Kyocera DF-600 Service Bulletin DF 063

Service Bulletin

SB Number:

Subject:

SB DF-063

Note when replacing staple unit

Creation Date: 12/06/2008

Model: DF-600/610/650

Affected models: DF-600/610: KM-4530/5530/6330/7530, KM-C2630/2630D
DF-650: KM-6030/8030

Contents 1. Replace the stapler and staple clincher at the same time, since

the performance can not be guarantied if only one of the two is replaced.
Therefore both parts can only be ordered as a set (3B827020).

2. A special “jig” tool is necessary to replace the staple units.

Stapler (Driving staple section)

Staple clincher (Bending of staple section)

Lower mount stapler
303B807030

Parts No. Parts No. Description Contents Remarks

1 3B827020 STAPLE UNIT STAPLER

2 3B868010 STAPLER ADJUSTMENT TOOL

3 303H368040 CARTRIDGE ADJUSTMENT TOOL DF-650 ONLY

Classication

Field measure Replace the stapler and the staple clincher at the same time.

Entire stock rework

See page 1-5-21 of the service manual for the stapler adjustment procedure.

Stapler

In-eld modication at next visit

Upper mount stapler
303B807350

STAPLE CLINCHER

In-eld modication by case

Staple
clincher

No modication necessary

X

KMIS Service Department, Kyocera Mita Europe 8358 / SB DF-063

Page 1 of 1