Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 0004 B031 1

Q’

Com

ati-

The

Serial Number

s of the

Affected Mac

hine w

ere added.

ccess

Subject

(Revised Issue 1)

Service Bulletin Ref. No.

<Date> August 3, 2011

2K3-0004 (B031)

Change of the LVU Main PWB (Disuse of the AC-CUT Unit)

--- For 220V-240V only

(Page.1/4)

Model

This time, the description with (-->) was revised from the previous information.

FS-6025MFP, FS-6025MFP/B, FS-6030MFP

Topic

The PARTS LVU MAIN 200 SP (No.1) was changed as follows for part procurement ease. Accordingly, some attention is required when replacing the parts. Please refer to [Field Measure] below.

Content of Changes

1) Change of the LVU main PWB i) The discharger IC was added.

ii) The capacitor (YC10) to supply the power to the AC-cut was changed to a jumper. iii) The constant of the discharger resistor was changed and the discharger resistor was abolished.

2) The AC-CUT unit, 3 pcs. of the access saddles and 2 pcs. of the cables were abolished that became

unnecessary due to the changes above.

saddles (x3) abolished

Cable to connect the AC-CUT unit with the LVU main PWB abolished

No.

302K394120

Cable to connect the AC-CUT unit with the main PWB abolished.

AC-CUT unit abolished

Old Part

No.

2K394120

LVU main PWB

New Part

No.

302K394121

2K394121

[Disuse of the cables]

the main PWB (YC106))

Abolished

A: To the machine

rear side

Description

PARTS LVU MAIN 200 SP 1 1

Old New Old New

lity

X O

(Connecting sections with

Main PWB

: From the machine

inside

Machine rear side

Remarks

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

From Next Production

Service Bulletin Ref. No.

(Revised Issue 1)

(Page.2/4)

2K3-0004 (B031)

<Date> August 3, 2011

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure:

Please replace the PARTS LVU MAIN 200 SP (No.1) with the new one when replacing the part in the machine on which the new LVU main PWB is installed. For the machine with the old LVU main PWB, either new or old PARTS LVU MAIN 200 SP (No.1) is applicable. However, if replacing it with the new No.1, please remove the AC-CUT unit, the access saddles (x3) and the cables (x2). (*) Please refer to the next page how to distinct between the new and old LVU main PWB and the procedures

for detaching/refitting the cover when replacing the LVU main PWB.

Serial Nos. of the Affected Machines: Please refer to the table below.

(-->) Serial Nos. of the Affected Machines

TASKalfa305/FS-6030MFP 220-240V

KME 220VM KMAUS 220VM UTAX 220VM KMHG 220VM KMID 220VM KMSG 220VM KMTH 220VM 1102K33NL0 1102K33AS0 1102K33UT0 1102K33HK0 1102K33ND0 1102K33SG0 1102K33TH0 Q6R1301780 Q6S1300123 N6C1300471 N931400021 N941300015 N951300030 N961300061

KMKR 220VM Olivetti Philcopy 220VI 1102K33KR0 1102K33LV0 1102K34PH0 N9R1300401 NCY1300067 NM9 *1

TASKalfa255/FS-6025MFP 220-240V

KME 220VM UTAX 220VM Olivetti RYAD 220VM KMA 220VI KMAUS KMID 220VM 1102L33NL0 1102L33UT0 1102L33LV0 1102L33RY0 1102L34US0 1102L33AS0 1102L33ND0 N691303738 N6B1300981 ND31300145 NM3 *1 N7U1400103 N6A1300152 N991300036

KMSG 220VM KMTH 220VM KTST 220VM KMHG 220VM KMKR 220VM Philcopy 1102L33SG0 1102L33TH0 1102L33KS0 1102L33HK0 1102L33KR0 1102L34PH0 N9B1300043 N9D1300061 NDL1300001 N971300030 N9T1400511 NMB *1

TASKalfa255b/FS-6025MFP/B 220-240V

KME 220VM UTAX 220VM KMA 220VI KMAUS KMID 220VM KMSG 220VM KMTH 220VM 1102L33NL1 1102L33UT1 1102L34US1 1102L33AS1 1102L33ND2 1102L33SG1 1102L33TH1 N771400544 N781300147 N7W *1 N76 *1 N9A1500011 N9C *1 N9E *1

KTST 220VM KMHG 220VM Philcopy 220VI 1102L33KS1 1102L33HK1 1102L34PH1 NG91300001 N98 *1 NMC *1

[How to distinct between the new and old LVU main PWB]

<LABEL> Old LVU main PWB : 302K3****0(<--Last digit is "0") New LVU main PWB: 302K3****1(<--Last digit is "1")

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

+ 2 hidden pages