Kyocera DF-600 Service Bulletin AS 116

Service Bulletin

1 / 2

SB Number:
Subject:

Model:

Please be informed that in principal the DF-600 finisher is designed for the KM-4530 and the DF-610
finisher is suitable for the KM-4530, KM-5530 and KM-6330.

However, based on field requests, it has now become possible as a local solution, to use the DF-600 also
on the KM-5530 and KM-6330. This is only possible in combination with a certain machine firmware level,

and after making the adjustments as described later in this Service Bulletin.
Please mind however that the DF-600 + KM-5530 or KM-6330 combination, is not a standard configuration

and therefore does have the following limitations.

IMPORTANT LIMITATIONS OF CONFIGURATION DF-600 WITH KM-5530 / 6330

)

1. Printing functions (punch and booklet) cannot be used. => the driver has not been adjusted to the
DF-600 => the driver for the DF-610 should be used and although these printing options (punch &
booklet) can be selected from this driver, they are in fact not effective for the DF-600.

SB AS-116

Creation Date:

Usage of DF-600 on KM-5530 and KM-6330

DF-600 (KM-4530 / 5530 / 6330)

25/02/2003

2. Compared to the DF-610, the productivity / speed will go down.

3. The User manual / Operation Guide for the KM-4530 / 5530 / 6330 or DF-600 or any other related

documentation will not be updated in compliance with this local solution.

I. PROCEDURE DF-600 ON KM-5530

DF-600 setting

Please perform following procedure on the KM-5530:

n

Enter following simulation no. on the operation panel: 93057855
Enter simulation mode U939 and set from ‘Normal’ —> to ‘600’

o

ROM version and machine serial number
The above simulation no. is available from the following ROM version and later.

MAIN: 2BC2955AM
MMI1: 2BC1956AM
MMI2: 2BC2961AM

The above ROM version is included from following KM-5530 machine serial number:

KM-5530: D3005923 and higher

KMIS Service Team, Kyocera Mita Europe

N.A. / SB AS-116

Service Bulletin

II. PROCEDURE DF-600 ON KM-6330

DF-600 setting

Please perform following procedure on the KM-6330:

Enter following simulation no. on the operation panel: 93057855

n

Enter simulation mode U939 and set from ‘Normal’ —> to ‘600’

o

ROM version and machine serial number
The above simulation no. is available from the following ROM version and later.

MAIN: 2CJ29049K
MMI: 2CJ29058J

The above ROM version is included from following KM-6330 machine serial number:

2 / 2

KM-6330: Z3002429 and higher

KMIS Service Team, Kyocera Mita Europe

N.A. / SB AS-117