Kyocera DF-600 Service Bulletin AS 113

1 / 2

SB Number:

SB AS-113 Issue Date: 31/01/2003

Service Bulletin

Subject: Change of ‘Main PCB Ass’y’
Model:

Up till now, the ‘MAIN PCB ASS’Y’ that is used both in the DF-600 and the DF-610, was identical.
Please be informed however that as of September 2002 production, an exclusive ‘Main PCB Ass’y’

DF-600

but unnecessary for the DF-600 have been removed). Based on this change, please pay extra careful
attention to the following points when replacing the Main PCB Ass’y in the Df-600 and Df-610.

has been newly established (on this exclusive PCB for DF-600, parts that are needed for the DF-610,

DF-600 / 610 (finishers for KM-4530 / 5530)

DF-610 => please use the ‘old’ (current) ‘MAIN PCB ASS’Y’. P/N: 3B801015
DF-600 => both old (current one) and the new ‘MAIN PCB ASS’Y’ can be used !

P/N: 3B801015 and 3B901010

Important Attention Point

The DIP switch setting between the old and new, exclusive PCB for DF-600 is different.
Please adjust the DIP switch accordingly! See below.

DIP switch

z White line rectangular sections = connectors and parts unnecessary for DF-600.
The ‘old’ and new PCB can be distinguished from one another via the silk printed number on section A:

OLD ‘MAIN PCB’ for DF-610 / 600 = 3B82801
NEW, exclusive ‘MAIN PCB’ for DF-600 = 3B901010

OLD ‘MAIN PCB’ for DF-610 / 600 (3B801015):

DF-610: DIP SW4 OFF

NEW, exclusive ‘MAIN PCB’ for DF-600 (3B901010):

DF-600: DIP SW4 ON

Fig. 1. ‘old’, current ‘MAIN PCB’ for DF-610/600.

MAIN PCB

A

Shift this DIP switch.

for the

KMIS Service Team, Kyocera Mita Europe 5613 / SB AS-113

Parts Table

No.

Part No.

OLD

1

3B801015 3B901010 MAIN PCB ASS'Y 1 1 O O

Part No.

NEW

Service Bulletin

Description

Q’ty

old-new

Interchange-

ability

2 / 2

KMIS Service Team, Kyocera Mita Europe 5613 / SB AS-113