(Revised Issue 1) (Page.1/3)
Change of CLUTCH FEED/CLUTCH FEED L
FS-1100, FS-1300D, FS-1350DN, FS-1120D, FS-1320D,
FS-1370DN, FS-1028MFP, FS-1128MFP, FS-C5100DN,
FS-C5200DN, FS-C5300DN, FS-C5350DN, FS-C5400DN,
PF-500, PF-510
KDC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measures: No particular problem is expected.
Service Bulletin Ref. No. COM-0202 (A328)
<Date> May 10, 2013
This time, the description with (-->) was revised from the previous information.
<Number of changes: 1> The actual serial numbers were added (Pages 2-4).
(Installation target models of PF-500/510: FS-C5100DN, FS-C5200DN, FS-C5300DN, FS-C5350DN, FS-C5400DN)
Topic
The CLUTCH FEED (No.1) and the CLUTCH FEEED L (No.2) in the drive unit were changed as follows in order
to improve the quality.
Content of Changes
A metallic washer (thickness of 0.05 mm) was added between the bush and the rotor in the CLUTCH (Nos.1 & 2)
in order to increase the resistance against abrasion.
The part numbers of the CLUTCH (Nos.1 & 2) remain unchanged.
[Cross-section view of CLUTCH]
*The part with “O” in the SP column is a regular maintenance part.
(*) Printer: 3 pcs; PF-500/510: 2 pcs.
*1: The part numbers remain unchanged.
*2: (Applied models) FS-1100, FS-1300D, FS-1350DN, FS-1120D, FS-1300DN, FS-1370DN, FS-1028MFP,
FS-1128MFP, PF-500, PF-510
*3: (Applied models) FS-C5100DN, FS-C5200DN, FS-C5300DN, FS-C5350DN, FS-C5400DN
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
(Revised Issue 1) (Page.2/3)
Service Bulletin Ref. No. COM-0202 (A328)
<Date> May 10, 2013
(-->)
Serial Nos. of the Affected Machines
(Note) FS-1100, FS-1350DN: Currently no production
** The serial numbers with "**" were already informed last time.
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)