Kohler K-76663T, K-76664T Installation Instructions Manual
-1-
NEW REACH
INSTALLATION INSTRUCTIONS
WASHBASIN CABINETS
K-76664T/K-76663T
BEFORE YOU BEGINBEFORE YOU BEGIN
·
·
·
·
·
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-
Turn off the water supply.
The pluming installation must comply with Water Supply
Regulations/Bye-laws, Building Regulations or any
particular regulations and practices, specified by the local
water company or water undertakers. The installation
should be carried out by a plumber.
Before installation carefully inspect the new fixture for any
signs of damage.
This product complies with GB 24977-2010.
please leave instructions for the
consumer.
NEW REACH bathroom cabinet adopts E1 grade woodbased panel of high quality, and with further processing,
its harmful emissions will be less than 1.5mg/L.
·
·
·
·
·
·
·
·
-
E1
1.5mg/L
GB 24977-2010
ORDERING INFORMATION
This installation covers the following products in the NEW
REACH range:
NEW REACH 660mm Washbasin Cabinet..........K-76664T
NEW REACH 1010mm Washbasin Cabinet........K-76663T
660mm .............................................K-76664T
1010mm ...........................................K-76663T
CHANGSHU KOHLER LTD., SOUTHEAST ECONOMIC DEVELOPMENT ZONE,
CHANGSHU, JIANGSU PROVINCE, CHINA POST CODE 215500
215500
©©Copyright Kohler China Investment Co., Ltd. 2015
2015
SAFETY WARNINGS
Kohler products are precision-engineered and should give
continued superior and safe performance, provided:
1. They are installed, commissioned, operated and
maintained in accordance with the recommendations given
in this Manual.
2. Periodic attention is given, as necessary, to maintain the
product in good functional order. Recommended
guidelines are given in the section.
Carefully inspect the new fixture for any signs of damage.
When installing Kohler Products, manufacturers guidelines for
power tool safety should be followed.
MAINTENANCE
1.
2.
1274633-T01-A
-2-
K-76663TK-76664T
Fig.1
1
ROUGHING-IN
UNIT : mm
Reference Value
Kohler reserves the right to change marked dimensions without prior notice.
660
1020
483
483
510
510
Fig.2
2
INSTALLATION
A. Install Washbasin Cabinet
Install the services.
Hot (H) and Cold (C) inlets must be connected to the correct
inlet pipes.
Install the drain in accordance with the manufacturer s
instructions.
We suggest using P-trap drain. Connect P-trap pipe with
washbasin drain.
Make sure a watertight seal exisits on all
washbasin drain connections.
Provide access to the plumbing connections
for future plumbing maintenance.
The hot and cold water supplies must be installed with
isolating valves.
Caution!
Caution!
A.
(H) (C)
P
1274633-T01-A
Loading...