Kyocera FS-C5150, FS-5250 SERVICEBULLETINS 2KT 0005 B174

Q’

Com

bi

p

ati-

COVER TOP P

(No.1)

A

Service Bulletin Ref. No.

2KT-0005 (B174)

<Date> June 21, 2011

Subject Preventive Measures against the Wire Pinching

(Page.1/1)

Model

FS-C5150DN, FS-C5250DN

Topic

The wire (EXIT-ENGN) was fixed by adding a clamp (ACCESS.CLAMP) in order to prevent it from being pinched by
the rib on the COVER TOP P. (Please refer to the service bulletin SB-2KT-0004-B120.)
This time, the following change was implemented as the permanent measures.

Content of Changes

1. A part of the rib on the COVER TOP P (No.1) where the wire used to be pinched was cut out.

2. The ACCESS.CLAMP (No.2) was abolished after the change 1 above.

No.

1

2

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure:

Please take good care not to pinch the wires when detaching and attaching the COVER TOP P.
Serial Nos. of the Affected Machines: Planned from the May 2011* production

302KV04010

2KV04010

7YZM390005++H01

YZ112220

ACCESS.CLAMP (No.2) disused

Old Part

No.

New Part

No.

302KV04011

2KV04011

- ACCESS CLAMP 1 - - -

*The above is the plan at the present moment. Please note that this information is subject to change.

Description

COVER TOP P 1 1 X O

In-Field modification by case No modification necessary

A: Rear side of the cover
Change of the rib on COVER TOP P

Old

Rib

New

Rib is cut out

ty

Old New Old New

lity

Remarks

Disuse

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.