Kyocera FS-1030MFP, FS-1035MFP, FS-1130, FS-1135 Service Bulletin 2MH 001

Service Bulletin

SB Number:

Subject:

SB 2MH-001

Engine rmware upgrade information

Creation Date: 06/12/2011

Model: FS-1030MFP/1130MFP/1035MFP/1135MFP

Contents

Please restart the machine by completely disconnecting and reconnecting the Power cord after upgrading

the Engine rmware.

1. Engine Firmware

The LCD display remains powered and the power is not turned OFF, when pressing the power switch after
Upgrading the Engine rmware. Therefore, it is necessary to disconnect and reconnect the power cord in
order to turn the power OFF and ON. After reconnecting the power cord, the machine starts up and the LCD is
powered. After this, the machine should reach the [Ready] state.

2. Other Firmware
The procedure has not been changed.
Please turn the power OFF and ON after upgrading the Firmware.

KMIS Service Department, Kyocera Mita Europe B413 / SB 2MH-001

Page 1 of 1