INSTALLATION GUIDE
Handmade Stainless Steel
Undermount Kitchen Sink
KHU100-30 / KHU100-32 / KHU101-23 / KHU102-33 / KHU103-33 / KHU104-33 / KHU105-32 / KHU121-23 / KHU122-23 / KHU123-32
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.
1
Prior to Installation:
•Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement
•Inspect the sink prior to installation to make sure that it has not been damaged or during shipping
•Use the cut-out template provided by Kraus
•Observe all plumbing and building codes according to your state requirements
•Not recommended to be installed with laminate countertop
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.
2
Tools you will need:
|
Safety Goggles |
|
Drill |
|
Silicone Adhesive |
|
Jig Saw |
|
Scissors |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Phillips Screwdriver |
|
Putty Knife |
|
Tape Measure |
|
Pencil |
|
Screwdriver |
|
|
|
|
|
|
|
|
|
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite
Parts List
• Cut-Out Template • Mounting Hardware • Bottom Grids |
• Drain |
3
Dimensions
16” |
|
406mm |
18” |
457mm |
|
||||
|
|
|
|
|
|
|
|
|
|
28”
711mm
30”
762mm
10” 254mm
KHU100-30 30” x 18” x 10”
Min Cabinet Size: 33” Matching Grid: KBG-100-30 Drain Model #: BST-1
16” |
|
406mm |
18” |
457mm |
|
||||
|
|
|
|
|
|
|
|
|
|
21”
533mm
23”
584mm
10” 254mm
KHU101-23 23” x 18” x 10”
Min Cabinet Size: 27” Matching Grid: KBG-101-23 Drain Model #: BST-1
17” |
432mm |
19” |
|
|
|
30”
762mm
32”
813mm
10” 254mm
KHU100-32 32” x 19” x 10”
Min Cabinet Size: 36” Matching Grid: KBG-100-32 Drain Model #: BST-1
17” |
|
432mm |
19” |
483mm |
|
||||
|
|
|
|
|
|
|
|
|
|
|
14-7/8” |
14-7/8” |
|
|
378mm |
378mm |
|
|
|
32-3/4” |
|
|
|
832mm |
|
10” |
254mm |
10” |
254mm |
KHU102-33
32 3/4” x 19” x 10” Min Cabinet Size: 36”
Matching Grid: KBG-102-33-1 and KBG-102-33-2
Drain Model #: BST-1 & ST-1
4