Front view
Lens
Microphone
Speaker
HDMI™ Out
USB/AV Out
5V DC-in
Recording light
Power
Infrared receiver (for
optional remote control)
ENGLISH
www.kodak.com/go/zx1support 1
ENGLISH
P
r
e
v
i
o
u
s
/
N
e
x
t
R
e
v
e
r
s
e
/
F
o
r
w
a
r
d
V
i
d
e
o
/
p
i
c
t
u
r
e
s
i
z
e
L
C
D
D
e
l
e
t
e
R
e
c
o
r
d
/
O
K
S
t
r
a
p
p
o
s
t
T
r
i
p
o
d
s
o
c
k
e
t
R
e
c
o
r
d
i
n
g
m
o
d
e
S
t
o
p
V
o
l
u
me
/
Z
o
o
m
R
e
v
i
e
w
mo
d
e
/
S
l
o
w
mo
t
i
o
n
Back view
2 www.kodak.com/go/easysharecenter
Understanding the status icons
R
e
c
o
r
d
i
n
g
s
t
a
t
u
s
M
o
d
e
B
a
t
t
e
r
y
l
e
v
e
l
C
a
r
d
i
s
i
n
s
e
r
t
e
d
Z
o
o
m
i
n
d
i
c
a
t
o
r
V
i
d
e
o
l
e
n
g
t
h
E
l
a
p
s
e
d
t
i
m
e
V
o
l
u
me
D
C
p
o
w
e
r
(
p
l
u
g
g
e
d
i
n
)
N
o
c
a
r
d
i
s
i
n
s
e
r
t
e
d
V
i
d
e
o
l
e
n
g
t
h
R
e
c
o
r
d
i
n
g
i
c
o
n
s
P
l
a
y
b
a
c
k
i
c
o
n
s
V
i
d
e
o
/
p
i
c
t
u
r
e
n
u
m
b
e
r
D
i
r
e
c
t
i
o
n
/
S
p
e
e
d
I
n
d
i
c
a
t
o
r
ENGLISH
www.kodak.com/go/zx1support 3
1 Setting up your camera
Lights are on
while the
charger is
plugged in.
(Charge for
approximately
12 hours.)
31 2
IMPORTANT:
Charging, loading the rechargeable batteries
4 www.kodak.com/go/easysharecenter
Your camera is water resistant—it is not waterproof.
Compatible KODAK
Batteries
• KODAK Li-Ion Rechargeable Digital Camera Battery KLIC-8000
• KODAK Lithium Digital Camera Battery CRV3
• KODAK AA Batteries (Ni-MH, alkaline)
Setting up your camera
CAUTION:
optional
1
Turn off the camera.
2
Insert or remove the
optional card.
3
Turn on the camera.
Using an optional KODAK SD or SDHC Card
Your camera has internal memory, but we recommend a KODAK SD or SDHC Card to
conveniently store more videos/pictures.
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage
the pictures, the card, or the camera.
Purchase accessories www.kodak.com/go/Zx1accessories
www.kodak.com/go/zx1support 5
Setting up your camera
Connecting the strap
6 www.kodak.com/go/easysharecenter
2 Using your camera
to change current field.
for previous/next field.
OK
to accept.
At the prompt, press OK.
Date/Time:
Turning on the camera
Setting the date/time
NOTE: To change the date & time later, see page 13.
www.kodak.com/go/zx1support 7
Using your camera
When you turn on the camera,
it’s ready to take videos.
Zoom in/out
Start/stop recording
• HD: 16:9, 720p @ 30 fps (HDTV)
• HD60: 16:9, 720p @ 60 fps (HDTV)
• Still (3 MP pictures)
• VGA: 4:3, 640 x 480 @ 30 fps (Web-ready)
Choose a mode:
NOTE: To take even more videos, insert an SD or SDHC Card.
(OK)
Recording
Purchase accessories www.kodak.com/go/Zx1accessories
Use the optional remote control
8 www.kodak.com/go/easysharecenter
see page 11
Playing videos
Review button (press again for
thumbnails, timeline)
Volume
Previous/next video
Play/Pause
During playback, press to
fast-forward or fast-rewind 2X,
4X, 8X, 16X.
While paused, press to forward/
reverse one frame at a time.
Stop video playback
(OK)
Delete the current or all
videos/pictures
Using your camera
To use the optional remote control, see page 11.
www.kodak.com/go/zx1support 9
Using your camera
HDMI cable
(for HD quality)
AV cable
(for VGA quality)
Playing back on a TV
To set Video Out (NTSC/PAL), see page 13.
10 www.kodak.com/go/easysharecenter
Using your camera
R
e
m
o
v
e
t
h
e
t
a
b
t
o
a
c
t
i
v
a
t
e
t
h
e
b
a
t
t
e
r
y
.
M
o
d
e
S
e
l
e
c
t
o
r
(
V
i
d
e
o
/
S
t
i
l
l
)
R
e
v
i
e
w
M
o
d
e
R
e
c
o
r
d
/
O
K
S
t
o
p
D
e
l
e
t
e
P
r
e
v
i
o
u
s
/
N
e
x
t
R
e
v
e
r
s
e
/
F
o
r
w
a
r
d
V
o
l
u
me
/
Z
o
o
m
Using the optional remote control
Use the optional remote control to start/stop recording, take a picture, and review
videos and pictures. Visit
Using the remote control
www.kodak.com/go/Zx1accessories.
www.kodak.com/go/zx1support 11
Using your camera
If this is the first time you’ve connected to this WINDOWS
OS-based PC, follow the prompts to install ARCSOFT
MEDIAIMPRESSION for Kodak Software. You can then
transfer and share videos.
Connect, then turn on the camera.
2
1
Transferring, editing, sharing online
Get ArcSoft product support www.arcsoft.com/support
12 www.kodak.com/go/easysharecenter
Using your camera
CAUTION:
W
h
e
n
t
h
e
c
a
m
e
r
a
i
s
o
n
,
p
r
e
s
s
a
n
y
t
w
o
b
u
t
t
o
n
s
t
o
a
c
c
e
s
s
t
h
e
S
e
t
u
p
m
e
n
u
.
Accessing settings
Date/Time
Set the date and time.
Sounds ■ On
■ Off
Video Out
Choose the regional setting that lets you connect the camera to a
television or other external device.
Format SD/SDHC Card
Deletes everything on the card; formats the card.
■ NTSC
■ PAL
Formatting deletes all videos/pictures. Removing a card during
formatting may damage the card.
NOTE:
The firmware version is displayed at the top of the Settings screen.
www.kodak.com/go/zx1support 13
3 Getting help
Getting help on the Web
Camera
Email, write, or phone Kodak www.kodak.com/go/contact
Get support for your product (FAQs, troubleshooting
information, arrange for repairs, etc.)
Get support for accessories www.kodak.com/go/support
Purchase camera accessories (lenses, cards, etc.) www.kodak.com/go/Zx1accessories
Download the latest camera firmware and software www.kodak.com/go/Zx1downloads
See online demonstrations of your camera www.kodak.com/go/howto
Register your camera www.kodak.com/go/register
Software
Get information on ARCSOFT Software www.arcsoft.com/support
Get help with the WINDOWS OS and working with
digital pictures
www.kodak.com/go/Zx1support
www.kodak.com/go/pcbasics
14 www.kodak.com/go/easysharecenter
4 Troubleshooting
Status Solution
■ Unrecognized or corrupt file. Transfer videos/pictures to your computer using
the USB cable or an optional card reader. Then format the card in the camera
or card reader.
■ An error may have occurred while formatting the card. Transfer
videos/pictures to your computer using the USB cable or an optional card
reader. Then format the card in the camera or card reader.
■ The memory card is either unrecognized by the device, or is not formatted.
Transfer videos/pictures to your computer using the USB cable or an optional
card reader. Then format the card in the camera.
■ Try another card.
■ Card is nearly full. Transfer videos/pictures to your computer using the USB
cable or an optional card reader.
■ Unrecognized or corrupt file. Transfer videos/pictures to your computer using
the USB cable or an optional card reader. Then format the card in the camera.
■ Try another card.
■ Low batteries. Charge the batteries.
www.kodak.com/go/zx1support 15
Troubleshooting
Status Solution
■ Internal memory is full. Transfer videos/pictures to your computer using the
USB cable. Use an SD/SDHC card to take more video/pictures.
Status Solution
Camera will not turn on. ■ Ensure batteries are correctly inserted.
■ Charge the batteries.
■ If camera still does not turn on, visit
www.kodak.com/go/Zx1support and click Step-by-Step
Solutions & Repair.
Videos do not play on a TV. ■ Ensure an HDMI or AV cable is properly connected directly to
Camera will not work with
optional remote control.
Images are blurry. ■ Ensure lens is clean of fingerprints.
the TV input(s).
■ Ensure TV menu settings are correct for an HDMI or AV
connection.
■ Ensure batteries are correctly inserted in the remote control.
■ Ensure batteries are correctly inserted in the camera.
■ Ensure the camera infrared receiver (above the lens) and the
remote control have an unobstructed path.
■ Ensure subject is at least 70 cm (27 in.) from camera lens.
16 www.kodak.com/go/easysharecenter
Status Solution
Videos are jumpy, not
stable.
Questions or problems
with ARCSOFT Software.
Questions or problems
with other third party
software.
■ Use a tripod or mini tripod to steady the camera.
■ Visit www.arcsoft.com/support.
■ Visit support sites for those applications.
Troubleshooting
www.kodak.com/go/zx1support 17
5 Appendix
CAUTION:
Safety
Do not disassemble this product; there are no user-serviceable parts inside.
Refer servicing to qualified service personnel. KODAK AC Adapters and
battery chargers are intended for indoor use only. The use of controls,
adjustments, or procedures other than those specified herein may result in
exposure to shock and/or electrical or mechanical hazards. If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.
■ The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit
■ Use only a USB-certified computer equipped with a current-limiting motherboard.
Contact your computer manufacturer if you have questions.
■ If using this product in an airplane, observe all instructions of the airline.
■ When removing batteries, allow them to cool; they may be hot.
■ Follow all warnings and instructions supplied by the battery manufacturer.
■ Use only batteries approved for this product to avoid risk of explosion.
■ Keep batteries out of the reach of children.
■ Do not allow batteries to touch metal objects, including coins. Otherwise, a battery
may short circuit, discharge energy, become hot, or leak.
www.kodak.com/go/accessories.
18 www.kodak.com/go/easysharecenter
Appendix
■ Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or
extreme temperature.
■ Remove the batteries when the product is stored. In the unlikely event that battery
fluid leaks inside the product, contact Kodak customer support.
■ In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.
■ Dispose of batteries according to local and national regulations. Visit
www.kodak.com/go/kes.
■ Do not charge non-rechargeable batteries.
For more information on batteries, see www.kodak.com/go/batterytypes.
Care and maintenance
■ If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■ For camera disposal or recycling information, contact your local authorities. In the
www.kodak.com/go/zx1support 19
Appendix
US, visit the Electronics Industry Alliance Web site at www.eiae.org or
www.kodak.com/go/Zx1support.
Limited Warranty
Kodak warrants KODAK Consumer Electronic Products and Accessories (“Products”),
excluding batteries, to be free from malfunctions and defects in both materials and
workmanship for the duration specified on the KODAK Product packaging. Retain the
original dated sales receipt. Proof of the date of purchase will be required with any
request for warranty repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service will
include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are used
in making repairs, those parts may be remanufactured, or may contain remanufactured
materials. If it is necessary to replace the entire Product, it may be replaced with a
remanufactured Product. Remanufactured Products, parts and materials are warranted
for the remaining warranty term of the original Product, or 90 days after the date of
repair or replacement, whichever is longer.
20 www.kodak.com/go/easysharecenter
Appendix
Limitations
This warranty does not cover circumstances beyond Kodak’s control. This warranty does
not apply when failure is due to shipping damage, accident, alteration, modification,
unauthorized service, misuse, abuse, use with incompatible accessories or attachments
(such as third party ink or ink tanks), failure to follow Kodak’s operation, maintenance
or repacking instructions, failure to use items supplied by Kodak (such as adapters and
cables), or claims made after the duration of this warranty.
Kodak makes no other express or implied warranty for this product, and
disclaims the implied warranties of merchantability and fitness for a
particular purpose. In the event that the exclusion of any implied warranty is
ineffective under the law, the duration of the implied warranty will be one year from the
purchase date or such longer period as required by law. The option of repair,
replacement, or refund is Kodak’s only obligation. Kodak will not be responsible for any
special, consequential or incidental damages resulting from the sale, purchase, or use
of this product regardless of the cause. Liability for any special, consequential or
incidental damages (including but not limited to loss of revenue or profit, downtime
costs, loss of the use of the equipment, cost of substitute equipment, facilities or
services, or claims of your customers for such damages resulting from the purchase,
use, or failure of the Product), regardless of cause or for breach of any written or
implied warranty is expressly disclaimed.
Your righ ts
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
www.kodak.com/go/zx1support 21
Appendix
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this
warranty may be different. Unless a specific Kodak warranty is communicated to the
purchaser in writing by a Kodak company, no warranty or liability exists beyond any
minimum requirements imposed by law, even though defect, damage, or loss may be by
negligence or other act.
Regulatory compliance
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
or used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures: 1) reorient or relocate the receiving antenna; 2) increase the separation
between the equipment and the receiver; 3) connect the equipment to an outlet on a
circuit different from that to which the receiver is connected; 4) consult the dealer or an
experienced radio/TV technician for additional suggestions. Any changes or
22 www.kodak.com/go/easysharecenter
Appendix
modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. Where shielded interface cables
have been provided with the product or specified additional components or accessories
elsewhere defined to be used with the installation of the product, they must be used in
order to ensure compliance with FCC regulation.
China RoHS
www.kodak.com/go/zx1support 23
Appendix
Korean Class B ITE
VCCI Class B ITE
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian
ICES-003.
Observation des normes-Classe B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
24 www.kodak.com/go/easysharecenter
Appendix
N137
Australian C-Tick
Eastman Kodak Company, 2009
All screen images are simulated.
Kodak is a trademark of Eastman Kodak Company.
ArcSoft and MediaImpression are trademarks of ArcSoft, Inc.
Apple, iLife, iWeb, MobileMe, iTunes, iPhone, iPod, and Apple TV are trademarks of
Apple, Inc.
www.kodak.com/go/zx1support 25
Loading...