while in Normal Alpha mode, you must change to numbers only mode, enter the numbers, and then change back to Normal Alpha mode to complete the address.

To change text entry modes:

•Press and hold * Shift key until the icon for the mode you want appears at the top of the screen.

•You can also select Options then select a different mode.

Note: You can change the default text entry mode when creating a text message. For more information, see “Set Default Text” on page 45.

Change Capitalization

You can change capitalization at any time while entering text.

Press the * Shift key to choose upper or lower case while in Normal Alpha mode.

Text Entry Quick Reference

This table gives instructions for entering letters, numbers, and symbols. For more information, see “Text Entry Modes” on page 21.

22	Text Entry Quick Reference

To..	Do this..

Enter a letter	Use Normal Alpha mode and press a key until you
	see the letter your want.

Enter a number	Use Normal Only mode and press a key.

Enter a symbol	Use Normal Alpha mode and press a key until you
	see the letter your want.

Enter a space	Press the # Space key.

Erase a character	Press the Back key.

Erase all characters	Press and hold the Back key.

Move the cursor right or left	Scroll left or right.

Move the cursor up or down	Scroll up or down.

Change text entry modes	Press and hold the # Space key.

Capitalize any letter	In Normal Alpha mode, press the * Shift key.
	Choose uppercase.

Lowercase any letter	In Normal Alpha mode, press the * Shift key.
	Choose lowercase.

Initial caps	In Normal Alpha mode, press the * Shift key.
	Choose sentence case.

Select soft options on screen	Press the appropriate left or right softkey.

User Guide

4 Browser

You can use your phone to browse the Internet if you have obtained phone Internet services from your service provider and if over-the-air Internet access is available in your area.

Note: You cannot receive incoming calls while you are using the browser.

Launch Browser

1.Select Menu > Browser. A message about airtime fees appears every time you start the browser. For more information about how airtime is charged, contact your service provider.

2.Select OK to continue. If this is the first time you have connected to the Internet, a message informs you that security is not yet enabled for your browser.

3.Select Yes to enable security. When you are connected, a browser home page appears. It has a list of bookmarks and some browser menu options at the bottom of the screen. The lock icon appears in a secure session. An underline and an arrow indicate that there is more text. Scroll down to view more text. Press the Back key to return to the previous screen.

4.To choose a site, scroll to the link and press the OK key.

5.When you have finished using the browser, press the End key to exit.

Use Browser Options

You can configure your browser.

During an active browser session, select Options and one of the following:

•Display Mode selects how the Web page is displayed. Normal Screen configures the content to fit on the screen. Wide Screen does not fit the content to the screen.

•Zoom Levels allows you to zoom into a specific area of the page. This option only appears when the Wide Screen mode is active.

•Map On shrinks the Web page to display the full page on the screen. This allows you to choose certain areas of the page to zoom into.

24	Launch Browser

This option only appears when the Wide Screen mode is active.

•Forward moves to next page in your navigation trail.

•Back moves to previous page in your navigation trail.

•Home returns to the browser home page.

•Add to Bookmarks saves the current page as a bookmark for easy access.

•Bookmarks opens a list of your saved bookmarks.

•Search opens the browser search page.

•Send URL sends the URL of the current page with a text message.

•Go to URL... allows you to enter the URL of a new page and go there.

•Refresh reloads the current page.

•History displays the pages you have visited.

•Quit exits the browser.

•More... > Show URL displays the entire URL of the current page.

•More... > Restart Browser relaunches the browser.

•More... > Clear IDs and Passwords clears the browser cache of user names and passwords.

•More... > Certificates displays certificates used in the current browser session.

•More... > Save Items on the Page allows you to save content from the current page to your phone.

•More... > Preferences allows you to change the home page and other browser settings.

•More... > About displays information about your browser session.

Search for a Web Site

How you search for a Web site depends on your service provider. For more information, contact your service provider.

Use a Bookmark

1.Select Menu > Browser.

2.Select OK to accept browser fees.

3.From your Web home page, select Options > Bookmarks. A list of bookmarks appears.

4.Select a bookmark.

Check Browser Alerts

Alerts received from a Web site are sent to your Browser Alerts folder. To check them, do the following:

1.Select Menu > Messaging > Browser Alerts. This action launches the browser inbox.

2.Select OK to accept browser fees.

3.Select an alert and follow the prompts.

User Guide

Set Web Prompt

You can set a prompt to confirm the start or exit of the browser. See “Set Web Alerts” on page 64.

26	Set Web Prompt

5 Contacts

Use your phone’s contacts directory to store information about a person or company. Each contact entry can have up to six phone numbers, two email addresses, two Web addresses, two street addresses, and a space for notes.

View Contacts Directory

To view existing contacts in your phone:

1.Select Menu > Contacts > View All. Your contacts are listed alphabetically.

2.Highlight a contact and do one of the following:

–Press the Send key to call the contact.

–Press the OK key view the contact’s details.

–Select New to create a new contact.

–Select Options > Call to call the contact.

–Select Options > Send Text Msg to send a text message.

–Select Options > Send Pict Msg to send a picture message.

–Select Options > View Contact to view the contact’s details.

–Select Options > Edit Contact to edit the contact.

–Select Options > Erase Contact to call the contact.

–Select Options > Send as vCard to send contact as a vCard.

–Select Options > Send All to send all contacts to a Bluetooth device or a connected printer.

–Select Options > Contacts Menu to access the Contacts menu.

Add Contacts

Add Contact from Home Screen

To add a contact to your Contacts directory:

1.From the home screen, enter a phone number to save (include the area code).

2.Select Save > Save New Contact.

3.Enter a name for the contact.

4.Enter additional phone numbers, email addresses, Web addresses and note, if needed. Scroll up or down to move through the contact fields.

5.When you are done entering information, select Save.

Add Contact from Contacts Menu

To add a contact to your Contacts directory:

1.Select Menu > Contacts > Add New.

2.Enter a name for the contact. When you are done scroll down to the next field.

User Guide

3.Enter a primary number for the contact.

4.Enter additional phone numbers, email addresses, Web addresses and note, if needed. Scroll up or down to move through the contact fields.

5.When you are done entering information, select Save.

Add Code or Extension

When you save the phone number of an automated service, you may include a pause to stop dialing. For example, a pause where you would wait to dial an extension.

1.From the home screen, enter a phone number.

2.Select Options and a type of pause:

–Time Pause causes the phone to stop dialing for two seconds.

–Hard Pause causes the phone to stop until you select Release while making the call.

3.Enter the remaining numbers and select

Save > Save New Contact.

4.Complete the contact and select Save.

Customize Contacts

Edit Contact Details

To edit details of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

3.At the contact details screen, select Edit.

4.Edit or add phone numbers, email addresses, Web addresses and notes. Scroll up or down to move through the contact fields.

5.When you are done entering information, select Save.

Customize a Name

To customize the name of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

3.At the contact details screen, scroll to the name.

4.Select Options and one of the following.

–Ringer assigns a specific ringer to the contact.

–Msg Tone assigns a specific message tone to the contact.

–Picture assigns a specific picture to the contact.

–Erase Contact deletes the contact. This will erase the entire contact.

–Send as vCard sends the contact as a vCard.

Customize a Number

To customize the number of an existing contact.

1.Select Menu > Contacts > View All.

28	Customize Contacts

2.At the contacts directory, select a contact.

3.At the contact details screen, scroll to a number.

4.Select Options and one of the following.

–Call calls the contact.

–Send Text Msg sends a text message.

–Send Pict Msg sends a multimedia message.

–Prepend displays the contact details screen for you to change the number (adding an area code) or other data of the contact.

–Add Speed Dial adds the number to your speed dial list.

–View Number displays the number.

–Erase Number deletes number from the contact.

–Secret / Not Secret makes the number secret. It will not appear on the screen until the lock code is entered. Secret numbers can be called without a lock code.

–Primary Number makes this number the primary number for the contact.

–Send as vCard sends the contact as a vCard.

–Add To Group adds the number to the business, personal or custom group.

Customize an Email Address

To customize the email address of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

3.At the contact details screen, scroll to an email address.

4.Select Options and one of the following.

–Send Text Msg sends a text message.

–Send Pict Msg sends a multimedia message.

–View Address displays the email address.

–Add To Group adds the email address to the business, personal or custom group.

–Erase Address deletes email address from the contact.

–Secret / Not Secret makes the email address secret. It will not appear on the screen until the lock code is entered.

–Send as vCard sends the contact as a vCard.

Customize an IM Address

To customize the IM address of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

User Guide

3.At the contact details screen, scroll to an IM address.

4.Select Options and one of the following.

–View IM displays the street address.

–Erase IM deletes street address from the contact.

–Send as vCard sends the contact as a vCard.

Customize a Web Address

To customize the Web address of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

3.At the contact details screen, scroll to a Web address.

4.Select Options and one of the following.

–Launch Web launches the Web browser and goes to Web address.

–Send Pict Msg sends a multimedia message.

–View Web displays the Web address.

–Erase Web deletes Web address from the contact.

–Send as vCard sends the contact as a vCard.

Customize a Street Address

To customize the street address of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

3.At the contact details screen, scroll to a street address.

4.Select Options and one of the following.

–View Address displays the street address.

–Erase Address deletes street address from the contact.

–Send as vCard sends the contact as a vCard.

Customize a Note

To customize the note of an existing contact.

1.Select Menu > Contacts > View All.

2.At the contacts directory, select a contact.

3.At the contact details screen, scroll to a note.

4.Select Options and one of the following.

–View Note displays the note.

–Erase Note deletes note from the contact.

–Secret / Not Secret makes the note secret. It will not appear on the screen until the lock code is entered.

–Send as vCard sends the contact as a vCard.

30	Customize Contacts

+ 67 hidden pages