Kohler K-4709 User Manual
3
C
TM - 200
Features
Elongated closed front seat fits most elongated toilets
•
Continuously heated water with adjustable
•
temperature settings
2 positionable spray wands with adjustable water
•
pressure, oscillate, and pulsate functions
Heated seat with adjustable temperature settings
•
Air blower function allowing selection of air speed
•
and temperature
Automatic deodorization function
•
Automatic night light function to illuminate the bowl
•
Remote control with 2 programmable user presets to
•
store preferred settings
Energy save function
•
Anti-microbial materials used in seat and nozzles
•
Quick-release design for ease of cleaning
•
Includes color-matched remote, power cord, and
•
water supply hoses
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.4.2
•
ANSI Z124.5
•
UL 1431
•
TOILET SEAT WITH BIDET
FUNCTIONALITY
K-4709
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Description Colors/Finishes
K-4709 Toilet seat with bidet functionality ❑ 0 White ❑ Other_____
Product Specification
The toilet seat with bidet functionality shall fit most elongated toilets. Toilet seat shall have continuously heated water with
adjustable temperature settings. Toilet will have 2 positionable spray wands with adjustable water pressure, oscillate, and
pulsate functions. This toilet seat shall be of energy saving design and include heated seat, water temperature, and air speed
controls. Toilet seat will have automatic deodorization and night light functions. The remote control shall be programmable and
capable of storing 2 sets of custom user settings. Toilet seat shall be constructed of anti-microbial materials and incorporate a
quick-release design for ease of cleaning. Toilet seat shall include a color-matched remote, power cord, and water supply hoses.
Toilet shall be Kohler Model K-4709-_____ .
Page 1 of 2
1054180-4-
USA/Canada: 1-800-4KOHLER
B
(1-800-456-4537)
www.kohler.com
3
C
TM - 200
Technical Information
Fixture:
Configuration 20 psi (1.38 bar) - 80 psi
(5.52 bar)
Electrical rating 120 VAC / 60 Hz / 1260 W
Power cord length 46″ (1.17 m)
A dedicated circuit protected with a Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device
(RCD) is required.
4-7/8"
(124 mm)
Installation Notes
Install this product according to the installation guide.
16-3/8" (416 mm)
2"
(51 mm)
7/8" (22 mm)
2"
(51 mm)
16-3/8" (416 mm)
11-1/16"
(281 mm)
14-9/16"
(370 mm)
20-1/4" (514 mm)
Product Diagram
3
C
TM - 200 TOILET SEAT WITH BIDET FUNCTIONALITY
age2of2
P
1054180-4-
B
REMOTE
32" (813 mm) R.
6"
7-13/16"
(198 mm)
The receptacle should be located at least 6" (152 mm)
above the floor line, and within a 32" (813 mm) radius
measured 2" (51 mm) to the right of the toilet ledge, as
shown.
(152 mm)
Min
2" (51 mm)
ELECTRICAL SERVICE DETAIL
Loading...