KOHLER K-8807, K-8814, K-8813 User Manual

Installation Guide

Sink Strainer

K-8807 K-8813 K-8814

M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”

112446-2-BC

Thank You For Choosing Kohler

We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Adjustable
Wrench

Plumbers
Putty

Various
Screwdrivers

Before You Begin

Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully inspect waste and supply tubing for any sign of

damage.
Replace waste or supply tubing if necessary.
Install the faucet according to the instructions packed with the

faucet.
Kohler Co. reserves the right to make revisions in the design of

products without notice, as specified within the Price Book.

112446-2-BC 2 Kohler Co.

K-8813, K-8814K-8807

Strainer Plate

Body

Plumbers Putty

Gasket

Plate

Nut

Washer

Tailpiece

Nut

Rubber Washer

Friction W asher

Tailpiece

Basket Strainer

Strainer

Plumbers Putty

Locknut
Washer

Nut

1. Install the Strainer

Apply a ring of plumbers putty to the underside edge of the
drain body flange or strainer body flange.

Insert the drain or strainer body in the sink.
For K-8807 model. Assemble a gasket, plate, and nut to the drain

body from under the sink.
For K-8813 and K-8814 models. Assemble the rubber washer,

friction washer, and locknut to the strainer body from under the
sink.

Wrench tighten.

NOTE: Do not reposition the drain after the locknut has been
tightened.

Align the wide end of the tailpiece with the drain or strainer
body, slide the nut onto the tailpiece, and thread the nut to the
drain or strainer body.

Position the trap on the end of the tailpiece.
If necessary, cut the tailpiece to ensure proper fit.

Kohler Co. 3 112446-2-BC

Install the Strainer (cont.)

Securely tighten the nut.

For K-8807 model. Insert stainer plate into strainer.
For K-8813 and K-8814 models. Insert basket strainer into

strainer.

112446-2-BC 4 Kohler Co.