Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 006
Service Bulletin
SB Number:
Subject:
SB 2K3-006
Image blur at the rear edge when copying
Creation Date: 22/06/2011
Model: FS-6025MFP/6025MFP(B)/6030MFP
Phenomenon In case 11 X 17 inch / 27,94 cm X 43,18 cm sized originals are placed on the contact glass
and copied, the image may appear slightly blurred with a 10mm X 10mm range from the rear
edge.
Cause When scanning the original, the bottom of the Wire alignment holder in the rst mirror frame
of the scanner, contacts the upper side of the optical wire pulley and the rst mirror frame
may vibrate vertically together with the light path.
Previous solution 1. The wire alignment ribs of the wire alignment holder (Guide FFC LED C) have been cut to
avoid contact with the optical wire pulley.
2. Due to the above mentioned change, the Sheet FFC LED has been added to press the
FFC main LED lamp down.
Current solution 1. The shape of the Sheet FFC LED has been changed, to improve the measure against the
blurred image on the copy.
2. Due to the above mentioned change, the shape of the wire alignment holder (Guide FFC
LED C) has been changed.
Optical section
Guide FFC LED C and Sheet FFC LED
Old condition (Viewed from the
bottom of the optical section)
Guide FFC LED C
Sheet FFC LED
New condition
Guide FFC LED C
Carriage wire pulley
Sheet FFC LED
Fold of the Sheet FFC LED
KMIS Service Department, Kyocera Mita Europe B030-B097 / SB 2K3-006
Page 1 of 3
Parts
Service Bulletin
No. Old Parts
No.
1 302K317171
2K317171
2 302K317790
2K317790
Classication
Field measure When the above mentioned phenomenon occurs, please replace the Guide FFC LED C and the
Serial numbers of affected machines
Type Serial number
FS-6025MFP/6025MFP(B)/6030MFP March 2011 production
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Old condition: Guide FFC LED C New condition: Guide FFC LED C
New Parts
No.
302K317172
2K317172
302K317791
2K317791
Entire stock rework
Sheet FFC LED with the latest type.
Description Q’TY Interchange-
GUIDE FFC LED C 1 1 X X
SHEET FFC LED 1 1 X X
In-eld modication at next visit
In-eld modication by case
X
ability
Old New Old New
No modication necessary
The ribs have been cut to hold the old
Sheet FFC LED (302K317790)
Viewed from above
The ribs have been cut to align the FFC and
to t the old Sheet FFC LED (302K317790)
KMIS Service Department, Kyocera Mita Europe B030-B097 / SB 2K3-006
Page 2 of 3
The shape has been changed to hold the
new Sheet FFC LED (302K317791)
Viewed from above
The ribs have been added to hold the new
Sheet FFC LED (302K317791)
Loading...