Kyocera FS-C5150, FS-5250 SERVICEBULLETINS 2KV 0001 B085
Remai
ning numbers of drum refresh
will be
executed when resum
ed.
Check
SUM
Status
Date
Current
version
FS-C5250DN
Simplified Chinese
(
for
KTST)
Traditional Chinese
(
for
KMTW)
Subject
Service Bulletin Ref. No.
<Date> April 12, 2011
Firmware Upgrade (Main: Ver.002.005, Engine: Ver.003.003)
FS-C5150DN_FS-C5250DN_02.00.0010_(2011-01-27)
(Page.1/3)
2KV-0001 (B085)
Model
FS-C5150DN, FS-C5250DN
Topic
The firmware was upgraded as follows as the following contents were changed.
Content of Changes
No. Item Details
1 Language support
2 Garbled letters
3 Error with a certain PCL data
4 Change to the T7 toner
disposal control
5 Measure against the failure in
initial toner installation mode
Change of the toner disposal
6
at initial machine aging
New auto color registration
7
adjustment timing
Korean, traditional Chinese for Taiwan and simplified Chinese for
China are now supported.
Letters on the maintenance report might be garbled. Therefore, this
was corrected.
F24B error appeared when a certain PCL date was sent while
monochrome mode was set. Therefore, this was corrected.
T7 toner disposal control took too long until color calibration started if
the power was turned ON when the fusing temperature was 50 degree
C or more. Therefore, this was corrected.
The number of the initial drum on arrival is now recorded in the
EEPROM. The number is counted up at every drum refresh.
The number of toner disposal at drum refresh was changed from twice
to once in order to reduce amount of toner disposed at drum refresh.
Drum refresh, however, is executed twice while toner is not disposed in
the second time.
The amount of toner disposal was reduced to half while the aging time
remains unchanged.
The auto color registration adjustment is now performed at next print
job timing which is three hours or longer after the last print job.
CTL FW
511927
511351
511924
50735
TP-10-319,
Gem-025,
#162956
534719
534544
MAIN
MAIN
MAIN
ENGINE
ENGINE
ENGINE
ENGINE
For other changes, please refer to the next pages.
ENGINE
ENGINE
MAIN
Optional language
Optional language
Optional language
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade each kind of the firmware to the latest version at the same
time.
Program No.
2KT_1000003003 F732 003.003 2011/1/26 002.001 FS-C5150D
2KV_1000003003 19E4 003.003 2011/1/26 002.001 FS-C5250DN
2KV_3F00002005 - 002.005 2011/1/27 001.072
2KV_81KR001014 - 001.014 - -
2KV_81CN001012
2KV_81TW001012 - 001.012 - -
Ver.
- 001.012 - -
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
Remark
FS-C5150DN
Korean (for KMKR)
←←←← New Upgrade
←←←← New Upgrade
←←←← New Upgrade
←←←← New firmware
←←←← New firmware
←←←← New firmware
12
13
error with a
14
output size. Therefore, this
wa
s corrected.
15
v5.0.1930)
.
Therefore, this
wa
s corrected
16 Code39 barcode print failure with
Therefore, this
was corrected.
17
the certain file in duplex mode.
Therefore, this
was corrected
18
19
20
wa
s correct
ed.
21
Therefore, this
wa
s corrected.
22
data. T
herefore, this
wa
s corrected.
23
24
Service Bulletin Ref. No.
2KV-0001 (B085)
<Date> April 12, 2011
KMC’s Classification
Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the phenomena described above arise.
Serial Nos. of the Affected Machines: Planned from March 2011* production
(Page.2/3)
* The above is the plan at the present moment. Please note that this information is subject to change.
No. Item Details
8 DDNS registration error DDNS could not be registered in DHCP. Therefore, this was
corrected.
9 Measure against the Kerberos
authentication failure
Kerberos authentication from MFP might fail when the expiry date for
user account approaches. Therefore, this was corrected.
10 C/M/Y coverage error C/M/Y coverage did not become 0 with pure black data which is not
composite black. Therefore, this was corrected.
11 Hebrew message display error The second line of Hebrew message was displayed in reverse on
the operation panel. Therefore, this was corrected.
Logo mark area failure Logo mark area was filled with black when printing data with an
application named Formtastic. Therefore, this was corrected.
Measures against the
certain file
Garbled letters with a certain
CF248 error appeared with a certain user file. Therefore, this was
corrected.
Letters partially garbled with a certain CAD file depending on the
CAD file
Umlaut font failure with PDF data
The letters with Umlaut were partially not printed when printing PDF
data using Adobe Reader/Acrobat (9.2.0) + PCL-XL driver (KX
Code39 barcode was not correctly printed (printed as text).
a certain file
Image failure on backside
image with a certain file
The leading edge of image might be shifted or the image at the
center might be dropped out when printing the backside image of
CTL FW
501075
TC-10-038
526025
TC-10-037
#1126184
502226
TP-10-260
507471
TP-10-284
514779
514779
TP-10-296
KMA-D1011-12
521365
TP-10-321,
KMAUS10S23:
TP-080104,
#560940
TP-090355,
#858502
TP-10-198
#1079465
TP-090215
#735300
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
Undesired lines with a certain file
Print failure with the data
including a certain Prescribe
command
Prevention of the data dropping
out failure when outputting the
PS data
Print failure when printing a
certain file with KPDL(AUTO)
Failure with a certain PS data
PS error when printing a certain
data
TIF image failure when printing
the report data containing TIF
image
Undesired lines might be printed when continuously printing certain
two files. Therefore, this was corrected.
----------------------
The data at the left edge might be dropped out and the character
pitch might be broadened when outputting PS data. Therefore, this
A certain file might not be printed with KPDL (AUTO).
A part of image might not be printed when outputting a certain PS
PS error might appear and print job might be interrupted when
printing a certain data from UNIX. Therefore, this was corrected.
TIF image might be printed twice as large as the original size when
printing the report data containing TIF image. Therefore, this was
corrected.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
TP-090222,
#741300,
Claim #041
TP-090233,
5thplus#044,
TP-090331
ID_#404979
TP-090402,
5thPlus-#46,
TP-090381
ID_#409153
TP-10-061
KMA-D1003-10
TP-10-076
KMA-D1003-12
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
Loading...