Kraus KHU10032165041CH, KBU22E165042CH, KHU32165041CH, KBU14E165042CH, KHF20030165041CH User Manual
...
INSTALLATION GUIDE
Nola™ Single Lever Commercial
Style Kitchen Faucet
KPF-1650
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.
1
Prior to Installation:
•Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement
•Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone
•Place bucket under angle stops. Turn on to flush any debris prior to installing new plumbing. Shut off angle stops
•Pre-drilled hole size requirement: 1-3/8”
•Max countertop thickness without deck plate: 1-3/8”
•1, 2, or 3 hole installation
Tools you will need
|
|
|
|
|
|
|
Adjustable Wrench |
|
Bucket |
|
Phillips Screwdriver |
|
Safety Goggles |
|
|
|
|
|
|
|
2
Diagram and Parts List
E
A
F
G
B |
|
D |
H |
C1 |
I |
|
|
C2 |
|
C3 |
|
A. Spray Head |
E. Hot & Cold Waterlines |
B. Faucet Body |
F. Aerator Key |
C. Mounting Hardware |
G. Faucet Extender (used for top |
C1. Rubber & Metal Washer |
mount sinks only) |
C2. Mounting Nut |
H. 2.5 mm Hex Wrench |
C3. Mounting Screw |
I. Deck Plate Assembly |
D. Metal Base Ring |
|
3
Faucet Dimensions
7.2”7 3/16” |
(183mm) |
8 11/16” |
|
90º |
|
|
|
8.66” |
|
|
(220mm) |
35MAX
360º
Ø35
35MAX
26.2”26 3/16” |
(665mm) |
Ø54
Ø35
4
Loading...