Page 1
(Revised Issue 1) (Page 1/5)
Subject
Change of the LEVER INTERLOCK (Measures against the
Erroneous Display of REAR COVER Opening)
Model l:
FS-C5150DN, FS-C5250DN, FS-C2026MFP, FS-C2126MFP,
FS-C2026MFP+, FS-C2126MFP+, FS-C2526MFP, FS-C2626MFP
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measures: (-->)
Please replace the LEVER INTERLOCK with the new one (No.1) when the phenomenon described below
occurs.
(Note1) Please refer to another document [Procedure for replacing with the corrective parts] (File name is
“Procedure_D012_2KT_0019_E”) for the procedure how to replace the parts.
(Note2) Along with this replacement, the replacement of the other corrective parts in the related sections is
recommended. For more details, please refer to another Service Bulletin SB-2KT-0019-D012.
Serial Nos. of the Affected Machines: Please refer to (-->) the following pages.
Item Number
Description
Qty.
302KV02461
CAM TONER SUPPLY
4
302KV02501
RATCHET SHUTTER
4
302KV02542
HINGE LID R
1
302KV02E50
CASE SPACER
4
302KV02532
HINGE LID L
1
302KT09111
STOPPER HOOK
1
302KT09170
SPRING STOPPER HOOK
1
302KV02170
GUIDE TOP L
1
302KV02521
LEVER INTERLOCK
1
302KW34040
LABEL SET ISU
1
Service Bulletin Ref. No. 2KT-0015 (C238)
<Date> Feb. 8, 2013
This time, the description with (-->) was revised from the previous information.
<Number of changes: 5> The content according to supply of the countermeasure parts was added and revised.
To be informed:
To several issues, we have created a modification kit containing the parts in the <Table.2>.
The Item code of each modification kit is described in the <Table.3>. (Each country has a different item code!)
All latest hardware updates since January are implemented in this kit.
For more details, please refer to the Service Bulletin SB-2KT-0019-D012.
We do not recommend ordering the modification kit in every case, but the price for the kit will be lower than the
parts ordered separately ,which makes the purchase more convenient.
<Table.2> Contents of the modification kit (The yellow marked part is described in this Bulletin.)
The link of the replacement procedure was added.
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
Page 2
(Revised Issue 1) (Page 2/5)
Material Number
in SAP
Material
Number
in AS-400
Material Description
870LCKIT2KV1AT
GEMINI MODIFICATION KIT FOR AUSTRIA
870LCKIT2KV1BE
302KV1BE
GEMINI MODIFICATION KIT FOR BELGIUM
870LCKIT2KV1CH
302KV1CH
GEMINI MODIFICATION KIT FOR SWITZERLAND
870LCKIT2KV1DE
GEMINI MODIFICATION KIT FOR GERMANY
870LCKIT2KV1DK
GEMINI MODIFICATION KIT FOR DENMARK
870LCKIT2KV1ES
GEMINI MODIFICATION KIT FOR SPAIN
870LCKIT2KV1FI
GEMINI MODIFICATION KIT FOR FINLAND
870LCKIT2KV1FR
GEMINI MODIFICATION KIT FOR FRANCE
870LCKIT2KV1GB
GEMINI MODIFICATION KIT FOR UNITED KINGD
870LCKIT2KV1IT
GEMINI MODIFICATION KIT FOR ITALY
870LCKIT2KV1NL
302KV1NL
GEMINI MODIFICATION KIT FOR NETHERLANDS
870LCKIT2KV1NO
GEMINI MODIFICATION KIT FOR NORWAY
870LCKIT2KV1PT
302KV1PT
GEMINI MODIFICATION KIT FOR PORTUGAL
870LCKIT2KV1SE
GEMINI MODIFICATION KIT FOR SWEDEN
870LCKIT2KV1ZA
302KV1ZA
GEMINI MODIFICATION KIT FOR SOUTH AFRICA
870LCKIT2KV1RU
302KV1RU
GEMINI MODIFICATION KIT FOR RUSSIA
870LCKIT2KV100
GEMINI MODIFICATION KIT FOR INT. SALES
870LCKIT2KV130
GEMINI MODIFICATION KIT FOR OLIVETTI
870LCKIT2KV120
GEMINI MODIFICATION KIT FOR TA GmbH
Service Bulletin Ref. No. 2KT-0015 (C238)
<Table.3> Item code of the modification kit
<Date> Feb. 8, 2013
Customer Services & Support Division (CSSD)
KYOCERA Document Solutions Europe
Page 3
(Revised Issue 1) (Page 3/5)
Subject
Change of the LEVER INTERLOCK (Measures against the
Erroneous Display of REAR COVER Opening)
LEVER INTERLOCK
Protrusion of
REAR COVER
Fulcrum for rotating LEVER
Detection switch to open/
close of the REAR COVER
(-->)(7SM010104+++H01/ SM055200)
Rack sliding when opening/closing the TOP COVER
B
A
X
Service Bulletin Ref. No. 2KT-0015 (C238)
<Date> Feb. 8, 2013
Topic
In a rare case, the message “The cover is opened” is displayed due to misdetection of the REAR COVER opening
when slowly closing the TOP COVER while REAR COVER was closed. Therefore, the shape of the LEVER
INTERLOCK was partly changed in order to improve its switching motion of the detection switch for the REAR
COVER opening/closing.
Content of Changes
Depending on the location (X in the figure below) of the rear edge (A) of the LEVER INTERLOCK against the
protrusion of the REAR COVER and how to close the TOP COVER, the rear edge (A) might slip under the
protrusion of the REAR COVER. As a result, the front side (B) cannot press down the detection switch for the
REAR COVER opening/closing due to the upward rotation failure of the LEVER.
Therefore, the rib was added to the rear edge (A) of the LEVER in order to secure the margin for the inroad.
(The photo below shows the rear of the
main unit viewed from the right side.)
(-->)
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
Page 4
(Revised Issue 1) (Page 4/5)
No.
Old Part
No.
New Part
No.
Description
Q’
ty
Com
bi
patility
Remarks
Old
New
Old
New
1
------------
302KV02521
2KV02521
LEVER INTERLOCK
-
1
-
O
Note 3
Rib
added
(X)
(X)
If the rear edge (A) of LEVER slips under the
protrusion of REAR COVER, the front edge (B)
of LEVER does not press down the detection
switch due to the rotation failure and “The
cover is opened” is mistakenly displayed.
The front edge (B) of LEVER can press down the
detection switch by the normal rotation of LEVER
INTERLOCK with the rib.
The detection switch is turned ON (REAR COVER
CLOSE detection) when the rack connecting with
TOP COVER slides to press down the front edge (B)
of LEVER.
At this time, the rear edge (A) is normally rotated
upwards and is located higher than the protrusion.
However, in a rare case, the rear edge (A) may slip
under the protrusion, and the detection switch is
turned OFF (REAR COVER OPEN detection) since
the front edge (B) cannot press down the detection
switch.
Service Bulletin Ref. No. 2KT-0015 (C238)
<Date> Feb. 8, 2013
<Shape change of the LEVER INTERLOCK*>
(Below is the machine rear edge (A).)
(Old) (New)
(-->)
(-->)
(Note 3) The part was newly registered as service part.
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
Page 5
(Revised Issue 1) (Page 5/5)
Model
Product Code
Destination
Serial No.
1102KT3NL0
KDE
Q522737898
FS-C5150DN
1102KT3UT0
UTAX/TA
Q862802762
1102KT3LV0
Olivetti
NHT2800756
1102KV3NL0
KDE
Q562732210
FS-C5250DN
1102KV3UT0
UTAX/TA
Q872704356
1102KV3LV0
Olivetti
NHU2800554
FS-C2026MFP
All destination
All destinations
No production
FS-C2126MFP
All destination
All destinations
No production
1102M83NL0
KDE
NML2801548
FS-C2526MFP
1102M83LV0
UTAX/TA
NNU2800293
1102M99JP0
Olivetti
Next production
1102M93AS0
KDE
NN12705043
FS-C2626MFP
1102M93LV0
UTAX/TA
NNV2701498
1102M92AD0
Olivetti
Next
Model
Product Code
Destination
Serial No.
1102MA3NL0
KDE
NN52805586
FS-C2026MFP+
1102MA3UT0
UTAX/TA
NNW2801001
1102MA3LV0
Olivetti
NQB2800327
1102MB3NL0
KDE
NN92815235
FS-C2126MFP+
1102MB3LV0
Olivetti
NQC2800699
1102MB3UT0
UTAX/TA
NNX2804199
Service Bulletin Ref. No. 2KT-0015 (C238)
<Date> Feb. 8, 2013
Serial Nos. of the Affected Machines
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
Loading...