Kraus KGD442, KGD441BLACK, KGD441GREY, KGD441BROWN, KGD442BLACK User Manual
...
INSTALLATION GUIDE
Granite Kitchen Sinks
KGD-410 / KGD-412/ KGU-413 / KGD-430 / KGD-433 / KGU-431 / KGU-413 / KGU-434 / KGD-441 / KGD-442
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. December 26, 2017
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.
1
Please note:
•
•
KGUs can be installed undermount only (Option B)
KGDs can be installed topmount & undermount (Option A)
Prior to Installation:
•Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement
•Inspect the sink prior to installation to make sure that it has not been damaged or during shipping
•Use the cut-out template provided by Kraus
•Observe all plumbing and building codes according to your state requirements
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.
2
Tools and Required Materials
|
Safety Goggles |
|
Drill |
|
Silicone Adhesive |
|
Jig Saw |
|
Pencil |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hammer |
|
Hole Saw |
|
Masking Tape |
|
Tape Measure |
|
Screwdriver |
|
|
|
|
|
|
|
|
|
NOTE: Specialized tools may be necessary to install Kraus Granite sinks with countertop materials other than wood, marble, or granite
Parts List
• Cut-Out Template • Mounting Hardware • Drain
NOTE: Parts lists may also vary depending on model
3
Hardware (included)
Kit for Drop-In Installation |
Kit for Undermount Installation |
Important
•Instructions may vary depending on countertop material. Read all instructions carefully, and ensure that counters are compatible with sink installation before proceeding.
•Follow the plumber’s code and builder’s code effective in your area.
•Shut off water valves prior to installation.
•Open sink packaging and verify that the sink is in perfect condition. Put sink back into packaging to protect it until time of installation.
•To replace an existing sink, make sure that the cut-out hole in the counter is of an adequate size to fit the new sink.
4
Dimensions
|
|
|
30-3/4” |
|
|
24” |
780mm |
|
|
610mm |
|
18 |
460mm |
394mm |
-201/8” 510mm 1/2-14” 370mm |
” |
|
” |
|
1/8 |
|
1/2 |
|
- |
|
- |
|
|
|
15 |
|
|
|
21-3/8” |
28-3/8” |
|
|
544mm |
|
|
|
720mm |
|
|
|
8-1/4” 209mm |
8-5/8” 220mm |
KGD-410
24” x 18 1/8” x 8 1/4” Min Cabinet Size: 27” Drain Model #: BST-2
30-1/2”
774mm
-14 17”1/2 434mm”370mm
28-3/8”
720mm
7/8-8 ”220mm
KGD-412
30 3/4”x 20 1/8”x 8 5/8” Min Cabinet Size: 33” Drain Model #: BST-2
|
32-1/2” |
|
824mm |
18-7/8" 481mm 16-3/8” 415mm |
|
14-1/4” |
14-1/4” |
362mm |
362mm |
9-1/2” 241mm |
|
KGU-413
30 1/2” x 17” x 8 7/8” Min Cabinet Size: 33”
Drain Model #: BST-2 & ST-2
|
|
32-1/2” |
|
|
824mm |
19-7/8” 505mm |
17-3/4” 435mm |
|
|
16” |
12-1/2” |
|
407mm |
316mm |
|
9-1/2” 241mm |
|
KGU-434
32 1/2” x 18 7/8” x 9 1/2” Min Cabinet Size: 36” Drain Model #: BST-2
|
|
|
25” |
|
|
|
635mm |
22” |
559mm |
18” |
456mm |
|
|
|
21-1/2” |
|
|
|
544mm |
9-1/2” 242mm |
|
||
KGU-431 |
KGD-441 |
32 1/2” x 19 7/8” x 9 1/2” |
25” x 22” x 9 1/2” |
Min Cabinet Size: 36” |
Min Cabinet Size: 27” |
Drain Model #: BST-2 & ST-2 |
|
|
33” |
|
838mm |
22” 559mm 16.-3/8” 415mm |
|
14-1/4” |
14-1/4” |
362mm |
362mm |
9-1/2” 241mm |
|
KGD-433
33” x 22” x 9 1/2” Min Cabinet Size: 36”
Drain Model #: BST-2 & ST-2
|
33” |
|
838mm |
22” 559mm 17-3/4” 435mm |
|
16” |
12-1/2” |
407mm |
316mm |
9-1/2” 241mm |
|
KGD-430
33” x 22” x 9 1/2” Min Cabinet Size: 36”
Drain Model #: BST-2 & ST-2
33”
838mm
22” 559mm 18” 435mm
|
29-1/2” |
|
748mm |
10-3/4” 271mm |
8-1/4” 208mm |
KGD-442
33” x 22” x 10 3/4” Min Cabinet Size: 36”
5
Loading...