Page 1
Service Bulletin Ref. No.
Subject Part Change Information
[Parts Change Information]
PCI-0286 (B083)
<Date> March 17, 2011
FS-6030MFP, FS-6025MFP, FS-6025MFP/B, TASKalfa5550ci,
TASKalfa4550ci, TASKalfa3550ci, TASKalfa3050ci,
Model
TASKalfa550c, TASKalfa650c, TASKalfa750c, RADF-A2, SO-30,
PF-430, PF-310, PF-750, PF-760/PF-760(B), DF-73, DF-75,
DF-730, DF-780/DF-780(B), DF-470
--- Common (All models with the optional key counter)
Affected models:
PF-430 FS-6950DN, FS-6970DN, FS-6975DN
PF-310 FS-2000D, FS-3900DN, FS-4000DN, FS-2020D
FS-3920DN, FS-4020DN, FS-2025DN, FS-3925DN, FS-4025DN
PF-750 KM-C2520/C3225/C3232/C2525E/C3225E/C3232E/C4035E, FS-C8100DN+, EP C320DN,
KM-3050/4050/5050, FS-9530DN, FS-9130DN, EP 510DN
PF-760 TASKalfa500ci/400ci/300ci/250ci
PF-760(B) TASKalfa500ci/400ci/300ci/250ci, TASKalfa420i/520i
DF-73 KM-3035/4035/5035, FS-9120DN, FS-9520DN
DF-75 KM-2531/2530/3531//3530/4031/4030, FS-9100DN, FS-9500DN,
KM-3035/4035/5035, FS-9120DN, FS-9520DN
DF-730 KM-3050/4050/5050, FS-9130DN, FS-9530DN, EP 510DN,
KM-C2520/C3225/C3232/C2525E/C3225E/C3232E/C4035E, FS-C8100DN+, EP C320DN
DF-780 TASKalfa500ci/400ci/300ci/250ci
DF-780(B) TASKalfa500ci/400ci/300ci/250ci, TASKalfa420i/520i, TASKalfa300i, TASKalfa552ci, FS-C8500DN
DF-470 FS-6025MFP, FS-6025MFP/B, FS-6030MFP, FS-C8020MFP, FS-C8025MFP
Topic
The following parts were changed.
P2
P2
P3
toner bottle>
P3
P4
P5
P5
<Change of the quantity of the screws bundled in the optional key counter>
Common
<Change of the flyer for replacement procedure of the toner container>
FS-6030MFP, FS-6025MFP, FS-6025MFP/B
<Change of the labels for replacement procedure of the toner container/waste
TASKalfa5550ci, TASKalfa4550ci, TASKalfa3550ci, TASKalfa3050ci
<Change of the part name>
TASKalfa550c, TASKalfa650c, TASKalfa750c
<Improvement of paper stacking ability in the cassette>
TASKalfa550c, TASKalfa650c, TASKalfa750c
<Change of the part name>
RADF-A2, SO-30, PF-430, PF-310, PF-750, PF-760/PF-760(B), DF-73, DF-75, DF-730,
DF-780/DF-780(B)
<Change of the tray lift motor (Change of the part name)>
DF-470
(Page.1/5)
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Page 2
Com
bi
p
ati-
Old New Old New
Service Bulletin Ref. No.
[Parts Change Information]
(Page.2/5)
PCI-0286 (B083)
<Date> March 17, 2011
<Change of the quantity of the screws bundled in the optional key counter>
Common
The quantity of the screws (No.2) bundled in the optional key counter (No.1) was changed from 1 to 2 for
common use with TASKalfa550ci/4550ci/3550ci/3050ci.
Old Part
No.
1
2
*1: Please use the new optional key counter (No.1) when installing to the TASKalfa5550ci/4550ci/3550ci/3050ci.
Both of the new and old key counters can be used when installing to other models.
No.
302A369708
2A369708
7BB100420H
BB040740
New Part
No.
302A369709
2A369709
7BB100420H
BB040740
Description
SET PARTS KEYCOUNTER NEW COLOR 1 1
+(+) BIND TAP-TITE S SCREW M4X20
CRFREE
Q’ty
1 2
lity
(*1) O
O -
Remarks
Product
<Change of the flyer for replacement procedure of the toner container
FS-6030MFP, FS-6025MFP, FS-6025MFP/B
The illustration of the procedure 4 (unpacking direction of the case) on the flyer for replacement procedure of the
toner container affixed on the front cover inside was changed to the one along with the actual parts.
<Flyer for replacement procedure of the toner container (It is not individually supplied to field.)>
(Old)
(New)
--> From the available timing in the April 2011 production>
Corrected illustration
(Unpacking direction of the case)
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Page 3
Fig. Ref. Part No.
Old part
name
New part
name
5JN72GQ0
Service Bulletin Ref. No.
[Parts Change Information]
(Page.3/5)
PCI-0286 (B083)
<Date> March 17, 2011
<Change of the labels for replacement procedure of the toner container/
TASKalfa5550ci, TASKalfa4550ci, TASKalfa3550ci, TASKalfa3050ci
The illustrations framed by the red line (unpacking direction of the case) on the labels for replacement procedure
of the toner container/waste toner bottle affixed on the machine front side of the PARTS INNER UNIT SP
(302LC9401_/302LK9401_) was changed to the one along with the actual parts.
<Labels for the replacement procedure of the toner container/waste toner bottle>
(Those labels are not individually supplied to field.)
(Old)
(New)
waste toner bottle --> Planned from the March 2011 production>
<Change of the parts name>
TASKalfa550c, TASKalfa650c, TASKalfa750c
The following part name was changed for the part control reason. (The part number remains unchanged.)
81 6
305JN72GQ0
GASKET-5-12-4
GASKET-5-12-14
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Page 4
Com
bi
pati
Old New Old New
X
Adding the rib
Service Bulletin Ref. No.
[Parts Change Information]
(Page.4/5)
PCI-0286 (B083)
<Date> March 17, 2011
<Improvement of paper stacking ability in the cassette --> After using up the old stock>
TASKalfa550c, TASKalfa650c, TASKalfa750c
The shape of the cassette (No.1) and the lift plate (No.2: The part number of the new part was registered this
time) was changed as follows in order to improve the paper stacking ability in the cassette so that the paper will
not be caught even if the paper is set toward the conveying direction (X direction in the figure below).
No.1
[Cross section view of section B in the figure above
(Position for the pad to prevent multi-feeding)]
Before
After
Lowering the paper installation side of the affixing
part where the pad is affixed.
Old Part
No.
305JN71J00
1
5JN71J00
2 ------------
*1: The part number of No.1 remains unchanged.
*2: The lift plate has been used since the first production. However, the part number of the new lift plate was newly
registered in order to supply to field due to the change of the shape.
No.
No.2
New Part
No.
305JN71J00
5JN71J00
305JN72R50
5JN72R50
A
B
C
No.2
Description
CASSETTE-F43X 1 1
TRAY ASSY:ASYS-TRAY-CST-F43X - 1
[Section A in the left figure]
Before
Changing the shape of the metal plate edge
After
Adding the rib
to the chamfer
edge (No.1)
[Section C in the above left figure]
Before
The metal plate edge is changed to the slant
shape (No.2)
After
Adding the
chamfer
(No.1)
Q’ty
O O
- O
The shape (No.1) is
partly cut for securing
the gap from the metal
plate edge of No.2.
to the chamfer
edge (No.1)
Adding the
chamfer
(No.1)
lity
Remarks
*1
*2
(No.2)
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Page 5
Part No.
Old part
name
New part
name
Com
bi
p
ati-
Old New Old New
Service Bulletin Ref. No.
[Parts Change Information]
(Page.5/5)
PCI-0286 (B083)
<Date> March 17, 2011
<Change of the part name>
RADF-A2, SO-30, PF-430, PF-310, PF-750, PF-760/PF-760(B), DF-73, DF-75, DF-730,
DF-780/DF-780(B)
The following part names were changed for the part control reason. (The part numbers remain unchanged.)
5HL07110 BUSH-060
5HL08460 CLIP-4
5HL08360 KL-CLIP 6
5AA08360 BUSH-6P
5HL08410 TENSION ROLLER
BUSH060060MYU
CLIP040100G
CLIP060095F
METAL060060FC
ROL-TENSION-10-5
<Change of the tray lift motor (Change of the part name)
DF-470
The manufacturer of the tray lift motor (No.1) was changed for the part procurement reason.
Also, the part name was changed due to this change. (The part number remains unchanged.)
Part name: (Old) MOTOR:MOT-DU2421-1 --> (New) MOTOR:MOTOR,DC GEARED
Old Part
No.
1
*1: The part number remains unchanged.
"+" Mark at the head of the description indicates that it is a component part.
No.
305JS70240
5JS70240
New Part
No.
305JS70240
5JS70240
--> From the available timing in the March 2011 production>
Description
MOTOR:MOTOR,DC GEARED 1 1
Q’ty
lity
O O
Remarks
*1
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Loading...