Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 0036 C210 1
(Revised Issue 1) (Page.1/3)
Subject
Firmware Upgrade (Upgrade Pack Ver. V6.00)
FS-6025MFP_FS-6030MFP_v06.00.0010_(2012-07-04)
FS-C8020MFP_FS-C8025MFP_v06.00.0010_(2012-07-04)
Model l:
FS-6030MFP, FS-6025MFP, FS-6025MFP/B
Type
Program No.
VER.
Remarks
Upgrade Pack Ver.
2K3_V6.00E
6.00
MAIN
2K3_2F00.005.020
->2K3_2F00.006.004
006.004
New upgrade
MMI
2K3_7000.005.016
005.016
ENGINE
2K3_1000.008.012
008.012
New upgrade
LANGUAGE BR
2K3_81BR.001.012
001.012
LANGUAGE KR
2K3_81KR.001.010
001.010
For KDKR *1
LANGUAGE CN
2K3_81CN.001.011
001.011
For KDCN *1
LANGUAGE TW
2K3_81TW.001.009
001.009
For KDTW *1
IO
2K3_1E00.001.010
001.010
DP
3M8_9500.005.001
005.001
New upgrade
FAX BOOT/APL
<Deleted from the pack
for the main machine>
Refer to the enhance pack. *2
New upgrade
FAX BOOT/APL
<Deleted from the pack
for the main machine>
Refer to the enhance pack. *2
New upgrade
ESPECIAL
ES_SKIP.ON
----------
Service Bulletin Ref. No. 2K3-0036 (C210)
<Date> August 22, 2012
This time, the description with (-->) was revised from the previous information.
<Number of changes: 1> Translation was corrected.
Topic
The firmware was upgraded as follows.
Content of Changes
1. Measures against the F356 error
2. Handling of the setting [Send and Forward]
3. Measures against the F515 error
4. Measures against the margin operation failure
5. Measures against the F248 error when using the web driver
6. Correction to German translation
7. Measures against the F124 error when scanning
8. Change of the initial setting of U248 [Setting service status page] for UTAX/TA only
9. Change of the elapse time to enter the drum refresh mode
10. Display change of the black line cleaning guidance
11. Measures against the C1030 service call error [PF lift motor 2 error]
<For more details, please refer to next pages.>
For the KD sales companies, it is possible to download the firmware at the download center on the Service World.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware (MAIN, ENGINE, MMI) to the
latest version at the same time.
*1: This firmware is not included in the upgrade pack. Please individually download it at the download center.
*2: The upgrade pack for the enhancement unit has been informed by the service bulletin SB-2K3-0035-C199 which is the
latest one as of August 8, 2012. However, please check the latest service bulletin since the upgrade pack version may be
upgraded again. (It will be informed per as 2K3-****.)
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
(Revised Issue 1) (Page.2/3)
KDC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the phenomenon described above occurs.
Serial Nos. of the Affected Machines: From the July 2012 production
No.
Item
Details
CTL
MAIN firmware ver.005.020
Change at production line
The command for checking the board was changed in order to improve the
productivity.
639435
MAIN firmware ver.006.004
1
Measures against the F356
error
The F356 system error might appear after completing transmission of network
fax with simultaneous print function from the network user. Therefore, this was
corrected.
634157
2
Handling of the setting [Send
and forward]
The destination of [Send and Forward] might be indicated on the status of
transmission job when [Send and Forward] was set. Therefore, this was
corrected so that they will not be indicated.
624974
662105
3
Measures against the F515
error
The F515 system error might appear if the start key was pressed
immediately after setting the A3 size original on the DP when the combine 4
in 1 and A5 size paper were selected. Therefore, this was corrected.
(This error appears when misalignment occurs depending on the detection
timing of original size.)
589400
4
Measures against the "Margin"
operation failure
"Margin" in copy function did not function if "Auto Image Rotation" was set to
"OFF". Therefore, this was corrected.
TO-11-092
616408
5
Measures against the F248
error when using the web
driver
The F248 error might appear when performing a print job after setting the
machine not by the auto recognition of the installing model, but by inputting
the IP address using the web driver (UPD: Universal Printing Driver).
Therefore, this was corrected.
TP-11-040
KMA-
CID472368
6
Correction to German
translation
The following strings in German were corrected.
- (Wrong) "Install" --> (Correct) "Installiert"
- (Wrong) "Keine Anwort" --> (Correct) "Keine Antwort"
TO-12-046
TA-S12-018
- (Wrong) "Universalzuführ" --> (Correct) "Universalzufuhr"
- (Wrong) "Prüfen" --> (Correct) "Qualität"
- (Wrong) "Druckvorgang läuft" --> (Correct) "Drucken"
TO-12-036
640194
640170
7
Measures against the F124
error when scanning
The F124 system error might appear during original scanning if pressing the
start key from the sending screen after calling up the function from the
registered program. Therefore, this was corrected.
595198
593457
8
Change of the initial setting in
the U285 [Setting service
status page] for TA/UTAX only
The initial setting of the maintenance mode U285 was changed from “OFF”
to “ON” which had been done only for TA/UTAX. The print coverage will be
indicated on the service status page by setting U285 ON.
661227
Engine firmware
Service Bulletin Ref. No. 2K3-0036 (C210)
<Date> August 22, 2012
Content of Changes
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
Loading...