KONICA 7020 OUTLINE
1
OUTLINE
1 OUTLINE
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
OUTLINE OF SYSTEM
OUTLINE OF SYSTEM
The 7020 copier supports the options shown below.
Front
Finisher [FS-107]
Finisher Trays [FT-107]
1 OUTLINE
RADF [DF-314]
Platen Cover [CV-109]
7020 Copier
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
Right Side
Key counter
Total counter
Pedestal [DK-109]
2-Tray DB [DB-209]
Rear
Fax control
board [FK-101]
1-Tray (LCT) DB [DB-409]
Expansion memory unit [MU-404 / MU-405]
Printer control
board [IP-011]
Network board
[KN-304]
Expansion memory for printer
[MU-403/MU-404]
1-1
7020 PRODUCT SPECIFICATIONS
7020 PRODUCT SPECIFICATIONS
2
1. Type
1 OUTLINE2 UNIT EXPLANATION3 DIS./ASSEMBLY
Type: Semi-console type
Copying method: Indirect electrostatic method
Original table method:
Original alignment: Left rear standard
Photosensitive material:
Sensitizing method:
Paper feed trays: Two trays
*Option
2. Functions
Originals: Sheets; book; solid object
Original size: A3 max.
Copy sizes: A3 to A5, 11x17~5.5x8.5
Tray 1:
Tray 2:
ADU usable paper size:
Magnification:
Fixed
OPC
Laser writing
(500 sheets per tray; 80g/m
Multisheet by-pass tray
(50 sheets; 80g/m
DB-209 (Two trays; 500
sheets/tray; 80g/m
DB-409 (One tray; 1500
sheets; 80g/m
B4, A4, A4R, B5 (Only for Europe), B5R (Only for U.S.A.),
A5R, 8.5x14, 8.5x11, 8.5x11R,
5.5x8.5
A3, B4 (Only for Europe), A4,
A4R, B5 (Only for U.S.A.),
B5R, A5R, 11x17, 8.5x14 (Only
for U.S.A.), 8.5x11, 8.5x11R,
5.5x8.5 (Only for U.S.A.)
A3, B4, A4, A4R, B5, B5R,
A5R, 8.5x11, 8.5x11R
Fixed magnifications:
x1.00, x1.41, x1.22, x1.15,
x0.86, x0.82, x0.71
Special ratio: Three kinds.
Zoom magnifications:
x0.25 to x4.00 (1% steps)
Vertical magnifications:
x0.25 to x4.00 (1% steps)
Horizontal magnifications:
x0.25 to x4.00 (1% steps)
Warm-up time: Within 30 seconds (at 20˚C,
at rated voltage)*1
First copy out time: Approx. 5 seconds
Continuous copy speed (life size copies/min):
Size CPM
A4 / 8.5x11 20
Continuous copy count:
1 to 999
Copy density selections: manual, AE
Arbitrary density (2 modes)
Resolution: 600 dpi x 600 dpi
2
)
2
)
2
)*
2
)*
E-RDH memory: Standard 32 MB
Maximum 288 MB
Special functions: Intersheet; job memory; OHP
(blank sheet interleave / copy
interleave / OHP only); shift /
reduction shift; frame erasure
/ fold erasure; original image
quality (character, photo, pencil); book copy; B/W reverse;
original auto layout; original-related settings (mixed, Z-fold,
nonstandard, image head correction); non image area
erase; 2-in-1, 4-in-1, 8-in-1; rotation sort; repeat; memory
copy; booklets; page insertion;
density monitor; chapter division; confirmation copy; density shift; copy reservation;
stamping (stamp/watermark);
application button customization;
weekly timer; KRDS
3. Applicable copy paper
Plain paper: 60 to 90 g/m2 high-quality
paper
Special paper Label paper
(bypass feed only): OHP film
Blueprint-master paper
Recycled paper
50 to 59 g/m
91 to 130 g/m
*1 Warm-up time differs depending on the Power
Source (Voltage).
2
high-quality paper
2
high-quality paper
1-2
CENTER CROSS-SECTIONAL VIEW
CENTER CROSS-SECTIONAL VIEW
1 OUTLINE2 UNIT EXPLANATION3 DIS./ASSEMBLY
2
V mirror unit
Toner bottle
Cleaning/tonerrecycling unit
Charging
corona unit
Image write unit
Upper tray
Exposure unit
Developing unit
CCD unit
Fixing unit
Drum unit
Separation
corona unit
Transfer
corona unit
ADU unit
(ADU door)
By-pass unit
Lower tray
Paper path when DB209/409 is installed.
DB
1-4
Loading...