Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 019

Service Bulletin

SB Number:

Subject:

SB 2K3-019

Paper jam J9000 when aligning Paper stack on the DP cover

Creation Date: 29/03/2012

Model: FS-6025MFP/6025MFP(B)/6030MFP, FS-C8020MFP/8025MFP

Contents

Paper jam J9000 (No original feed) may occur, when aligning a Paper stack on the DP cover. Therefore it is
recommended to avoid this.

When aligning a Paper stack (Originals) on the DP cover, the Pick-up holder may drop and the
Stopper may disenage from the Limiter due to the impact.

Stopper is normally regulated by
the Rib (Marked in red).

When set normally

Stopper

When setting the Originals under this condition, the Stack of originals enter to far and the
stopper causes Paper jam J9000.

When set abnormally

Pick-up holder
gradually drops
due to the impact.

Original stack

Stopper load results in the Paper jam.

Original stack

Stopper is dislocated beyond the Limiter.

KMIS Service Department, Kyocera Mita Europe C058 / SB 2K3-019

Page 1 of 1