Konica 7920 Wiring Diagram 7920fv2e
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
SWITCHES ON PWBs,
TECH. REP. SETTINGS
17196
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
CONTENTS
1. CONTROL PANEL KEYS AND TOUCH PANEL .............................................S-1
1-1. Control Panel Keys ..................................................................................S-1
1-2. Explanation of the Touch Panel .............................................................. .S-3
(1) Basic Screen ...................................................................................S-3
(2) Warning Screens .............................................................................S-4
2. FUNCTION OF SWITCHES AND OTHER PARTS ON PWBs ........................S-6
2-1. PWB Location ..........................................................................................S-6
2-2. PWB-H (MSC Board) ........... ............. ......................... ......................... .....S-6
2-3. PWB-T (Tech. Rep. Setting Switches Board) ................................. .........S-7
(1) Clearing Procedures ........................................................................S-7
(2) Data/Conditions Cleared by Reset Switches/Pins ...........................S-8
3. UTILITY MODE ........... ............. ............ .......................... ......................... .........S-9
3-1. Utility Mode Selection Screen . .................................................................S-9
3-2. Utility Mode Function Tree .......................................................................S-9
3-3. Settings in the Utility Mode ......................................................................S-10
(1) User’s choice mode .........................................................................S-10
(2) Administrator Mode .........................................................................S-13
4. Tech. Rep. Mode .............................................................................................S-17
4-1. Tech. Rep. Mode Menu Screen ...............................................................S-17
4-2. Tech. Rep. Mode Function Setting Procedure .........................................S-17
4-3. Tech. Rep. Mode Menu Function Tree ....................................................S-18
4-4. Setting in the Tech. Rep. Mode ...............................................................S-20
(1) Machine Adjust ................................................................................S-20
(2) Image Adjust ....................................................................................S-22
(3) System Input ....................................................................................S-23
(4) Counter ............................................................................................S-25
(5) State Confirm ...................................................................................S-28
(6) ADF Check ............................................... ...................................... .S-30
(7) ROM Version ............. ......................... ......................... ....................S-30
(8) RD Mode ............................................................... .. .... .. ....... .... .. .. ...S-31
(9) Administrator # Input .......................................................................S-33
(10) List Output .......................................................................................S-33
(11) Test Print ......................................................................................... S-35
(12) Gradation Adjust .............................................................................. S-35
5. TOUCH PANEL CORRECTION MODE ..........................................................S-36
5-1. Touch Panel Correction Mode Screen .....................................................S-36
5-2. Touch Panel Correction Mode Setting Procedures .................................S-36
6. SECURITY MODE ...........................................................................................S-37
6-1. Security Mode Screen .............................................................................S-37
6-2. Security Mode Setting Procedures ..........................................................S-37
6-3. Settings in the Security Mode ............................................................. .... .S-38
7. DATE/TIME INPUT MODE .................................................. ......................... ...S-39
7-1. Date/Time Input mode Screen .................................................................S-39
7-2. Date/Time Input Mode Setting Procedure ...............................................S-39
i
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
1. CONTROL PANEL KEYS AND TOUCH PANEL
1-1. Control Panel Keys
14
13
123
Access
Scan Copy
1 2 3
4 5 6
Energy Saver
7 8 9
Auto Color
Interrupt
0 C
Full Color
Stop
Start
4
Panel Reset
Black
5
6
7
8
9
Contrast
Utility
Job Recall
4004P008AA
101112
S-1
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
1. Access Mode Key
• Press to enter the access number when
Copy Track of the Administrator mode
available. Press the access Key.
2. Energy Saver Key
• Press to set machine into the Energy
saver mode.
3. Interrupt Key
• Press to select the Interrupt mode.
4. Panel Reset Key
• Press to set the machine into the initial
mode, clearing all settings made on the
control panel.
5. Clear Key
• Clear the various numeric values.
6. Stop Key
• Stop a scanning cycle.
7. Start Key
• Start a print cycle.
8. Auto Color/Full Color/Black Keys
• Auto Color Key: Press to make copies
according to the type of the original being
used.
• Full Color Key: Press to make full color
copies.
• Black Key: Press to make black-andwhite copies.
9. Touch Panel
• Shows various screens and message.
10. Job Recall Key
• Press to display the Job Recall screen.
11. Utility Key
• Press to show the Utility Mode menu.
12. Display Contrast Control Knob
• Use to adjust the brightness of the Touch
Panel.
13. 10-Key Pad
• The number of copies to be made.
• The various numeric values.
14. Copy Key/Scan Key
• Press to select the Scanner mode and the
Copy mode.
✽
The Scan mode is enabled when a printer
controller is mounted on the copier.
S-2
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
1-2. Explanation of the Touch Panel
(1) Basic Screen
The Basic screen is the initial screen that appears when the copier is turned ON.
1
2
3
4
1. Supplementary Function Keys
• Select the Auxiliary, Finishing, Orig. Copy, or Basics function.
2. Message Display
• Shows the current copier status, operating instructions and precautions, and other data
including the number of copies selected.
3. Basic D isplay
• Select the Text & Photo, Zoom, or Paper function.
4. Set Function Display
• Shows graphic representations of the copying functions currently set for use.
4004P022CB
S-3
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
(2) Warning Screens
The Warning screen may be a malfunction display, error display, warning display, or a caution display.
Given when a malfunction occurs.
<Malfunction Display>
E.g.: Malfunctions that can be identified
Given when an error occurs.
E.g.: Paper misfeed, door open, etc.
<Error Display>
with a specific code.
4004P023CB
<Warning Display>
Given when only a defective copy will be
produced because of erroneous or illegal
panel settings.
E.g.: Unmatched paper size in Auto Paper.
4004P025CB
4004P024CA
<Caution Display>
Given when, though further copier operation will be possible, it could eventually
result in a malfunction.
E.g.: Toner near empty, etc.
4004P026CB
S-4
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
<Engine / IR Warning>
When the engine or IR develops a faulty condition, a mark appears at the lower left
corner of the Basic screen. Touch this mark, and the display shows the details of the fault.
NOTE
• For details, see TROUBLE SHOOTING.
4004P027CB 4004P028CA
S-5
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
2. FUNCTION OF SWITCHES AND OTHER PARTS ON PWBs
2-1. PWB Location
PWB-H
2-2. PWB-H (MSC Board)
PWB-H
PWB-T
4004S002AA
12
PJ6
INI
TP3 TP2 TP1
COM TOTAL MEMORY
4004S001AB
Symbol Name Description
PJ2 Initialize Switch Resets a misfeed, malfunction, and erratic display.
TP1 Memory Clear Test Point Clears choice-related data.
NOTE
• It does not, however, clear data of Electronic
Counters, Administrator, RD mode, Scanner Addr.
Input, and IR backup data.
TP3 COM Test Point Ground used for memory clear.
S-6
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
2-3. PWB-T (Tech. Rep. Setting Switches Board)
PWB-T
PJ1
SW1
12
4004S003AB
Symbol Name Description
SW1 Trouble Reset Switch Resets the malfunction display.
(1) Clearing Procedures
Initialize
1. Turn ON the Power Switch.
2. With the circuit across pins of PJ2 closed, turn OFF then ON the Power Switch.
3. Open the circuit in about 5 seconds.
4. Check that the message “Initialize Completed” is displayed on the Touch Panel and
then touch the “Enter” key.
Memory Clear
1. Turn ON the Power Switch.
2. With the circuit across TP1 and TP3 closed, turn OFF then ON the Power Switch.
3. Open the circuit in about 5 seconds.
4. Check that the message “Memory Clear Completed” is displayed on the Touch Panel
and then touch the “Enter” key.
NOTES
• If the copier exhibits an erratic display or operation, reset and clear in the f ollowing order:
Initialize
• If Memory Clear has been performed, make settings of various functions once again.
Memory Clear.
→
S-7
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
(2) Data/Conditions Cleared by Reset Switches/Pins
Clearing Method
Data Cleared
Misfeed display
Fusing/
Optical
Malfunction
display
Erratic operation/display –
Job/Image –––
User’s Choice –––
Tech. Rep. Mode –––
Security Mode –––
Touch Panel Correction
Mode
❍
: Cleared –: Not cleared
Scanner
ROM
faults
Others
Front Door
Open/Close
❍
–
❍❍❍
–––
Trouble Reset
Switch
SW1
–
❍❍
❍❍❍
Initialize
PJ6
❍
Memory Cl ear
TP1
–
–
–
❍
❍
❍
❍
❍
S-8
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
00.11.30
3. UTILITY MODE
• Utility Mode is used to make various settings according to the user’s need.
3-1. Utility Mode Selection Screen
• Press the Utility key on the control panel
3-2. Utility Mode Function Tree
Default Settings
Meter Count
Job Memory Input
Utility
✽
Displayed when “Mode 2, 3 or 4” is selected for “Peripheral Mode” available from the
User’s Choice
Administrator Mode
✽
Scanner Addr. Input
Service mode.
Administrator Mode 1/2
Administrator Mode 2/2
Administrator Mode 1/2
Administrator Mode 2/2
4004P044CB
S-9
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
Factory Settings
00.11.30
3-3. Settings in the Utility Mode
Touch Panel
Display
Default Settings Select the copying function settings established when the Power
Meter Count Displays the counts of various counters. Pressing the Start key will let
Job Memory Input Permits programming of various functions, including copying jobs.
User’s Choice User’s Choice is used to make various settings according to the
Administrator
Mode
Scanner Addr.
Input
(1) User’s choice mode
• User’s Choice is used to make various settings according to the user’s need.
1. User’s Choice Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the “User’s Choice” key.
3. Select the appropriate screen from the menu.
4. Select the appropriate function.
5. After the settings are complete, touch the “OK” key to validate the settings.
Switch is turned ON or the Panel Reset key is pressed.
NOTE
• To designate the “Current Settings,” first make the necessary settings on the control panel, then touch “Current Settings.”
Current Settings
the copier produce a printed page of the counts of various counters.
user’s need.
The entry of the “Administrator #” set using the Tech. Rep. mode per-
mits the settings of the following functions.
Program the one-touch address for the Scanner mode.
Setting
<Exiting the Mode>
• Press the “OK” key.
S-10
FrameMaker Ver5.5E(PC) CF1501/CF2001 SWITCHES ON PWBs/TECH. REP. SETTINGS
Highlighted
ENGLISH
00.11.30
2. User’s Choice Mode Function Tree
Language selected
2in1 copy zoom
User’s Choice 1/2
User’s Choice
User’s Choice 2/2
Intelligent sorting
ACS Determination level Adjust
Confirmation Beep
Mail Bin Assignment
Auto Panel Reset
Energy Save Mode
Sleep Mode
1st Drawer Paper Select
3. Settings in the User’s Choice Mode
Touch Panel
Display
Setting (The default is ).
Language Select the language of the Touch Panel messages.
Metric Areas Inch Areas
ENGLISH
DUTCH ITALIAN SPANISH
PORTUGUESE
SWEDISH FINISH
GERMAN FRENCH FRENCH SPANISH
JAPANESE
DANISH
NORWEGIAN
JAPANESE
2in1 copy zoom Select whether or not to set the default zoom ratio, ×0.647 for the inch
areas and ×0.707 for the metric areas, when 2in1 is selected.
ON
OFF
Intelligent Sort Select whether to enable or disable the function that automatically
switches between Sort and Non-Sort according to the number of originals and the number of copy sets to be made.
Applicable when the system is equipped with a finishing option and
using an ADF.
Non-Auto
ACS
Determination
level Adjust
Auto Select
Set the mode evaluation level for the Auto Color mode.
std
Black 1 2 4 5 Full Color
3
Confirmation Beep Select whether to enable or disable the beep that sounds each time a
key on the control panel is pressed or a function on the Touch Panel
touched.
ON
OFF
S-11
Loading...