Kyocera FS-C5350 SERVICEBULLETINS 2K8 0007 B176

SYS

will be

reset

due to the

different way of calculation.

registration gap

more than the above

can

not be adjusted

.)

Check

SUM

Current

Ver.

Service Bulletin Ref. No.

Subject

(Page.1/3)

2K8-0007 (B176)

<Date> June 21, 2011

Firmware Upgrade (System: Ver.004.005),
(Engine: Ver.004.001)

FS-C5350DN_v04.00.0010_(2011-05-16)

Model

FS-C5350DN

Topic

The firmware was upgraded as follows.

Content of changes

No. Item Details CTL FW

1

Measures against the panel
display lockup after setting
time zone

2

Change of the Coverage
display on the status page

3 Measures against the color

registration gap

If setting time zone to “-3:00 Brasilia” from Command Center,
there may be no response from the network and the panel
display may be locked up. Therefore, this was corrected.

The term used on the service status page was changed from
"Digital Dot Coverage" to "Print Coverage".

- The coverage is simply converted with the area image ratio
based on the current dot number data so that the accuracy as
the reference value of the toner consumption can be improved.

Precaution)

- When upgrading the firmware, the Digital Dot Coverage data

The color registration gap could not be corrected by executing
the auto color registration adjustment. Therefore, this was
corrected.
(Since the margin to detect the color patches for the color
registration adjustment is +/-1.5mm (or 70 dots), the color

527476
TP-10­313
KMA-D­1012-03

512311

555358

SYS

ENG

<For more details, please refer to the next pages.>

Program No.

SYSTEM 2K8_3000004005 - 004.005 2011/5/6 003.008

SYSTEM 2K8_3000004005 - 004.005 2011/5/6 003.008 For KMKR

ENGINE 2K8_1000004001 71c8 004.001 2011/414 003.001

Ver. Status Date

Remark

←←←← New upgrade

←←←← New upgrade

←←←← New upgrade

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board please upgrade each kind of the firmware to the latest version at the same
time.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure: Please upgrade the firmware when the problem described above arises.

Serial Nos. of the Affected Machines: Planned from May 2011* production

*The above is the plan at the present moment. Please note that this information is subject to change.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

and

"ü"

was corrected.

data

file

bands

with a certain file

certain file was printed.

Therefore, this was corrected.

printing

file

corrected.

Therefore, this was corrected.

Therefore, this was corrected.

with a certain file

certain PDF file

was corrected.

SCPI command

macro data

incorrect

.

Therefore, this was corrected.

card

corrected.

Service Bulletin Ref. No.

<Date> June 21, 2011

<Continued content of changes>

No. Item Details

Measures against the garbled

4

letters with umlaut such as "ä"

Measures against the print

5

position error with a certain

Measures against the CF46F

6

error with a certain PostScript

Measures against the CF248

7

error with a certain data

Measures against the black

8

Measures against the image

9

dropout with a certain form

Measures against the letter

10

dropout with a certain PCL data
Measures against the CF46F

11

error with a certain Vectorworks

Measures against the image

12

failure with a certain file

Measures against the image

13

failure with a certain file

Measures against the printing

14

error of the Big5 fonts

Measures against the print

15

failure with a certain software

Measures against the dropout

16

of frame borders and ruled lines

The letters with umlaut such as "ä" and "ü" might be
garbled when printing from a host system. Therefore, this

The print position on the second page was shifted to right
when printing a certain data. Therefore, this was corrected.

-------------

-----------

An abnormal image with black bands appeared when a

Characters and a part of ruled lines might drop out when
printing a certain form. Therefore, this was corrected.

-------------

The CF46F error appeared when printing a certain
Vectorworks file .Therefore, this was corrected.

A part of image was printed with a mosaic when a certain
file was output from the Mac Illustrator. Therefore, this was

The output image was not correct if it was printed from Mac
Illustrator CS-3. Therefore, this was corrected.

The Big5 fonts stored in a CF card could not be printed.

A certain logo image was not correctly printed with DATEV
(German accounting software) via KPDL Mini driver.

Frame borders and ruled lines might drop out when printing
a certain PCL form. Therefore, this was corrected.

(Page.2/3)

2K8-0007 (B176)

CTL FW

544626
TP-10-218
#859984

544637
TP-10-205
#1092454

544643
TP-10-237
KMAUS10-S16

544646
TP-10-240
KMA-D-1009­05
543829
TP-10-145

544594
TP-10-099
#1029000

544635
TP-10-196
KMIT10_0001
544599
TP-10-066
NP-Z10027

544603
TP-10-161
NP-Z10058

544607
TP-10-163
KMA-D-1006­09
544612
TP-10-110
Staurn_#200

544617
TP-10-171
#1069570

TP-10-086
#1024437

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

Measures against the system

17

error when direct printing a

Measures against the logo

18

dropout with a certain data

Measures against the printing

19

error of certain PostScript data
Measures against the abnormal

20

image with a certain file

Support for a certain macro

21

data
Measure against the letter

22

dropout with a data containing

Measure against the wrong

23

letter spacing with a certain

Measures against the incorrect

24

mail transmission time

Measures against the print

25

failure with KYOmulticode CF

-----------------

The logo to be printed on the second copy and after
dropped out when printing a certain data. Therefore, this

--------------

An image is partly filled with black solid image with a
certain PCL macro data. Therefore, this was corrected.

Unexpected image appeared when printing a certain macro
data. Therefore, this was corrected.

Many of letters dropped out when printing a data containing
SCPI command. Therefore, this was corrected.

-------------

Time difference information was not reflected to the mail
transmission time when sending out mail from the machine
for event setting, etc. by SMTP, and the time might be

A certain file could not be printed correctly if the
KYOmulticode CF card was inserted. Therefore, this was

KYOCERA MITA Europe B.V.

European Service & Development Center (ESDC)

544383
TP-10-037
#922548

544557
TP-10-070

544573
TP-10-118
UT-S10-017-4
544579
TP-10-149
#KMIT09_0016

543801
TP-10-228
NP-Z10074
543803
TP-10-229
#1105719

543807
TP-10-181
#1035012/Cas­#80

492435
TP-10-141
#1063295

561417
TP-10-022

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS

SYS