We’re glad you chose this KODAK VERIT Wireless All-In-One Inkjet Printer.
Need help fast?
Read your Setup Manual and/or Extended User Guide first for quick tips that make using your KODAK VERIT Wireless All-InOne Inkjet Printer more enjoyable. If you have read your instructions and still need assistance, you may access our online help at
www.kodakverite.com/support
or call 1-844-995-6325 (1-844-99KODAK)
Details, explanations, and expressions in the display panel of the actual product may differ from those shown in this
Extended User Guide. The displayed items and specifications are subject to change without notice.
Please read the following instructions carefully before operating the
device and refer to them as needed to ensure the continued safe
operation of your device.
Your KODAK Product and supplies have been designed and tested to
meet strict safety requirements, including safety agency evaluation
and certification, compliance with electromagnetic regulations and
established environmental standards.
The safety, environmental testing and performance of this device have
been verified using approved materials only.
WARNING:Unauthorized alterations, which may include the
addition of new functions or connection of external
devices, may impact the product certification.
Please contact your Customer Support representative
for more information at www.kodakverite.com/support
Dear Customer
You've purchased a very different kind of printer and we are glad you did.
Now we want to help you get started saving on ink and using all of it's
features. This Kodak Verité printer provides quality printing for personal
and office / small business use and it always helps you save on the cost of
printing. For printing, copying and scanning, this all-in-one printer utilizes
the most up-to-date technology. Easy to install ink cartridges are always
provided with our printers; however, you must remove all packaging
used for transportation first. You can find the latest Software drivers and
manuals for the printer on the website:
www.kodakverite.com/support
We hope you enjoy your KODAK VERITÉ Wireless All-In-One Inkjet
Printer and its many functions!
About this Extended User Guide
Read the entire Extended User Guide carefully.
Follow all safety instructions in order to ensure proper operation of your
device. The manufacturer accepts no liability if these instructions are not
followed.
Symbols used in this Extended User Guide
•
SymbolsDescription
DANGER
Danger to Persons
This symbol gives warning of danger to
persons. Physical injury or damage can result
from improper handling.
DO NOT TOUCH
This symbol gives warning of danger to
persons. Physical injury or damage can result
from improper handling.
Damage to the Device or Loss of Data
CAUTIONC
Note(s)❏
This symbol gives warning of damage to
the device and possible loss of data. These
damages can result from improper handling.
This symbol designates tips that will help you
to use your device more effectively and easily.
Features
•
ECO mode
• You can easily save ink consumption.
Refer to “ECO mode” on page 21.
»»
Paper requirement
• You can load up to 60 sheets of normal printer paper onto the Paper
support.
Refer to “Specifications for print media” on page 26.
»»
ID Card Copy function
• Using the ID Card Copy function, you can copy both sides of a small
document (e.g. business card) onto one page.
Refer to “ID Card Copy” on page 37.
»»
Web interface
• The web interface is available to you on all operating systems.
You can access the web interface with an Internet browser on your
PC and conduct many different settings to your device.
Refer to “Web interface” on page 53.
»»
Status Messenger (for Windows® only)
• The Status Messenger is available on the operating system.
It is installed together with the printer driver and informs you of the
newest driver, Software or application to download and install.
Also, it shows the present status of the device. You receive detailed
error messages among other things.
Refer to “Check print status from your PC” on page 25.
»»
Copying and scanning
• The device also supports copying and scanning of color or black &
white documents. You can scan the document and save it to your
Network PC.
Refer to “Making copies” on page 34 and “Scanner” on page 39.
»»
English
3
General safety information
Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this Extended User Guide is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to Funai will be adapted and published on the
Funai support website as soon as possible.
Warranty (Limited Warranty on page 73.)
•
• DO NOT attempt to take the device apart. There is danger of an
electrical shock. No components are user serviceable. Opening
the device voids the warranty. DO NOT disassemble or remove
covers to the inside of the device. Repairs may only be done by an
Authorized Service Center. Failure to do so shall void any warranty,
stated or implied.
• Any operation expressly prohibited in this Extended User Guide,
any adjustments or assembly procedures not recommended or
authorized in this Extended User Guide shall void the warranty.
• DO NOT make any changes or settings that are not described in this
Extended User Guide. Physical injury or damage to the device or loss
of data can result from improper handling. Take note of all warning
and safety notes indicated.
• DO NOT remove the product label located on the bottom side from
your device; this would void the warranty.
Setting up the device
•
Please read the following instructions when you set up the device.
• Select a stable location.
Select a level, stable place with adequate space for air circulation.
Make sure to allow extra space to open covers and trays.
The setup area should be well-ventilated and away from direct
sunlight or sources of heat, cold, and humidity. DO NOT set the
device near the edge of your desk or table.
• Place the device on a flat and stable surface.
• The device should be placed securely. If the device should fall, it can
be damaged or can cause injury to people, especially small children.
If the device is dropped it should be inspected by an Authorized
Service Center.
• Position all cables in such a way that no one will stumble on them,
thus avoiding possible injuries to persons or damage to the device
itself.
• Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture. DO NOT place the device in the
vicinity of heaters or air conditioners. Observe the information on
temperature and humidity in the technical data.
• The device must have sufficient ventilation and may not be covered.
DO NOT put your device in closed cabinets or boxes. DO NOT place
the device on soft surfaces such as tablecloths or carpets and do not
cover the ventilation slits. Otherwise the device could overheat or
degrade.
• The area in which you operate the device must be adequately
ventilated, especially if the device is used frequently. Set up your
device in such a way that the Heat or A/C vent's air flow must be
directed away from the work station.
• Never use a gas duster on this device. This gas trapped inside of this
device may cause ignition and explosion.
• In the event that the device becomes too hot, or if you see smoke
coming from the device, you must immediately disconnect the AC
plug from the AC outlet. Have your device examined by trained
professionals at an Authorized Service Center To prevent the spread
of fire, open flames should be kept away from the device.
• DO NOT allow liquids to enter into the device. Disconnect the
device from the AC plug if liquids or foreign objects have entered
the device and have your device examined by trained professionals
at an Authorized Service Center.
• DO NOT allow children to handle the device without supervision.
The packing materials should be kept out of the hands of children.
• DO NOT press forcefully on the scanner lid when you scan thicker
documents or three-dimensional items, this could damage the
scanner lid and/or the scanner glass.
• Make sure to place the device on a desk or table with adequate
strength. DO NOT shake the device as this may cause printing
failure or trouble. DO NOT place the device in a location or
environment of high temperature or high humidity.
Power supply
•
• Check whether the voltage rating of your device (indicated on the
product label located on the bottom side) is adequate for the power
source available at the setup location.
• DO NOT plug in the device in moist rooms. Never touch the AC
Power cord or the AC plug connection with wet hands.
• Set up your device so that the AC Power cord is easily accessible.
In an emergency, disconnect your device from the power supply by
pulling the AC plug.
• Never touch the AC Power cord if the insulation is damaged. Turn
Off the circuit breaker for that AC outlet.
• Damaged wire could cause fire or electrical shock. Keep the AC
Power cord straight without being twisted, bent or scraped.
Please contact an Authorized Service Center.
• Before cleaning the surface of your device, disconnect it from the
power supply by only pulling the AC plug. Use a soft, lint-free cloth.
Never use liquid, gaseous or easily flammable cleansers (sprays,
abrasives, polishes, or alcohol). DO NOT allow any moisture to
reach the interior of the device.
• In rare cases, the saved settings can be partly or completely reset
to the Factory Default(s) when the AC plug is disconnected or in
the event of a Power outage. DO NOT disconnect the AC plug right
after a print job or after entering settings.
• Press
To completely turn Off the device, you must disconnect the AC plug.
Disconnect the AC plug to shut the device Off when trouble is found
or not in use. The AC Power cord shall remain readily available.
(Power/Standby) to turn the device On or Off (Standby).
CAUTIONC
• Turn the device Off (Standby) using
button located on the Control panel of the device before you
disconnect the AC plug from the AC outlet to turn the Unit
completely Off.
(Power/Standby)
English
4
Continued on next page.
Federal communications commission notice
•
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.
This equipment may generate or use radio frequency energy.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an AC outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Trademark information
•
All other registered and unregistered trademarks are the property of
their respective owners.
ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and
protect the environment through energy efficient
products and practices.
The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark
of Wi-Fi Alliance.
Google Cloud Print™ is a trademark of Google Inc.
AirPrint™ and the AirPrint logo™ are trademarks of
Apple Inc.
Declaration of conformity
•
Trade Name: KODAK
Responsible party: FUNAI CORPORATION, Inc.
Product Name: VERITE 65 PLUS/37 (US/Canada)
Regulatory Model
For regulatory purpose, this product is assigned a regulatory model name.
The regulatory model name should not be confused with the
product name or product model.
Canadian notice
•
CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
PC connection
•
Use only a custom high speed certified USB cable to connect the
device to your PC. The recommendable cable length is no longer than
5 feet (1.5 m).
: JM602-20UA
(VERITE 65 PLUS/37)
• Windows®, Windows® Server, Windows® Vista, Microsoft Edge,
Internet Explorer® and the Windows logo are trademarks of the
Microsoft group of companies in the United States and/or other
countries.
• Google™, Google Chrome™, Chrome OS™, Google Drive™, Gmail™
and Android™ are trademarks of Google Inc.
• Mac OS®, OS X®,
logo® are trademarks of Apple Inc., registered in the U.S. and other
countries.
• iOS is a trademark or registered trademark of Cisco® in the U.S. and
other countries and is used under license by Apple Inc.
• Intel® Core™ and Celeron™ are trademarks of Intel Corporation in
the U.S. and/or other countries.
Copyright
•
All other trademarks referenced herein are the property of their
respective owners.
Cables
•
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Wireless Network
•
The functioning of security systems, medical equipment or sensitive
devices can be disrupted by the transmission power of the device.
Observe any usage regulations (or restrictions) in the vicinity of such
equipment.
The use of this device can affect the operation of insufficiently
shielded medical devices, hearing aids and pacemakers through the
release of high frequency radiation. Also consult a doctor or the
manufacturer of a medical device to establish whether these are
sufficiently shielded from external high frequency radiation.
iPhone®, iPod touch®, iPad®,
Safari® and Mac
English
5
Continued on next page.
Near field communication (NFC)
•
Near Field Communication (NFC) is a Wireless connectivity
technology that enables convenient short-range communication
between electronic devices.
Using the NFC feature, you can directly print from your smartphone/
tablet simply by holding your smartphone/tablet over the NFC tag on
the device. Make sure you have read all the precautions below before
using the NFC.
– DO NOT place any metallic object on the NFC tag on the device.– DO NOT place strong magnet on or near the device. – Make sure to first turn On the NFC feature on your smartphone/
tablet, then hold it within 0.4 inch (10 mm) from the device.
– If the NFC does not work, try moving the position of the
smartphone/tablet.
– DO NOT press your smartphone/tablet hard against the device.
Your smartphone/tablet or the device may be damaged.
– Depending on the material used or the thickness of the
smartphone/tablet cover, connection to the device may be
affected.
Caution when handling ink cartridges
•
Never open an ink cartridge. Store both new and used cartridges in a
place where they will not come into the hands of children.
Ink cartridge safety
•
If ink gets on your skin, wash with soap and water. If ink gets into
your eyes, flush immediately with water. If any discomfort or change
in vision persists after washing, seek medical attention immediately.
For Safety Data Sheets (SDS) on inks, go to
www.kodakverite.com/support
LCD (liquid-crystal display) safety
•
Use only a dry, soft cloth to clean the LCD. DO NOT use any liquid or
chemical cleaners. If the LCD is damaged, contact Customer Support
immediately. If any of the solution from the display gets on your
hands, wash them thoroughly with soap and water.
If the liquid crystal solution gets into your eyes, flush your eyes
immediately with water. If any discomfort or change in vision persists
after washing, seek medical attention immediately.
About the Software
•
When carrying out a Software update only use the Printer Software
Upgrade file for your device from the website:
www.kodakverite.com/support
Using other Software files can lead to your device not functioning
properly. Funai accepts no liability for device malfunctions which can
be traced back to the use of third party Software.
Copying and Scanning precautions
•
Be aware that scanning, photocopying, or editing any of the following
may be punishable by law.
Copyrighted work
Unauthorized reproduction of copyrighted work is prohibited except
for personal/domestic use or use in a limited extent based on that
purpose.
Reproducing a photographic portrait may also be subject to
punishment.
Currency, securities, etc.
Forging any of the following to use as genuine articles or producing
misleading articles is subject to punishment by law.
• Banknotes, paper currency, coins (including foreign currency)
• Government bonds, territorial bonds
• Postal money order certificates
• Postal stamps, documentary stamps
• Capital stock certificates, debenture stock certificates
• Bills, checks
• Commuter passes, coupon tickets
• Other valuable paper
Official documents
Forging any of the following to use as genuine articles is subject to
punishment by law.
• Licenses, copies of corporate registration, and other
certifications/documents issued by public officials or
government offices.
• Agreements/contracts, documents of “rights and obligations”,
etc. for proof of facts created by private individuals.
• Seals, signatures, or symbol marks put on by public officials.
• Private seals and signatures
Relative laws
Criminal code, Copyright law, Act on Control of Imitation of
Currency and Securities, Alteration and Imitation of Coins, Money
Bills, Banknotes and Securities Circulating in Foreign States,
Postal Act, Act on Control of Imitation of Postal stamps, Act
on Punishment of Crimes Related to Stamps, Act on Control of
Imitation of Stamps.
When paper jam has occurred
•
In case of a paper jam, use both hands to carefully remove the paper
out of the unit. Throw the paper away carefully.
DO NOT make any repairs to the unit yourself. Improper
maintenance can result in injuries or damage to the unit. Only have
your device repaired by an Authorized Service Center.
The Kodak trademark and trade dress are used under license from
Eastman Kodak Company.
Funai is a registered trademark of Funai Electric Co., Ltd. and may not be
used in any way without the express written consent of Funai.
No part of this manual may be reproduced, transmitted, disseminated
or transcribed, in any form or for any purpose without the express prior
written consent of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai
reserves the right to change the content herein without the obligation to
notify any person or organization of such changes.
6
Overview
When opening the lid/door
•
8
Scanner glass
Front view
•
1
Paper support
2 Paper guide
3 Scanner lid
4 Paper exit tray
5 Exit tray extender
6 Menu display
7 Control panel and LEDs
1
2
3
45
9 Ink door
10 Ink cartridge holder
11 Front cover
9
8
6
7
Rear view
•
12
Rear cover (Duplex Unit)
13 Printer USB port — USB connection for your PC
10
11
14 AC inlet
15 AC Power cord and AC plug
12
14
13
15
English
7
Continued on next page.
Control panel & Menu display
1 Menu display
2 (up) button
3 button
4 (back) button
5 (down) button
6 (Wireless) LED and button
7 (ECO) LED and button
8 (Copy) button
9 (Power) LED and Power/Standby button
Buttons
•
(up)
(down)
(back)
(Wireless)
1
23456
78
(ECO)
— Use to select an item, set number of
copies, or to select a letter on the Menu
display.
— Use to confirm the current selection.
— Use to
· return to the previous screen
· cancel a current job
· delete the letters when inputting
· change the password
· cancel a WPS process
— Use to connect to the Wireless Network.
Wireless feature: On
· Press and hold (less than 3
seconds): establishes Wireless
Connection to the mobile device
using 'Easy Simple Print'.
· Press and hold (until the screen
of the Menu display switches):
establishes Wireless Connection
screen. Follow Step 2-4 in “Wi-Fi
Protected Setup” (right column)
on page 46.
— Use to shift ECO mode.
LEDs
•
(Wireless)
(ECO)— Indicates ECO mode is On.
(Power Yellow) — Indicates the present unit's status.
(Power Red)— Indicates the error status
— Indicates the connection status of the
Wireless Network and Easy Simple
Print.
e.g.) power supplied, working
Note(s)❏
• You can find the meaning of status and error lights in “Meaning
of LED behavior and error lights” on the next page. Please also
note the messages displayed in the web interface, or in the
Status Messenger (for Windows® only) on your PC.
9
(Copy)
(Power/Standby)
— Use to
· start a print job with the current
selection
· change deleted letters when
inputting
Unit status: ready
· Press and hold (less than 3
seconds): starts copying.
· Press and hold (longer than 3
seconds): starts printing the
configuration report.
— Press to change the power state.
Press and hold (3 seconds or less): enters
Sleep mode or wake On.
Press and hold (3 seconds or more): turns
the power Off. Make sure that you need
to turn the unit back On once if the unit is
in Sleep mode.
Note(s)❏
• The function carried out will vary, depending on the unit’s status
when you press a button.
Unit is turned Off
or in Sleep mode, a mode which is effective in saving power.
Even in Sleep mode, the unit is able to receive a print job from USB/Network equipment.
Unit is Starting.
When you turn On, KODAK Logo with “Starting Up” and the progress bar (
the Menu display.
Indicates that the unit is Ready.
The unit is able to receive a print job.
This Yellow LED behavior is also used when copying, scanning or cancelling copy or scan.
Indicates that the unit is Running.
This Yellow LED behavior is used when printing, cancelling a print job and after the print jobs are received,
running the alignment process (While running the alignment process, any new print job received will start
printing after the alignment process is done. (The print job is not affected while the unit is scanning the
alignment pattern.)).
This Yellow LED behavior is used when updating Software, restoring factory default, performing weekly
maintenance.
System error occurred.
Refer to page 65.
) will be displayed on
English
9
Continued on next page.
ECO mode status
LED(s)BehaviorMeaning / Possible cause(s)
No lightIndicates that ECO mode 0 (ECO Off).
Lights upIndicates that ECO mode 1 is ON (Save 20% ink).
Lights upIndicates that ECO mode 2 is ON (Save 20% ink, page reduce 12%).
Network status
LED(s)BehaviorMeaning / Possible cause(s)
Lights upThe unit is connected to the Network using a Wireless connection.
Blinking 2
Blinking 3
No light
Blinking 1
Blinking 7
Blinking 5
Blinking 1Indicates that the unit needs confirmation to start the Google Cloud Print™ registration.
Blinking 7
Blinking 8
Blinking 1 (alternate
Yellow and Red)
Indicates that the unit started to connect to the Network using a Wireless connection or WPS (Wi-Fi Protected
Setup) connection.
The unit is not connected to the Network yet.
Indicates that the unit is in Easy Simple Print and there is no connection point.
Connection with Network equipment is not established yet.
Indicates that Wireless connection is Off.
The unit is not connected to the Network.
Indicates that the unit is directly connected to your smartphone/tablet using Easy Simple Print connection.
The unit is connected to the Network using Easy Simple Print.
Indicates that the Network connection has become unavailable and the unit is not currently connected to the
Network.
Indicates that the unit is in process of the Google Cloud Print™ registration.
Proceed to Google account registration and register this unit to your Google account.
Indicates that the WPS connection failed.
The unit detected the Router, but failed to establish a connection.
Indicates a session overlap error.
The session overlap error occurred because two Routers started the Wi-Fi Protection Setup simultaneously.
Indicates that the unit received an identification request for AirPrint.
English
10
Initial operation
Packing contents
1 Unit
2 Setup Manual (Including Safety Sheet and Limited Warranty)
3 Black/Color ink cartridges
(Verité65 XLPlus: XL, Verité65 Mega Plus: 3XL)
4 AC Power cord
Removing packaging material from the unit
•
1
Remove tape and the plastic bag from the unit and then take the
twisted wire from the AC Power cord.
2 Take the Setup Manual off the unit, lift up the Ink door, then
remove the protective paper.
1
1
3
5
BLACK
L
5
L
COLOR
ColorBlack
2
4
Note(s)❏
Missing package contents
• If any of the parts are missing or damaged, please contact an
Authorized Service Center.
Unpack
Remove the unit, ink cartridges, and the AC Power cord from
•
the box.
ACPower cord
Ink Cartridges
Verité 65 XL Plus : XL
Verité 65 Mega Plus : 3XL
L
5
COLOR
ColorBlack
L
5
BLACK
2
3 Open the Scanner lid, then remove the protective paper.
2
1
4 Confirm that the rear cover (Duplex Unit) is correctly installed
before using.
Note(s)❏
How to Remove / Re-Install the Rear Cover (Duplex Unit)
1 Place your fingers in the concave area, then place your thumb
on the gray button, and grasp the Rear cover (Duplex Unit)
lightly.
2 Press the gray button with your thumb. The Rear cover
(Duplex Unit) will be released from the unit by itself.
3 Pull the Rear cover (Duplex Unit) toward you.
4 Confirm that there are no obstacles in the connection, between
the Rear cover (Duplex Unit) and the unit. Then push the Rear
cover (Duplex Unit) back into the unit until the gray button
clicks.
12
English
11
Continued on next page.
Install ink cartridges
2
XL
1
XL
2
XL
2
XL
5 Set the color ink cartridge all the way into the cartridge slot on the
right side.
Install ink cartridges to ink cartridge holder
•
1
Remove the black and color ink cartridges from packaging.
5
BLACK
■■
L
2 Remove the plastic tape on the black and color ink cartridges using
the red pull tab.
DO NOT TOUCH
• DO NOT TOUCH the gold contact area on the back or the
metal nozzles on the bottom of the cartridge.
5
COLOR
■■
L
ColorBlack
Color
Black
(Right)
(Left)
S
S
S
l
l
l
S
S
S
e
e
e
d
d
d
i
i
i
e
e
e
d
d
d
i
i
i
l
l
l
1
2
6 Set the black ink cartridge all the way into the cartridge slot on the
left side.
7 Push and click the Cartridge tab to close the cartridge slot until the
cover snaps securely into position.
3 Lift the Ink door to access the cartridge slot.
1
2
4 Press the Cartridge tab to open the cartridge slot.
C
C
l
l
i
i
c
c
k
k
!
!
8 Close the Ink door.
CAUTIONC
Ink Cartridge Not Inserted Correctly!
• If the Ink door does not close properly, the ink cartridges are
not inserted correctly. Remove the ink cartridges and then
insert them again.
Green
s
s
s
s
e
e
!
!
r
r
P
P
English
12
DO NOT PUSH the green/blue
parts at the same time.
Blue
Continued on next page.
Load paper
Set paper into the paper support
•
1
Reach your hand to the back of the unit, just above the Rear cover
(Duplex Unit), and lift up the center of the Paper Support.
2 Tilt the Paper Support forward, then tilt it backward so that the
Paper Support is fixed in the right position.
3 Pinch the Paper Support Bar at the rectangular cutout on the right
of the Paper Support, and rotate it upward.
7 Open the Paper Exit tray and the exit tray extender.
1
2
3
2
1
4 Slide the paper guide to the left.
5 Fan the plain paper to be printed and then tap the paper sheets so
the ends are the same.
Pull out the Paper Exit tray all the way
before opening the Exit tray extender.
Note(s)❏
Loading Paper
• You can load up to 25 index cards or postcards, 20 glossy paper
sheets or 10 envelopes on the paper support.
Refer to “Print media” on page 26.
»»
Turn On the unit
1 Connect the AC Power cord to the Unit and the AC Outlet.
2 Press and then (Power) LED will light up, when the
unit is turned On.
6 Set the plain paper (Letter or A4 size 20 lb. or 75 g/m
paper support. You can load up to 100 plain paper sheets. Slide the
paper guide firmly against the edge of the paper.
2
2
) into the
English
1
13
Initial setup
English
Español
Français
Language
OK
LCD setup,
Press .
Using PC/Mobile APP,
Detail [ ].
PC/APPNext
Initial setup
OK
OK
Step 1 of 5 :
For best results,
please proceed with
cartridges setup.
Cartridge Setup
OK
NextSkip
Step 2 of 5 :
Test Print
Cartridge Setup
Step 3 of 5 :
Place test print on
the lower right corner
of scanner. Press .
Cartridge Setup
OK
OK
ScanBack
Step 4 of 5 :
Test Scan
Cartridge Setup
Step 5 of 5 :
Cartridge Setup
complete.
Cartridge Setup
OK
Next
Select language
1 Press to select the desired language, then press .
• After initial setup, if you would like to change to another
language, refer to “Language” on page 48.
2 The unit will start printing the alignment pattern.
3 Open the scanner lid and place the alignment pattern paper facing
down and reversed on the scanner glass, then press
closing the scanner lid.
after
Select setup method
1 Press if you continue the Initial setup by using Menu display
on this unit.
• You can also setup by downloading APP with your smartphone/
tablet or PC. Press
with other devices.
to read the explanation how to setup
Cartridge setup
1 [Cartridge Setup] screen will be displayed on the Menu display.
Make sure plain Letter or A4 size paper is loaded in the paper
support, then press
• Make sure to use only blank paper (sold separately).
Never use colored or patterned paper when performing
[Cartridge Setup].
.
&
&
e
e
s
s
r
r
e
e
v
v
e
e
c
c
e
e
a
a
l
l
R
R
p
p
4 The unit will start scanning the alignment pattern to set an
appropriate alignment on this unit.
5 When alignment is completed, [Cartridge Setup complete.]
message will be displayed on the Menu display, then press
.
English
14
Continued on next page.
Wi-Fi Setup
Network and Password
Wi-Fi Protected Setup
Skip
Wi-Fi Setup
OK
Network and Password
Wi-Fi Protected Setup
Skip
Wi-Fi Setup
OK
Router1
Router2
Router3
Router4
Network and Password
Network and Password
Enter Password
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1/+
<>Done
SSID: Router1
Password:
Xaxswordxssdaa123456
Network and Password
OK
ContinueBack
Connected to
Router1
Press to print report.
Press to continue.
Network and Password
OK
OK
Continue
Print
Select Wi-Fi Setup type and follow the Menu display instructions.
Note(s)❏
• By factory default, the DHCP function is set to On, and it
automatically assigns a local IP address to your printer.
• If you would like to set the IP address manually, refer to below.
– You can setup from the Menu Control Panel, then select the
[IP Address]. IP Address...Navigate to [Home > Setup > Wi-Fi
Setup > IP Address] and press
Refer to “Wi-Fi Setup - IP Address” on page 47.
»»
• When performing Network connection, make sure the unit is
not placed too far away from the Access Point/Router and the
Access Point/Router is powered On and its settings are correct.
If you need additional help on Network problems, visit our
website at www.kodakverite.com/support
.
3 [Enter Password] will appear on the Menu display, then enter
Password. Press
After entering the Password, press
then press
.
• If you would like to use capital letters, numbers or symbols, press
to select [a/A/1/+], then press .
• When you enter a wrong letter, then you can erase it by pressing
.
to select a letter, then press .
to select [Done],
4 Confirm the SSID name and Password displayed on the Menu display,
then press
. The unit will start connecting to the Router.
Network and Password
1 If you would like to connect to a Router manually, press
to select [Network and Password], then press
2 SSID names of Routers are listed on the Menu display. Select the
SSID that you would like to connect, then press
• If the SSID that you would like to connect to is not displayed in
the list, select [other] then press
then select the security type of the Router.
Back
Select
OK
. Enter the SSID name,
.
.
5 [Connected to ...] message will appear on the Menu display when
the Connection is successful. Press
setting is completed.
Refer to “Wi-Fi Setup - Network and Password” on page 46.
»»
, then the Connection
English
15
Continued on next page.
Wi-Fi Protected Setup
Network and Password
Wi-Fi Protected Setup
Skip
Wi-Fi Setup
OK
Push WPS buon
on Wi-Fi router.
Geing IP address
W
i-Fi Protected Setup
Cancel
Connected to
Router1
W
i-Fi Protected Setup
OK
Next
Allow printer to
periodically send
anonymous usage
data.
Usage Tracking
OK
AcceptSeings
To improve future
versions of Kodak
printers, allow printer
to periodically send
Usage Tracking
next
anonymous usage data.
For more information:
www.kodakverite.com
Usage Tracking
OK
Accept
Skip
Install Kodak soware
on your PC/Mobile.
Go to kodakverite.com/s
upport.
Finish Printer Setup
OK
1 Press to select [Wi-Fi Protected Setup] then press .
2 Press the WPS button on Router.
*
WPS
WPS
Router1
How long the WPS button must be pressed and other specifics vary
depending on the Router type. Please refer to your Router's manual.
If you would like to setup Wi-Fi later...
1 Press to select [Skip] then
press
.
Wi-Fi Setup
Network and Password
Wi-Fi Protected Setup
Skip
2 Press repeatedly to see the end of the detailed information.
3 If you would like to allow printer to periodically send anonymous
usage data, press
• If you would not like to allow printer to send the data, press
to skip the process.
• If you do not want to setup the Usage Tracking now, you can
setup later after the initial setup is completed.
Refer to “Device Setup - Privacy Settings” on page 49.
»»
.
Wi-Fi Skipped
To install Wi-Fi later,
go to
the Wi-Fi setup menu.
BackContinue
2 Press to go to [Usage Tracking]
screen.
Note(s)❏
• If you do not want to setup the Wi-Fi now, you can setup later
after the initial setup is completed.
Refer to “Wi-Fi Setup” on page 46.
»»
Usage Tracking
1 Press to see the detailed information about Usage Tracking
(Privacy Settings).
4 Press to go to [Home].
English
16
Continued on next page.
Before you download the printer driver to your PC
Requirements
•
Your PC must have one of the following operating systems.
Microsoft® Windows®
OS VersionProcessorBrowserUSB port
Windows® 10
Windows® 8.1
Windows® 8
Windows® 7
Windows® Vista
Windows® Server 2012
Windows® Server 2008
Apple Mac OS
OS VersionProcessorBrowserUSB port
OS X v10.11
(El Capitan)
OS X v10.10
(Yosemite)
OS X v10.9
(Mavericks)
OS X v10.8
(Mountain Lion)
32-bit (x86) or
64-bit (x64)
Intel® Core™
Processor
Microsoft
Edge
Internet
Explorer®
Safari
USB 2.0
High Speed
or
Full Speed
USB 2.0
High Speed
or
Full Speed
How to download the printer driver
•
1
From your PC go to www.kodakverite.com/support and confirm
that the “DOWNLOADS” tab is selected.
2 Select model number from [Select Model Number].
3 Select “Drivers and Software”, then follow the Instructions on your
PC.
Windows10
Extraction of printer driver installer
•
For Windows® users
Compatible
1 Double-click on the downloaded installer file to extract it.
KODAKVERITE65-vxxxxx
Driver’s version
2 If “User Account Control” window appears, click “Yes”.
• Make sure that your PC is turned On and you are logged on with
administrator rights.
• In this Extended User Guide, the file extensions of the programs,
files are omitted. If you set your PC to show the file extensions, the
program and file names appear to be different from those described
in this User Guide.
• In this Extended User Guide, the appearance of the screen images
are based on Windows® 10; however, other operating systems (e.g.,
Windows® 8, etc.) provide basically the same operations. (There
may be programs and functions named differently.)
CAUTIONC
• If there are any programs running, close them first.
• The screens may differ depending on your operating system.
For Mac users
1 Double-click the downloaded installer file to mount it.
KODAKVERITE65-vxxxxx
Driver’s version
English
17
Continued on next page.
2 The following window will appear.
Double-click on [KODAK-VERITE 65 PLUS installer.mpkg].
Note(s)❏
• If the installer does not start when you double-click [KODAK-
VERITE 65 PLUS installer.mpkg], please try the following steps:
1 Select [System Preferences] in the Apple Menu. The Apple
Menu is located on the top left of the screen. Click the Apple
icon to display the pull-down menu.
2 Click [Security & Privacy].
3 Click the [General] tab and you will see the [Allow application
downloaded from:] option. If the setting is locked, please
unlock it. The Lock icon is displayed on the bottom left of the
[Security & Privacy] window. Click the lock icon to unlock.
You may be required to enter the login password to proceed.
4 Select [Anywhere] from options listed. For more information,
visit our FAQ on the website at - www.kodakverite.com/support
2 Click the check box “ Agree”, then click [Next].
3 The following guidance will appear while the PC is searching the Network.
4 If your PC cannot find the unit, the pop-up menu will appear for 5
seconds. Click the instruction for the connection method you have
chosen, then read the help text for more details
.
Install the printer driver to your PC
There are two ways to connect to the unit.
Using Wi-Fi (Recommended)
• When the Network detects the unit, this unit's serial number will
appear on the Menu display.
• Once you double-clicked the printer driver installer, the printer driver
starts to install to your PC through the Wi-Fi connection. Select this
unit's serial number to complete the printer driver installation.
1 Click [Continue].
5 The unit's serial number will appear when the PC finds the unit.
Select the serial number, then click “Next”. The unit's serial number
is located on the sticker on the back side of the unit.
6 The following guidance will appear when the printer driver is
installed to your PC successfully.
• Click “Test print...” to make sure the printer driver installed
properly. (for Windows®)
English
18
Continued on next page.
Using USB Printer cable
• If you have connected between the unit and your PC by using the
USB cable (sold separately), this connection has priority.
• Once you double-clicked the printer driver installer, the printer driver
automatically starts to install to your PC without any guidance.
1 The following guidance will appear when the printer driver is
installed to your PC successfully.
• Click “Test print...” to make sure the printer driver installed
properly. (for Windows®)
Changing connection type to Wi-Fi from USB connection
USB has priority always.
If you would like to change the connection type to Wi-Fi from USB
connection, refer to the following instructions.
Apple Mac OS
1 Follow step 1 of “
USB Printer cable” on page 19.
Install the printer driver to your PC
” for “Using
2 Disconnect the USB cable between this unit and your PC.
3 Activate [System Preferences].
4 Click [Printers & Scanners].
5 Click [+] > [Add printer or Scanner...].
Microsoft® Windows®
1 Disconnect the USB cable between this unit and your PC first.
2 Click [Start].
3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer
re-search].
4 Change the connection type automatically.
6 Click the printer, select the driver from pull-down menu [Use], then
click [Add].
• Make sure to choose FUNAI KODAK VERITE 65 PLUS of
[Bonjour Multifunction] in [Kind].
7 Select [FUNAI KODAK VERITE 65 PLUS] added.
English
19
Continued on next page.
Changing connection type to USB from Wi-Fi connection
If you would like to change the connection type to USB from Wi-Fi
connection, refer to the following instructions.
Microsoft® Windows®
1 Connect the USB cable between this unit and your PC first.
2 Click [Start].
3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer
re-search].
4 Change the connection type automatically.
Apple Mac OS
1 Follow step 1 of “
Wi-Fi (Recommended)” on page 18.
Install the printer driver to your PC
2 Connect the USB cable between this unit and your PC.
3 Activate [System Preferences].
4 Click [Printers & Scanners].
5 Click [+] > [Add printer or Scanner...].
” for “Using
6 Click the printer, select the driver from pull-down menu [Use], then
click [Add].
• Make sure to choose FUNAI KODAK VERITE 65 PLUS of
[USB Multifunction] in [Kind].
7 Select [FUNAI KODAK VERITE 65 PLUS] added.
English
20
Continued on next page.
ECO mode
You can easily save on ink consumption .
ECO mode status
•
ModeInk DensityPrint Size
100%100%
e. g. 4) Layout : 2-up
ECO mode 0 (ECO Off)
80%
100%
SAVE 20%!
ECO mode 1
80%
SAVE 20%!
ECO mode 2
• The current setting mode and the description will appear on the
Menu display.
• In ECO mode 2, the length and width of the print area will be reduced
approx. 94%, resulting in a centered image that is approx. 88% of the
size of the original image.
e. g. 1) Paper Size : Letter
SAVE 30% in total!!
88%
(Reduced 12%)
• Selecting ECO mode, you can automatically save ink and reduce the
size of your print.
• You can also select ECO mode under Printer Preferences of your PC.
• If you set photo print borderless, the print size is not reduced.
• If the printer goes into Sleep mode or is turned Off, ECO mode will
return to its default setting of OFF.
e. g. 2) Poster
e. g. 3) Resizing (Paper : A4 Fit to Paper Size : A5)
English
21
Print using your smartphone/tablet
'Easy Simple Print' can print the data in your smartphone/tablet
directly to the unit.
Printing is also available by using the mobile App for Android™ or
iOS. For more information, read the following requirements and usage
for your smartphone/tablet.
Requirements
•
Your smartphone/tablet must have one of the following operating
systems.
Android™
Use the mobile App
Printing using the print application is available.
How to download the mobile App
•
1
From your mobile device go to www.kodakverite.com/support
2 Confirm that the “DOWNLOADS” tab is selected, then select
model number on this unit from [Select Model Number].
3 Select “Connect your Mobile Device”, then follow the Instructions.
4 Install Printer App on your smartphone/tablet using process
defined by App Site.
OS Version
Android™ 4.0.3
or
later
OS Version
iOS 7.0
or
later
(iPhone,
iPod touch, iPad)
• In order to download the mobile App, you will need a Google
Account or an Apple ID. If you have NFC-supporting device, you
can set the mobile App for Android™ by simply placing your
smartphone/tablet near the NFC tag on the unit.
Refer to “Mobile connection by NFC for Android™” on page 23.
»»
Memory
required
10 MB
more free
space
iOS
Memory
required
30 MB
more free
space
or
or
Required product
specification
Wi-Fi
Required product
specification
Wi-FiBuilt-in camera
Recommended
product specification
Built-in camera
Recommended
product specification
NFC
Note(s)❏
• Connect your mobile to the same Wireless Network that your
unit is using.
5 When the install icon appears on your smartphone/tablet display,
then tap the install icon.
• Please visit our website for more information about the mobile App
- www.kodakverite.com/support
Note(s)❏
English
• The mobile App's name and screen images display the current
version. They may be changed due to updates.
22
Continued on next page.
Mobile connection by NFC for Android™
Mobile connection by (Wireless)
Note(s)❏
• Check whether your Android™ smartphone/tablet supports NFC
first.
1 Place your Android™ smartphone/tablet near the NFC tag on the
unit.
2 Your Android™ smartphone/tablet will be connected to the
website (Play Store) where you can download the mobile App.
3 Install the mobile App.
4 After installation is completed, place your Android™ smartphone/
tablet near the NFC tag again. The mobile App will run and your
Android™ smartphone/tablet will automatically connect to the
unit.
Note(s)❏
• Check whether your smartphone/tablet supports QR code
reading first.
1 Scan the QR code below (or on the Setup Manual) with your
smartphone/tablet and visit the address obtained.
1
2
2 Your smartphone/tablet will be connected to the website (store)
where you can download the mobile App.
3 Install the mobile App.
4 After installation is completed, run the mobile App and follow its
directions and press
smartphone/tablet with the unit.
(Wireless) in order to connect your
•
lighting when the connection is completed.
• From the next time on, you can connect simply by tagging the
NFC once on the unit.
(Wireless) LED will change from blinking to steady
Note(s)❏
• This unit allows you to directly print from your Android™
smartphone/tablet simply by holding your Android™
smartphone/tablet over the NFC tag on the unit.
• Using the NFC does not require installing print driver or
connecting to an Access Point. You will only need an NFC
supported Android™ smartphone/tablet.
• Depending on the material of the Android™ smartphone/tablet
cover, NFC recognition may not work properly. (e.g. Chromium
plating)
• Only Android™ 4.1 or higher will automatically enable the
Wireless direct feature on your Android™ smartphone/tablet
when you enable the NFC feature.
•
lighting when connection is completed.
• If your smartphone/tablet and the unit have already connected
to the same Router (Network), you do not need to press
(Wireless).
• From the next time on, you do not need to scan the QR code.
Simply run the mobile App, then follow its directions and press
unit.
(Wireless) LED will change from blinking to steady
(Wireless) to connect your smartphone/tablet with the
Note(s)❏
• QR code (Quick Response code) is a type of two-dimensional
barcode that can be read using smartphones/tablets.
English
23
Print from a Mobile Device
WPS
This unit supports Google Cloud Print™ and iOS / OS X AirPrint.
Google Cloud Print™
Google Cloud Print™ is a service provided by Google that allows
you to print to the unit registered to your Google account using a
Network-compatible device (such as a smartphone/tablet or PC),
without installing the printer driver on the unit.
Refer to “Google Cloud Print™” on page 50.
»»
Google Cloud Print™
Note(s)❏
• In order to use Google Cloud Print™, you must have a Google
account and sign in to your account.
• Make sure the unit and your smartphone/tablet or PC are
connected to the Internet.
Supported operating systems and applications
Google Cloud Print™ is compatible with the following operating
systems and applications:
Supported operating systems
– Chrome OS™– Android™ 2.1 or later– iOS 3.0 or later
Applications that can be used for printing
– Applications for Chrome OS™– Google Chrome™ browser– Google Drive™ for mobile– Gmail™ webmail service for mobile
• For more information about Google Cloud Print™, visit website at -
www.kodakverite.com/support
AirPrint
With iOS / OS X AirPrint, you can print photos, emails, web pages,
and documents wirelessly from your Apple devices (iPhone, iPod
touch,
iPad).
iOS / OS X AirPrint does not require a driver to be installed.
Refer to “AirPrint” on page 50.
»»
Note(s)❏
• Your Apple devices need to be connected to the same Wireless
Network that your unit is using.
Supported operating systems
Following Apple devices running the latest version:
– iPhone (3GS or later)– iPod touch (3rd generation or later)– iPad (all models)– OS X (v10.7 or later)
• For more information about AirPrint, visit website at -
www.kodakverite.com/support
1
2
3
4
3
1 Click [RESOLUTION CENTER].
4
2 Select model number on this unit.
3 Select [Software - How to].
4 Select [Google Cloud].
English
1
2
1 Click [RESOLUTION CENTER].
2 Select model number on this unit.
3 Select [Mobile].
4 Select [Printing].
24
Check print status from your PC
Status Messenger for Windows®
The Status Messenger application automatically displays an error
when a unit error has occurred. It is installed together with the printer
driver, and is added to the Start-up program by default, so it will
automatically launch at startup. It can also be activated from the
Windows Start Menu. When the Status Messenger is activated, an
icon appears in the Windows® system tray.
Normal state:
Error or Warning:
For example, if there is no paper in the paper support, an error occurs
when you try to print...
A
A pop-up appears from the system tray icon to provide immediate
error notification. If you click on the pop-up, an error recovery guide
appears so that you can confirm a detailed explanation on how to fix
the problem.
Color: Green
Color: Red
Error Message
Insert Paper
Printer: KODAK VERITE 65 PLUS
Click Here For More Information.
Status Messenger Settings
•
To configure the Status Messenger, right click on the icon in the
system tray and select [Settings].
Right click
You can change the following items in the Status Messenger Settings.
• Alert me when a problem prevents printing
When checked: A message will pop up when an error occurs.
• Alert me when my supplies are low
When checked: A message will pop up when information is available.
• Show me detailed status about my supplies.
When checked: Status Monitor Center will be launched by clicking on
the pop-up or the icon in the Windows® system tray.
Settings for pop-up message and detailed information display can be
configured in Status Messenger Settings.
For how to configure the settings, refer to the following instructions.
English
25
Print media
Specifications for print media
You can setup normal printer paper, envelopes or printed documents
(forms) into the paper support.
Paper support
Paper SizesLetter · Legal · Executive · Statement · A4 · JIS B5 · A5 ·
Cards (110 lb. or 200 g/m
Envelopes (24 lb. or 90 g/m
2
): Up to 100
2
): Up to 25
2
): Up to 10
Photo paper (65 lb. or 240 g/m2): Up to 20
• Borderless printing is supported with Paper Sizes Letter, A4, A5, A6,
3x5 in., 4x6 in., 5x7 in., and Hagaki, when printing from your PC.
• Automatic Duplex Printing supports Paper Sizes Letter and A4.
Paper Type must be Plain and 20 lb. (80 g/m
2
).
2
)
2
)
Note(s)❏
Curled Paper
• If paper is curled, use it after flattening paper. 0.08 inches (2
mm) or more curl may cause paper jam.
Storing Paper
• To avoid curling, when you do not use the unit, unused paper is
put into package, please keep it in a flat state. And also, store it
avoiding heat, humidity, and direct sunlight.
CAUTIONC
Unsuitable Paper!
• DO NOT insert any sheets of paper into the paper support…
- that are wet, have been edited with correction fluid, are soiled
or have a coated surface.
- that are held together with office or notebook staples or with
tape or glue.
- that are pasted with note paper.
- that are creased, crumpled or torn
- that are curled.
0.08 inches (2 mm)
or more
Forms from a Laser Printer!
• Forms that have been printed out by a laser printer are not
suitable for further printing.
English
26
Continued on next page.
Insert paper into the paper support
1 Reach your hand to the back of the unit, just above the Rear cover
(Duplex Unit), and lift up the center of the Paper Support.
2 Tilt the Paper Support forward, then tilt it backward so that the
Paper Support is fixed in the right position.
3 Pinch the Paper Support Bar at the rectangular cutout on the right
of the Paper Support, and rotate it upward.
3
2
1
4 Slide the paper guide to left.
7 Paper Detection screen will be displayed in the Menu display.
Press
current settings.
Refer to “Paper Detection” on page 49 .
»»
Paper Size Letter
Paper Type P lain
to change the settings, or press to use the
Paper Detection
Press to use
current settings.
Change
8 If is selected, press to select Paper Size and
Paper Type, then follow the on-screen instructions to configure.
Paper Detection
Letter Plain
Letter Glossy
4x6 in. Glossy
other
Cancel Select
Note(s)❏
• By selecting [other], Paper Size and Paper Type can be
configured separately.
Refer to “Print settings” on page 29 .
»»
9 Open the paper exit tray and exit tray extender.
5 Fan the plain paper to be printed and then tap the paper sheets so
the ends are the same.
6 Insert the paper into the paper support. You can load up to 100
plain paper sheets (20 lb. or 75 g/m
against the edge of the paper.
2
2
). Slide the paper guide firmly
1
1
2
Pull out the Paper Exit tray all the way
before opening the Exit tray extender.
English
27
Continued on next page.
Note(s)❏
Loading Envelopes
• Insert the envelopes into the paper support. You can load up
to 10 envelopes. Place the envelopes with the non-printed side
facing forward in the paper support.
CAUTIONC
• DO NOT reverse the direction when loading envelopes.
Child Safety
• DO NOT pull out the paper support swiftly, otherwise the tray
may fall resulting in injury.
Loading Pre-printed Material
• If you would like to print on an input sheet (for example, forms or
stationery), place the input sheet with the Pre-printed side facing
forward in the paper support.
CAUTIONC
Forms from a Laser Printer!
• Forms that have been printed out by a laser printer are not
suitable for further printing.
English
28
Print settings
Confirming Printing Preferences for Windows®
Note(s)❏
Microsoft® Windows® Screenshots
• The screen shots in this guide were made with Windows® 10. If you
use Windows® OS other than Windows® 10, the screen interfaces
look slightly different. The functions, however, are the same.
Edit print settings
•
When you print a document, the [Print] dialog box appears.
Select [KODAK VERITE 65 PLUS] (this unit) and click on [Properties] or
[Preferences] and such. The changes to the settings only apply to a print
job of the respective application and only until this application is closed.
Select default print setting on the Quick menu
•
You can adjust the default print settings using the [Quick] menu. Click
on [Start] > [Settings] > [Devices] > [Devices and printers].
Right click on the name of the unit and select [Printer properties].
Click on [Preferences...] in the [General] tab.
Note(s)❏
[Devices and printers] on Windows® OS other than Windows® 10
• Right-click at the bottom left corner on your desktop, click [Control Panel],
[Hardware and Sound] and [Devices and Printers] (Windows® 8)
• From the Windows® start menu, click [Devices and Printers]
(Windows® 7).
• From the Windows® start menu, click [Control Panel] > [Hardware
and Sound] > [Printers] (Windows® Vista).
Quick
After you have selected one of the default settings you want to change the
selection will be saved when you click [X] to close the [Quick] menu window.
Edit detailed print setting on the Details menu
•
Click [Details] on the top right corner if you want to change specific
detailed settings.
Change to ECO Mode:
You can easily use less Ink.
[ ]
[
]
[
]
• For more details, refer to “ECO mode” on page 21.
Copies:
Enter the number of copies you would like to print. Activate [Collate],
if you would like to print the copies sorted and not have all the copies
of one page behind each other in succession. Activate [Reverse page order], if you would like to change the print order to print the last
page of your document first.
Paper size:
Select the format of the document.
• Letter (8 1/2 x 11 in)
Letter Borderless
• Legal (8 1/2 x 14 in )
• Executive (7 1/4 x 10 1/2 in)
• Statement (5 1/2 x 8 1/2 in)
• A4 (210 x 297 mm)
A4 Borderless
• JIS B5 (182 x 257 mm)
• A5 (148 x 210 mm)
A5 Borderless
• A6 (105 x 148 mm)
A6 Borderless
ECO mode is not effective.
ECO mode is effective for saving 20% ink.
ECO mode is effective for saving 20% ink and
reducing 12% printed area.
• Postcard (4 x 6 in.)
Postcard (4 x 6 in.) Borderless
• Index Card (3 x 5 in.)
• 5x7 in.(2L) (127 x 178 mm)
5x7 in.(2L) Borderless
• 3.5x5 in.(L) (89 x 127mm)
3.5x5 in.(L) Borderless
• Hagaki (100 x 148 mm)
Hagaki Borderless
• Envelope #10 (4 1/8 x 9 1/2 in)
• Envelope DL (110 x 220mm)
• Envelope C5 (162 x 229mm)
English
Adjusting this setting in the print settings of each application is the best
option as many programs overwrite the settings of the printer driver.
You can also create, edit or delete to manage custom Paper size by
selecting [Manage Custom Sizes...].
Select the print settings automatically according to the paper size.]
[
can be selected depend on the paper size.
Color Output:
Select print output from [Color] or [Black and white].
[Color]Color print
[Black and white]Black-and-white print
29
Continued on next page.
Paper type:
Select the desired Paper type. Ensure that the selected Paper size is used.
Note(s)❏
• Automatic Duplex Printing only supports Paper Size Letter and
A4 with Paper Type [Plain]. With other settings, Automatic
Duplex Printing is not available.
Print Quality:
Select the Quality settings to match the document type to be printed.
You can select the type of Print Quality [Auto/Draft/Normal/Best].
[Auto (default)]Printing with a quality suitable for the Paper
type that is selected.
[Draft]High-speed printing, but low image quality.
[Normal]Standard speed printing and image quality.
[Best]Highest quality image, but printing speed is low.
Sharpen:
Adds sharpness to the image.
[On]Activates Sharpen.
[Off]Deactivates Sharpen.
Collate:
The Collate feature controls the order of printed pages when printing
multiple copies of a document. For example, if you are printing two
copies of a five-page document, then the page order of the collated
output would be 1, 2, 3, 4, 5, 1, 2, 3, 4, 5. The page order of the noncollated output would be 1, 1, 2, 2, 3, 3, 4, 4, 5, 5.
[On]Activates Collate
[Off]Deactivates Collate
Reverse page order:
[On]Print from the last page.
[Off]Print from the first page.
Note(s)❏
When [Manual 2-sided long edge] or [Manual 2-sided short edge] is
selected.
• You must manually turn the stack of printed pages over and place
them in the paper support. Before placing the pages with the front
printed sides in the paper support, make sure of the following items to
avoid a paper jam or double-feed:
– All other paper (unused paper) has been removed from the paper support.– The ink is completely dry.– The paper is not curled or creased. If it is, flatten the paper.– Align the corners of the paper.– A paper jam or double-feed may occur if the paper is in a bad condition
or the printed page is placed incorrectly.
– Maximum number of sheets by Paper type:
Plain paper (20 lb.): 50 sheets (100 pages)
Postcard:25 sheets
Page Layouts:
[Normal]Prints the Normal printing.
[Multiple pages
per side (N-Up)]
Prints Multiple pages on one side of a paper for
the page layout.
[Poster]Prints a document in a larger format. The Poster
option lets you enlarge a print job to several
times the standard size.
[Mirror]Prints a horizontally flipped document
Note(s)❏
When [Poster] is selected.
• Depending on the poster size that you select, your document is
divided into an equal number of sections, each of which prints
on a full sheet of paper. When all sections have printed, you
can trim the extra white space around each page and join the
individual sheets to create a poster.
Supported size of poster - 2 x 2 (4 pages), 3 x 3 (9 pages), or 4 x
4 (16 pages).
Page Orientation:
This function allows you to select the direction of printing on a
page. You can set whether to print in Portrait or Landscape format.
Adjusting this setting in the print settings of the application is the
best option as many programs overwrite the settings of the printer
driver.
[Portrait]Portrait indicates vertical orientation, where the
If you would like to resize the printing document, click on [On].
[On]Resizes the printing document to the selected
Paper size.
[Off]Does not resize. Keep the document size.
2-sided printing:
You can select whether to print on one side only or print on both
sides. For both sides printing, you can also select whether the binding
position is along the long edge or the short edge of the paper.
[1-sided]Prints on one side.
[2-sided long edge] Prints on both sides with a margin of long edge.
[2-sided short edge] Prints on both sides with a margin of short
edge.
[Manual 2-sided
long edge]
[Manual 2-sided
short edge]
Prints manually on both sides with a margin of
long edge.
Prints manually on both sides with a margin of
short edge.
English
30
Continued on next page.
Watermark:
You can choose a watermark from three modes. (Same watermark on
all pages, a different watermark on first page, or a different watermark
on odd/even pages.) Select a watermark that you would like to add
to your print job.
[Use the same watermark on all pages]
• (None)
• Confidential
• Draft
[First page]
You can choose the same selection above ([(None)] to [Date and
Time]) on the first page.
[Other pages]
You can choose the same selection above ([(None)] to [Date and
Time]) on the other pages.
To add or remove watermark, click on [Edit Watermarks].
• Username
• Date and Time
Confirming Print Settings for Mac
Note(s)❏
Macintosh Screenshots
• The screen shots in this guide were made with the Preview
(Applications) of OS X 10.11. If you use another version of OS
X or another application, the screen interfaces look slightly
different. The functions, however, are the same.
Save Detail changes
•
Click on [Save] on the [Details] settings in the top left corner to save
the changes to the respective register.
The saved configuration information will be managed by names.
You can type the substitute name for [Custom 1] when [Save Print Settings] windows appears.
Click on [Quick] or [X] to close the [Details] settings window
without saving.
Delete Custom settings
•
You can delete custom settings by Quick menu. Select the one of the
registered settings, then click [Delete].
Paper Size:
Select the format of the document. Adjusting this setting in the print
settings of each application is the best option as many programs
overwrite the settings of the printer driver. You can also create and
manage custom Paper Size by selecting [Manage Custom Sizes...].
Note(s)❏
• Automatic Duplex Printing only supports Paper Size Letter and
A4 with Paper Type [Plain]. With other settings, Automatic
Duplex Printing is not available.
Orientation:
Choose Portrait or Landscape output.
Edit Print Settings for a print job
•
When you print a document, follow the Steps below.
1 Open the file you want to print.
2 Select [File] on the menu bar.
3 Select [Print...], then the Printer Setting menu will be displayed.
4 If details are not displayed, select [Show Details] on the bottom
of the Print Menu. You can edit Print Settings when details are
displayed.
English
31
Continued on next page.
Save changes
•
1
Click on [Presets] list box, and select [Save Current Settings as
Preset...]. The saved configuration information will be managed by
names.
2 Input name in [Preset Name:] textbox, then select [Preset Available
For:] radio button.
3 Click on [OK] to save and close the window.
4 Select [Cancel] to close window without saving.
Load settings
•
• You can access the saved settings quickly by selecting a name
from [Show Presets...] in [Presets] list box.
Change Print options
•
• In the Print Setting menu, select the Print options you want to
change in the red frame below.
Layout
•
Pages per Sheet:
Print multiple pages on one sheet.
Layout Direction:
If you print multiple pages on a sheet, select the layout direction.
Border:
Print the border on the sheet.
Reverse page orientation: If you would like to reverse page
orientation, select the checkbox.
Flip horizontally:
If you would like to flip horizontally, select the checkbox.
Preview
Auto Rotate:
Automatically selects portrait or landscape.
Scale:
Enter the scaling ratio.
Scale to Fit:
Input the scaling ratio of [Print Entire Image] or [Fill Entire Paper]
automatically.
Copies per page(s):
Print multiple copies of the page(s).
Paper Handling
•
Pages to Print:
If you would like to print odd/even pages only, select [Odd only] or
[Even only].
Page Order:
If you would like to print in reverse order, select [Reverse].
Scale to fit paper size:
If you would like to scale to fit your printer paper, select the checkbox
and select [Destination Paper Size].
Destination Paper Size:
Select the Paper Size to scale.
Scale down only:
If you don’t want to scale up, select the checkbox.
English
32
Continued on next page.
Cover Page
•
If necessary, you can print the cover page.
Print Cover Page:
If you would like to print the cover page, select [Before document] or
[After document].
Cover Page Type:
If you would like to print the cover page, select the cover page type.
Quality & Media
•
Print Quality:
Select the Quality settings to match the document type to be
printed. You can select the type of Print Quality [Auto/Draft/
Normal/Best].
[Auto]Printing with a quality suitable for the Paper Type
[Draft]High-speed printing, but low image quality.
[Normal] Standard speed printing and image quality.
[Best]Highest quality image, but printing speed is low.
Paper Type:
Select the desired Paper Type. Ensure that the selected Paper Size is
used.
Note(s)❏
• Automatic Duplex Printing only supports Paper Size Letter and
Sharpen:
Activate Sharpen, if you would like to add sharpness to the image.
Advanced Options
•
Color Output: Select print output from [Color] or [Black and White].
that is selected.
A4 with Paper Type [Plain]. With other settings, Automatic
Duplex Printing is not available.
English
33
Using Menu display
Making copies
1 From the Control panel, use
to navigate the desired settings, and press
.
2 From the Setting screen, press
to scroll to the setting you would like to
set, and then press
Use
then press
to select among settings,
to confirm the selection.
.
Home
Home
Copy
Copy Setting
Ink Levels
Scan
Copy
e.g.) Copy Setting
Copy Setting
Copies 1
Color Color
Quality Text
Resize 100%
BackCopy
The copy function is available usingon the unit.
1 Lift the scanner lid on the unit.
2 Load the original print side down on the scanner glass.
3 Close the scanner lid.
4 Specify the settings as necessary.
Refer to “Copy setting” on page 35 for its settings.
»»
5 Press .
6 The unit will start copying.
• To cancel copy, press
Direction of the copy
• Document is being copied as described above, printed copy
comes out as shown below.
.
English
34
Continued on next page.
Copy Setting
Copies
•
Set the number of Copies.
1 From the Control panel, navigate to
[Home > Copy Setting > Copies], then
press
.
Copy Setting
Copies 1
Color Color
Quality Text
Resize 100%
BackCopy
Quality
•
Set the copy Quality.
1 From the Control panel, navigate to
[Home > Copy Setting > Quality], then
press
.
Copy Setting
Copies 1
Color Color
Quality Text
Resize 100%
BackCopy
2 Select the number of Copies [1] to [99].
Use
Copies or
of Copies.
to increase the number of
to decrease the number
3 Press .
Note(s)❏
• Each time you press at
Step 2 for a few seconds, the number of
Copies will increase or decrease by 10
Copies.
Color
•
Set the copy Color setting.
1 From the Control panel, navigate to
[Home > Copy Setting > Color], then press
.
2 Press to select the copy Color
setting.
• Color• Black/White
3 Press to confirm.
Copies
Set number of copies.
UP
1
Down
Cancel Select
Copy Setting
Copies 1
Color Color
Quality Text
Resize 100%
BackCopy
Color Select
Color
Black/White
Cancel Select
2 Press to select the copy
Quality.
• Text
• Text/Photo
• Photo
• Draft
3 Press to confirm.
Resize
•
Set the Resize for enlarging or compressing
the copy document.
* You can select custom Resize range from 25% to 400%. Press
to select the Resize value. The default value is 100%.
3 Press to confirm.
CAUTIONC
• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].
Note(s)❏
• Each time you press and hold under [Custom Size]
a few seconds, the Resize value will increase or decrease by 10%.
35
Continued on next page.
Paper Size
•
Set the Paper Size for the copy document.
1 From the Control panel, navigate to
[Home > Copy Setting > Paper Size], then
press
.
Copy Setting
Color Color
Quality Text
Resize 100%
Paper Size Letter
BackCopy
Pages per Side
•
You can copy multiple pages on one sheet
by printing smaller images of each page.
1 Lift the scanner lid on the unit.
2 Load the original print side down on the
scanner glass.
3 Close the scanner lid.
Copy Setting
Resize 100%
Paper Size Letter
Paper Type Plain
Pages per Side One
BackCopy
2 Press to select the Paper Size.
• Letter
• Legal
• JIS B5
• A4
• Executive
• A5
• Statement
• A6
• 3 x 5 in.
• 4 x 6 in.
• 5 x 7 in.
• Hagaki
• 3.5 x 5 in.(L)
• 10 Envelope
• DL Envelope
• C5 Envelope
3 Press to confirm.
Paper Type
•
Set the Paper Type.
1 From the Control panel, navigate to
[Home > Copy Setting > Paper Type] and
press
.
2 Press to select the Paper
Type.
• Plain
• Labels
• Glossy Photo
• Matte Photo
• Envelope
3 Press to confirm.
Copy Paper Size
Letter
Legal
JIS B5
A4
Cancel Select
Copy Setting
Quality Text
Resize 100%
Paper Size Letter
Paper Type Plain
BackCopy
Copy Paper Type
Plain
Labels
Envelope
Glossy Photo
Cancel Select
4 From the Control panel, navigate to
4
Copy Pages per Side
One
2 in 1 Portrait
2 in 1 Landscape
4 in 1 Portrait
Cancel Select
2
1
[Home > Copy Setting > Pages per Side],
then press
.
5 Press to select from the
following printing option.
• One
• 2 in 1 Portrait
• 2 in 1 Landscape
2 in 1 Portrait2 in 1 Landscape4 in 1 Portrait4in 1 Landscape
21
• 4 in 1 Portrait
• 4 in 1 Landscape
1
2
12
3
Note(s)❏
• If the document for printing is vertically oriented, select the
Portrait. Otherwise, select the Landscape.
6 Press .
7 Press , to start scanning the first
page.
8 On the Menu display, [Would you like
to include another page?] message will
appear. If you have the next page ready to
scan, press
• If you press
start the copying process with only the
scanned data up to that point.
.
here, the unit will
Copy Pages per Side
Would you like to
include another page?
No Include
9 Remove the first page from the scanner
glass and place the next page.
10 Pressto continue to scan the next
page. Repeat this until you have scanned
all the pages.
Copy Pages per Side
Place next page on
Flatbed Scanner and
to continue.
press
Start
43
English
36
CAUTIONC
• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].
Continued on next page.
Brightness
•
Set the level of Brightness.
1 From the Control panel, navigate to
[Home > Copy Setting > Brightness], then
press
• Press
Brightness of your copy document from
5 levels.
.
to adjust the
Copy Setting
Paper Size Letter
Paper Type Plain
Pages per Side One
Brightness 3
BackCopy
Check ink levels
Ink levels
•
From the Control panel, navigate to
[Home > Ink Levels] and press
Home
Copy
.
Copy Setting
Ink Levels
Scan
Copy
2 Press to confirm the setting.
ID Card Copy
•
You can copy both sides of a small document
(e.g. ID card, business card) onto one page.
Note(s)❏
• This function is valid only with Letter or
A4 size paper.
1 Load plain Letter or A4 size paper on the
paper support.
2 From the Control panel, navigate to
[Home > Copy Setting > ID Card Copy],
then press
.
3 Lift the scanner lid on the unit.
4 Place the front side of the ID card facedown
on the scanner glass in the lower right
placement corner with arrows, then press
.
Brightness
Light
3
Dark
CancelSelect
Copy Setting
Paper Type Plain
Pages per Side One
Brightness 3
ID Card Copy
BackCopy
ID Card Copy
Use Letter or A4 paper.
Place ID card on
the lower right corner
of scanner and press
Cancel Start
Ink Levels
BlackColor
Back
.
5 Place the back side of the ID card facedown
on the scanner glass in the lower right
placement corner with arrows and then
press
.
6 Copying process will start.
ID Card Copy
Copy the back side of
the ID Card?
Skip Copy
Note(s)❏
• In the following cases, copy settings are not saved and the
settings will be reset to default.
– When you return to the [Home] setting by pressing
• If you have changed the Paper Settings in the Setup Menu, the
default value of Paper Settings in the Copy Menu will also be
changed.
English
.
37
Continued on next page.
Copy in [Copy] application by Windows®
The copy function is also available using application by Windows®.
Copies
•
Set the number of Copies.
Paper Size
•
Set the Paper Size for the copy document from pull-down menu.
• Letter
• Legal
• Executive
• Statement
• A4
• JIS B5
• A5
• A6
Paper Type
•
Set the Paper Type from pull-down menu.
• Plain
• Labels
• Envelope
Brightness
•
Set the level of Brightness. Adjust the slider to the right to get
brighter and to the left to get darker.
Resize
•
Set the Resize for enlarging or compressing the copy document from
pull-down menu.
• 100% Default
• 130% Letter->Legal
• 104% Executive->Letter
• 97% Letter->A4
• 93% A4->Letter
• 85% Letter->Executive
• Custom*
* You can select custom Resize range from 25% to 400%.
Enter the number [1] to [99] directly in the box,
click [+] or [-] to select the Resize value. The default value is
100%.
• Postcard (4 x 6 in.)
• Index Card (3 x 5 in.)
• 5x7 in. (2L)
• 3.5x5 in. (L)
• Hagaki
• Envelope #10
• Envelope DL
• Envelope C5
• Glossy Photo
• Matte Photo
1 Select the number of copies [1] to [99].
Enter the number [1] to [99] directly in the box,
or click [+] to increase the number of copies or [-] to decrease the
number of Copies.
2 Click [Copy] or press .
Color
•
Set the copy Color setting.
1 Click [Document Color] or [Black and White], or choose from
pull-down menu.
• Color• Black and White
Quality
•
Set the copy Quality from pull-down menu.
• Text
• Text/Photo
• Photo
• Draft
CAUTIONC
• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].
Pages per Side
•
You can copy multiple pages on one sheet by printing smaller images
of each page.
1 Lift the scanner lid on the unit.
2 Load the original print side down on the scanner glass.
3 Close the scanner lid.
4 Click either printing option
• One
• 2 in 1 Portrait
• 2 in 1 Landscape
2 in 1 Portrait2 in 1 Landscape4 in 1 Portrait4in 1 Landscape
21
• 4 in 1 Portrait
• 4 in 1 Landscape
1
2
12
3
2
4
1
43
English
38
Continued on next page.
5 Click [Copy] or press .
6 Remove the first page from the scanner glass and place the next page.
7 Click [Copy] or press to continue to scan the next page.
Repeat this until you have scanned all the pages.
CAUTIONC
• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].
ID Card Copy
•
You can copy both sides of a small document (e.g. ID card, business
card) onto one page.
Scanner
You can use a variety of scanner functions from your smartphone/tablet
or PC. The “Scanning” application is available if your PC has a Windows®
platform.
The scanner function is also available by using an application called
“Image Capture” bundled as a default for OS X.
Or the mobile App for Android™ and iOS. For information on the mobile
App, refer to “Print using your smartphone/tablet” on page 22.
Note(s)❏
• You cannot use the scan function directly with this unit.
• Load the original print side down on the scanner glass. Make sure
to align the original print to the lower right corner of the scanner
glass with arrow marks.
Note(s)❏
• This function is valid only with Letter or A4 size paper.
1 Click [Start ID Card Copy].
2 Load plain Letter or A4 size paper on the paper support.
3 Lift the scanner lid on the unit.
4 Place the front side of the ID card facedown on the scanner glass in
the lower right placement corner with arrows and then Click [Copy]
or press
, then Copying process will start.
5 Lift the scanner lid on the unit, flip ID card over and click [Copy] or
press
.
• The readable area of the scanner is not equal to the area of the
scanner glass. Therefore, when placing the document in the
lower right corner of the scanner the edges of the document may
not be scanned.
• 0.079 inch (2 mm) missing in the short side, and 0.024 inch (0.6
mm) missing in the long side of the scan area.
Note(s)❏
• If you have changed the Paper Settings in the Setup Menu, the
default value of Paper Settings in the Copy Menu will also be
changed.
English
39
Continued on next page.
Scan in [Scanning] application by Windows®
Run [Scanning] from the [Start] menu as it appears in the window below.
Click [Scan] and will start the scanning.
Settings
If you would like to change the settings, click [Details].
Color Depth:
Select the scan Color Depth from below:
• Gray• Black and white• Color
Content Type:
Specify the Content Type of the scan document from below:
• Text• Text/Graphics• Photo
Scan:
Starts Scan.
Brightness:
Select the Brightness level. Adjust the bar toward the left end to set
the reproduction darker. Adjust the bar toward the right end to set
the reproduction lighter. The Brightness level will be reflected on the
scanned data.
Contrast:
Select the Contrast level. Adjust the bar toward the left end to reduce
the Contrast. Adjust the bar toward the right end to increase the
contrast. The Contrast level will be reflected on the scanned data.
Background Removal:
Select Background Removal to remove the background on the
scan data. The Background Removal feature adjusts the amount of
background that is visible on the scanned data.
Save to Folder:
If you would like to change the saving folder for a scanned file to
another folder, click [Save to Folder...].
Paper Size:
Select the Paper Size from below:
• Letter
• Executive
• Statement
• A4
• JIS B5
• A5
• A6
• Postcard (4 x 6 in.)
Scan Resolution:
Select the scan Resolution from below:
• 75 dpi
• 100 dpi
• 150 dpi
• 200 dpi
• Index Card (3 x 5 in.)
• 5x7 in. (2L)
• 3.5x5 in. (L)
• Hagaki
• Envelope #10
• Envelope DL
• Envelope C5
• 300 dpi
• 600 dpi
Note(s)❏
• Scanning at 2400 dpi or more is available on the “High
Resolution Scanning” application included with the Software.
• 1200 dpi
1 Click on [Save to Folder...], then [Browse For Folder] will
appear.
2 Select the folder you want to save the scanned file to, then click
[OK].
3 The scanned file will save to the selected folder.
· The folder you have chosen is automatically selected from the
next time. Perform Step
file to another folder.
and 2 if you want to save the scanned
1
English
40
Continued on next page.
Scan in Mac
Run the Image Capture application. (Scanning with other applications
such as “Preview” is a very similar process.)
Simplified scan mode
•
In the “Simplified” scanner interface, follow these Steps:
1 Place the document you would like to scan on the scanner glass.
2 Open Image Capture located in the Applications folder.
3 Select this unit from list of devices.
4 Select the desired destination where the scanned document is
to be saved from the [Scan To] pop-up menu.
5 Click [Scan] to scan.
6 A preview will appear on your monitor when scanning is
completed.
Resolution:
Select the scan Resolution from below:
• 75 dpi
• 100 dpi
– Select the [Use Custom Size] checkbox to enable the [Size]
fields to specify the width and height you want to scan. Select
pixels, inches or cm (centimeters).
• 150 dpi
• 200 dpi
• 300 dpi
• 600 dpi
• 1200 dpi
Advanced scanning options
•
In the “simplified” scanner interface, click [Show Details] if you want
to enter a detailed scan mode with more advanced options.
Kind:
Select the scan color depth from below:
• Color• Black & White• Text
– Choose “Color” to scan an object in Color.– Choose “Black & White” to scan an object in Grayscale (256 or
Thousands of grays).
– Choose “Text” to scan text documents.
Rotation Angle:
Set the number of degrees for the clockwise rotation of your scanned
image.
Auto Selection:
Choose one of the following from the [Auto selection] pop-up menu.
[Off] – to normally select the object.
[Detect Separate Items] – to automatically select and
straighten the objects you are
scanning.
[Detect Enclosing Box]– to include all the items on the
scanner bed in one image.
Scan To:
Select the desired destination where the scanned document is to be
saved.
English
41
Continued on next page.
Name:
Enter the name of scanned images. For multiple scans, the name
entered will be a part of incrementally named scans. For example,
enter “doc”, and the names of the scanned images will be “doc1.jpeg”,
“doc2.jpeg”, and so forth.
Format:
Select the image format of the scan from below:
• JPEG
• TIFF
• PNG
-
[Combine into single document] is only available when the
format TIFF or PDF is selected. In order to save multiple pages
as a single file, select the checkbox.
Image Correction:
When [Manual] is selected, the adjustment of the following
parameters are possible.
Document Type:
Select the type of document to be scanned from below:
• Text Only• Photo• Mixed Graphics
• JPEG 2000
• GIF
• BMP
• PDF
When choosing [Color] in [Kind:]
[Brightness] – to adjust the balance between light and dark.
[Tint] – to adjust the color balance between red and
green.
[Temperature] – to adjust the color balance of warm and cool.
[Saturation] – to adjust the vividness of colors.
When choosing [Black & White] in [Kind:]
[Brightness] – to adjust the balance between light and dark.
[Contrast] – to adjust the balance of sharpness and
softness.
When choosing [Text] in [Kind:]
– [Threshold] to adjust the transition point between dark and light.
Note(s)❏
• Those images are created based on the screen of OS X 10.11.
If the version of the OS is different or the OS is updated, it is
possible that the display on the screen has changed.
English
42
Settings
You can setup the unit as you like depending on your needs.
Maintenance
You can perform maintenance operations for the ink cartridge.
Clean Printhead
•
1
From the Control panel, navigate to
[Home > Setup > Maintenance], then press
.
2 Press to select [Clean
Printhead], then press
3 Load plain Letter or A4 -size paper.
.
Maintenance
Clean Printhead
Cartridge Setup
Back Select
4 The unit will start printing the alignment
pattern.
• The
blink rapidly. LED lighting pattern is
“Blinking 5”.
Refer to “Meaning of LED behavior and lights”
»»
on page 9.
(Power) LED will light up then
Cartridge Setup
Step 2 of 5 :
Test Print
4 Press to start cleaning the printhead.
5 A page prints, forcing ink through the ink
cartridge nozzles to clean them.
6 Print the document again to verify that the
print quality has improved.
Cartridge Setup
•
Print the alignment pattern for alignment
adjustment. By reading the pattern with the
scanner, the printer alignment is optimized
and the print quality will be better.
1 From the Control panel, navigate to
[Home > Setup > Maintenance], then press
.
2 Press to select [Cartridge
Setup], then press
.
3 [Cartridge Setup] screen will be displayed
on the Menu display. Make sure plain Letter
or A4 -size paper is loaded in the paper
support, then press
.
Clean Printhead
Please insert
Letter or A4 paper
and press
Cancel Start
Clean Printhead
Cleaning...
Maintenance
Clean Printhead
Cartridge Setup
Back Select
Cartridge Setup
Step 1 of 5 :
For best results,
please proceed with
cartridges setup.
Cancel Next
5 Open the scanner lid on the unit. Load the
.
front side of the alignment pattern result
facedown at the placement corner of the
scanner glass (see below), then press
to start the alignment adjustment
after closing the scanner lid.
Cartridge Setup
Step 3 of 5 :
Place test print on
the lower right corner
of scanner. Press
Back Scan
.
6 The unit will start scanning the alignment
pattern to set an appropriate alignment on
this unit.
Cartridge Setup
Step 4 of 5 :
Test Scan
7 When alignment is completed, [Alignment
successful.] message will be displayed on
the Menu display, then press
.
Cartridge Setup
Step 5 of 5 :
Alignment successful.
Press
.
English
43
Continued on next page.
Paper Setup
Sets the Paper Type and Paper Size.
Note(s)❏
• If you change the following Paper Settings, the default paper
setting values in the Copy Menu will also be changed.
• If the print setting “Paper Setup” and selected Paper Size/Paper
Type do not match, the message “Press
setting.” will be displayed in the Menu display. Press
continue printing.
Paper Setting Mismatch
Press to print
with print setting.
Paper Size 4x6 in.
Paper Type Glossy
Cancel Print
Paper Size
•
Set the Paper Size for the copy document.
1 From the Control panel, navigate to
[Home > Setup > Paper Setup > Paper
Size], then press
.
2 Press to select the Paper Size.
• Letter
• Legal
• JIS B5
• A4
• Executive
• A5
• Statement
• A6
• 3 x 5 in.
• 4 x 6 in.
• 5 x 7 in.
• Hagaki
• 3.5 x 5 in.(L)
• 10 Envelope
• DL Envelope
• C5 Envelope
3 Press to confirm.
to print with print
Paper Setup
Paper Size Letter
Paper Type Plain
Back Select
Paper Size
Letter
Legal
JIS B5
A4
Cancel Select
to
Paper Type
•
1
From the Control panel, navigate to
[Home > Setup > Paper Setup > Paper
Type], then press
.
2 Press to select the Paper Type.
• Plain
• Labels
• Envelope
• Glossy Photo
• Matte Photo
3 Press to confirm.
Note(s)❏
• Automatic Duplex Printing only supports
Paper Size Letter and A4 with Paper Type
[Plain]. With other settings, Automatic
Duplex Printing is not available.
• If settings other than Paper Type Plain
are selected, the message [Auto 2-sided
printing supports Plain paper type only.]
will be displayed in the Menu display.
Press
change the settings.
to continue. Pressto
Paper Setup
Paper Size Letter
Paper Type Plain
Back Select
Paper Type
Plain
Labels
Envelope
Glossy Photo
Cancel Select
Paper Type
Auto 2-sided printing
supports Plain paper
type only.
Cancel
Note(s)❏
• Automatic Duplex Printing only supports
Paper Size Letter and A4 with Paper Type
[Plain]. With other settings, Automatic
Duplex Printing is not available.
• If settings other than Paper Size Letter
or A4 are selected, the message [Auto
2-sided printing supports Letter or A4
paper sizes only.] will be displayed in the
Menu display. Press
Press
to change the settings.
to continue.
Paper Size
Auto 2-sided printing
supports Letter or A4
paper sizes only.
Cancel
English
44
Continued on next page.
Network Status
You can check the following settings for the Network/Router
connection status.
Connection
•
1
From the Control panel, navigate to [Home
> Setup > Network Status > Connection],
then press
2 The Wireless Connection status is
displayed. [Connected] or [Disconnected]
will be shown on the screen.
.
Network Status
Connection
Signal Quality
Security
IP Address
Back Select
Back
Connection
Connected
2 The Wireless security type is displayed.
[Open], [WEP-64], [WEP-128], [WPA/
WPA2-PSK] or [WPA2-PSK] will be shown
on the Menu display.
IP Address
•
1
From the Control panel, navigate to [Home
> Setup > Network Status > IP Address],
then press
.
Security
WPA2-PSK
Back
Network Status
Connection
Signal Quality
Security
IP Address
Back Select
Signal Quality
•
1
From the Control panel, navigate to [Home
> Setup > Network Status > Signal Quality],
then press
.
2 The Wireless signal quality is displayed.
[No Signal] or 8 levels of signal will be
shown on the screen.
Security
•
1
From the Control panel, navigate to [Home
> Setup > Network Status > Security], then
press
.
Network Status
Connection
Signal Quality
Security
IP Address
Back Select
Signal Quality
Signal Level
Infrastructure
Low High
Back Refresh
Network Status
Connection
Signal Quality
Security
IP Address
Back Select
2 The IP address is displayed on the screen.
– The
XXX.XXX.XXX.XXX
IP address of your unit.
MAC Address
•
1
From the Control panel, navigate to [Home
> Setup > Network Status > MAC Address],
then press
.
represents the
2 The MAC address is displayed on the
screen.
– The
XX-XX-XX-XX-XX-XX
the MAC address of your unit.
represents
IP Address
XXX.XXX.XXX.XXX
Back
Network Status
Signal Quality
Security
IP Address
MAC Address
Back Select
MAC Address
XX-XX-XX-XX-XX-XX
Back
English
45
Continued on next page.
Wi-Fi Setup
You can set the following Wi-Fi settings.
Network and Password
•
If you would like to connect to a Router
manually, follow the Steps below.
1 From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Network and
Password], then press
2 Press Select the SSID that you
would like to connect, then press
• If it is not displayed the SSID that you
would like to connect in the list, select
[other] then press
name, then select the security type of the
Router.
Refer to “Manual SSID Setting” on page
»»
46.
3 Enter Password. Press to
select letters, numbers and symbols, then
press
.
– When you enter a wrong text character,
then you can erase it by pressing
– To change the characters, press
to select [a/A/1/+], then press
repeatedly until the character you
want to enter.
4 After entering the Password, press
to select [Done], then press
.
.
.
. Enter the SSID
.
Wi-Fi Setup
Network and Password
Wi-Fi Protected Setup
IP Address
Proxy
Back Select
Network and Password
Router1
Router2
Router3
Router4
Back Select
Network and Password
Enter Password
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1/+
<>Done
Network and Password
XXXXXXXXXXXXX
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1/+
<>
Done
Manual SSID Setting
1 Enter SSID name of your Router.
Press
numbers and symbols, then press
– When you enter a wrong text character,
then you can erase it by pressing
– To change the characters, press
to select [a/A/1/+], then press
repeatedly until the character you
want to enter.
to select letters,
2 After entering the SSID name, press
to select [Done], then press
.
– Press to select the security
type of the Router, then press
Note(s)❏
• When you enter the same SSID name
manually that you previously used
on this unit, the security type is set
automatically.
Wi-Fi Protected Setup
•
1
From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Wi-Fi Protected
Setup], then press
.
Network and Password
Enter SSID
.
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1/+
.
.
<>Done
Network and Password
*****************
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1/+
<>
Network and Password
Open
WEP-64
WEP-128
WPA/WPA2-PSK
Back Select
Network and Password
Wi-Fi Protected Setup
IP Address
Proxy
Back Select
Done
Wi-Fi Setup
5 Confirm the SSID name and Password
displayed on the Menu display, then press
. The unit will start connecting to the
Router.
6 [Connected to...] message will appear on
the Menu display when the connection
is successful. Press
connection setting is completed.
English
, then the
Network and Password
SSID: XXXXXXX
Password:
XXXXXXXXXXXXX
Back Continue
Network and Password
Connected to
Router1
to print report.
Press
Press to continue.
Print Continue
2 Press WPS button on the Router.
3 [Connected to XXXXXXXX] appears on
the Menu display, WPS (Wi-Fi Protected
Setup) is completed.
– The
XXXXXXXX
represents the SSID of
your Router.
4 Press on [Wi-Fi Setup] screen.
46
Wi-Fi Protected Setup
Push WPS button
on Wi-Fi router.
120
Cancel
Wi-Fi Protected Setup
Connected to
XXXXXXXX
Next
Continued on next page.
IP Address
•
1
From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > IP Address], then
press
.
Wi-Fi Setup
Network and Password
Wi-Fi Protected Setup
IP Address
Proxy
Back Select
Proxy
•
1
From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Proxy], then press
.
Wi-Fi Setup
Network and Password
Wi-Fi Protected Setup
IP Address
Proxy
Back Select
2 Press to select [Auto] or
[Manual], then press
[Auto] DHCP mode
It's easy to Automatically get the IP address
of this unit from the Network.
[Manual] Static mode
Set the Network address manually.
.
3 If you select [Manual], set the items below.
• IP Address
• Subnet Mask
– Press
Address], [Subnet Mask], [Gateway]
or [DNS], then press
– Set digits one at a time. Press
to select from [0] to [9], then
press
– When you enter a wrong number, then
you can correct it by pressing
– After you select the last digit, then press
to set IP Address and return to
the previous screen.
• Default Gateway
• DNS
to select [IP
.
.
.
IP Address
Auto
Manual
Back Select
IP Address
IP Address
Subnet Mask
Gateway
DNS
Back Select
e.g.) [IP Address] screen
IP Address
192 . 168 . 011 . XXX
Back Select
2 Proxy has 3 setup items.
Press
[Address] or [Port], then press
Proxy
Press
then press
Address
Enter proxy address. Press
select letters, numbers and symbols, then
press
– When you enter a wrong letter, then you
can erase it by pressing
– After entering the proxy address, press
press
to select [Proxy]
to select [On] or [Off],
.
.
to select [Done], then
.
Proxy
.
to
Proxy Off
Address
Port
Back Select
Proxy
On
Off
Back Select
Proxy
Enter Proxy Address
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1/+
<>Done
.
English
– To change the characters, press
want to enter.
Port
Press
number, then press
– You can enter numbers only.– When you enter a wrong number, then
– After entering the proxy port, press
47
to select [a/A/1/+], then press
repeatedly until the character you
to select a proxy port
.
you can erase it by pressing
to select [Done], then
press
.
Proxy
Enter Proxy Port
1 2 3 4 5 6 7 8 9 0
<>Done
.
Continued on next page.
Host Name
•
1
From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Host Name], then
press
.
2 The Host Name is displayed on the screen.
If you would like to change it, press
.
Wi-Fi Setup
Wi-Fi Protected Setup
IP Address
Proxy
Host Name
Back Select
Host Name
Verite65Plus-XXXX
Enable Wi-Fi
Enable or disable the Wireless Network for this unit.
1 From the Control panel, navigate to
[Home > Setup > Enable Wi-Fi], then press
.
Setup
Paper Setup
Network Status
Wi-Fi Setup
Enable Wi-Fi
Back Select
3 Enter Host Name. Press to
select letters, numbers and symbols, then
press
.
– Current Host Name is displayed.– When you enter a wrong text character,
then you can erase it by pressing
– To change the characters, press
to select [a/A/1], then press
repeatedly until the character you want to
enter.
4 After entering the Host Name, press
to select [Done], then press .
.
Back Change
Host Name
HostName-123ABC
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1
<>Done
Host Name
HostName-123ABC
a b c d e f g h i j
k l m n o p q r s t
u v w x y z a/A/1
<>
Done
2 Press the to select [Enable] or
[Disable].
3 Press to confirm.
Device Setup
You can set the following unit settings.
Language
•
1
From the Control panel, navigate to [Home
> Setup > Device Setup > Language], then
press
.
Enable Wi-Fi
Enable
Disable
Cancel Select
Device Setup
Language English
Sleep 10min
Privacy Settings
Paper Warning
Back Select
English
2 Press the to select the desired
language from [English], [Español], or
[Français], then press
.
3 Press to confirm. If you would like to
change the chosen language, press
to return to the [Device Setup] screen.
48
Language Select
English
Español
Français
Cancel Select
Language Select
You have chosen
English as
the language
for your printer.
Cancel
Continued on next page.
Sleep
•
1
From the Control panel, navigate to [Home
Menu > Setup > Device Setup > Sleep],
then press
.
Device Setup
Language English
Sleep 10min
Privacy Settings
Paper Warning
Back Select
Paper Warning
•
1
From the Control panel, navigate to [Home
> Setup > Device Setup > Paper Warning],
then press
.
Device Setup
Language English
Sleep 10min
Privacy Settings
Paper Warning
Back Select
2 Select Sleep Time (Time before the unit
goes into Sleep mode) from [1] minute to
[120] minutes. Use
Sleep Time or
to increase the
to decrease the Sleep
Time.
3 Press to confirm.
Privacy Settings
•
1
From the Control panel, navigate to [Home
> Setup > Device Setup > Privacy Settings],
then press
.
2 The message “Allow printer to...” will be
displayed. Use
message down to the end, then press
.
to scroll the
Sleep
Set Sleep Time
UP
10
Down
Cancel Select
Device Setup
Language English
Sleep 10min
Privacy Settings
Paper Warning
Back Select
Privacy Settings
Allow printer to
periodically send
anonymous usage
data.
next
2 Paper Warning has 2 setup items. Press
to select [Paper Detection]
or [Paper Setting Mismatch], then press
.
Paper Detection
1 Press to select [Yes] or [No],
then press
Paper Setting Mismatch
.
1 Press to select [Yes] or [No],
then press
.
Paper Warning
Paper Detection
Paper Setting Mismatch
Back Select
Paper Detection
Detect paper insertion.
Yes
No
Paper Setting Mismatch
Detect paper mismatch
Yes
No
Select
in print job.
Select
3 Press the to select [Don't
allow] or [Allow].
4 Press to confirm.
English
Privacy Settings
Periodically send the
info of your printer.
Allow
Don't allow
Select
Software Version
•
1
From the Control panel, navigate to
[Home > Setup > Device Setup > Software
Version], then press
2 Press .
49
Device Setup
Sleep 10min
Privacy Settings
Paper Warning
.
Software Version
Back Select
Software Version
*.**.***
Back
Continued on next page.
Direct Connect Time
The setting of the Disconnect time when no Direct Mode operation is
detected.
1 From the Control panel, navigate to
[Home > Setup > Direct Connect Time],
then press
.
Setup
Wi-Fi Setup
Enable Wi-Fi
Device Setup
Direct Connect Time
Back Select
Google Cloud Print™
You can set the Google Cloud Print™ settings.
Status
•
Display the connection status or registration
status of the Google Cloud Print™ service.
1 From the Control panel, navigate to [Home
> Setup > Google Cloud Print > Status],
then press
.
Google Cloud Print
Status
Register
Enable/Disable
Back Select
2 Press to select Direct
Connect Time among the selection from
[Disconnect], [5 min], [10 min], [60 min]
and [Unlimited].
3 Press to confirm.
– If you select [Unlimited], when the
mobile is connected by Direct Mode until
selecting [Disconnect] this unit remains in
the Direct Mode.
– If you select [Disconnect], the Direct
Connection will be immediately
terminated.
AirPrint
Enable or disable the AirPrint function.
1 From the Control panel, navigate to
[Home > Setup > AirPrint], then press
.
2 Press to set [Enable] or
[Disable].
3 Press to confirm.
Direct Connect Time
Disconnect
5 min
10 min
60 min
Cancel Select
Setup
Enable Wi-Fi
Device Setup
Direct Connect Time
AirPrint
Back Select
AirPrint
Enable
Disable
Cancel Select
2 The Google Cloud Print™ connection (or
registration) status and unit name will be
shown on the Menu display.
– The
Verite65Plus-XXXX
represents the
unit name of your unit.
Google Cloud Print
Status
Not Configured
Verite65Plus-XXXX
Back
3 Press to return to the previous menu.
The following table shows the Google Cloud Print™ service registration
and connection status of this unit.
StatusUnit state
Not ConfiguredUnit is not registered to the Google Cloud
DisabledThe Google Cloud Print™ service has been
Not ConnectedUnit is not connected to use the Google Cloud
ConnectedUnit is connected from the Google Cloud
DisconnectedUnit has been disconnected to use the Google
Registration in
progress
Print™ service.
The Google Cloud Print™ feature is not
available.
disabled.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)
Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)
Print™ service.
The Google Cloud Print™ feature is available.
(Unit is registered in the Google Cloud Print™
service.)
Cloud Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)
Registration is in process to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not
available.
Registration should complete, please wait.
English
50
Continued on next page.
Register to Google Cloud Print™
•
1
From the Control panel, navigate to [Home
> Setup > Google Cloud Print > Register],
then press
.
Google Cloud Print
Status
Register
Enable/Disable
Back Select
2 Press to set [Enable] or
[Disable].
3 Press to confirm.
GCP Enable/Disable
Enable
Disable
Cancel Select
2 Registration will start and [Registering
printer with Google] message will be
displayed on the screen. The unit will print
a registration URL for the Google Cloud
Print™ registration.
Note(s)❏
• Load plain Letter or A4 -size paper.
3 Use your smartphone/tablet or PC to
access that registration URL within 14
minutes and follow its instructions.
GCP Registration
Registering printer
with Google.
Cancel
Registration
URL
GCP Registration
Registration in progress
Waiting for
access to URL
Cancel
The following table shows actions available in the Google Cloud Print™
action.
Select Action
Action
RegisterRegister to Google Cloud Print™
UnregisterUnregister from Google Cloud Print™
EnableEnable Google Cloud Print™
DisableDisable Google Cloud Print™
Print Reports
Print out the configuration information.
1 From the Control panel, navigate to
[Home > Setup > Print Reports], then press
.
2 Load plain Letter or A4 -size paper.
3 Press to start printing the configuration
report.
Setup
Direct Connect Time
AirPrint
Google Cloud Print
Print Reports
Back Select
Print Reports
Please insert
Letter or A4 paper
and press
.
4 The mail address you registered will appear
on the Menu display, Registration to Google
Cloud Print™ is completed.
5 Press to [Google Cloud Print]
screen.
Note(s)❏
• Make sure you access the registration
URL within 14 minutes at Step 3. The
registration URL will be unavailable after
15 minutes.
Enable/Disable to Google Cloud Print™
•
1
From the Control panel, navigate to [Home
> Setup > Google Cloud Print > Enable/
Disable], then press
.
GCP Registration
Cloud Printer
Mail address
xxxxxxxx@gmail.com
Verite65Plus-XXXX
Google Cloud Print
Status
Register
Enable/Disable
Back Select
Cancel Print
Configuration
Report
English
51
Continued on next page.
Restore Factory Default
All of the unit settings will be reset to the factory default.
1 From the Control panel, navigate to
[Home > Setup > Restore Factory Default],
then press
.
Setup
AirPrint
Google Cloud Print
Print Reports
Restore Factory Defau
Back Select
Software Update
Auto Update
•
Automatically checks for a newer software version and updates when
available.
1 If the latest software version is
automatically found on the server, the
message “New printer software detected.”
will be displayed. Press
.
Software Update
New printer software
detected.
2 Press .
3 Press .
• If you choose [Yes], all settings will be
restored to factory defaults and the unit
will restart.
If you choose [No], the display will return
to [Setup] screen.
Restore Factory Default
Erase ALL content
and settings,
and restore
factory defaults?
Cancel Restore
Restore Factory Default
Are you sure you want
to restore to default?
Select
Yes
No
Note(s)❏
• To cancel the update process, press
.
2 “Do you want to update..” will be displayed.
Press
.
3 Press .
Cancel Next
Software Update
Do you want to update
the printer software?
Installed: *.**.***
Latest: *.**.***
Back Update
Software Update
DO NOT unplug the
power cable or power-
off the printer until
update is completed.
4 Select [Yes], then press .
• If [No] is selected, the Software Update
will be aborted, and the display will
return to [Home].
• This unit will automatically restart upon
completion of the Software Update.
Software Update
Are you sure you want
to update?
Yes
No
Select
English
52
Continued on next page.
Manual Update
•
Manually checks for a newer software version and updates when
available.
1 From the Control panel, navigate to [Home
> Setup > Software Update], then press
.
Setup
Google Cloud Print
Print Reports
Restore Factory Defaut
Software Update
Back Select
2 If the latest software version is found on
the server, the message “Do you want to
update..” will be displayed. Press
.
Software Update
Do you want to update
the printer software?
Installed: *.**.***
Latest: *.**.***
Back Update
Web interface
The Web interface is available to you on all operating systems.
You can access the web interface with an Internet browser on your
PC and conduct many different settings to your unit.
You can access the Web interface if the unit is connected to a
Network via Wireless Connection.
Note(s)❏
• Before you start, make sure your PC and the unit are connected
to the SAME NETWORK.
• When the unit is connected to the Network, the
(Wireless) LED lights up.
Confirming the IP Address
You will need the current IP address of the unit in order to access the
Web interface. To confirm the IP address of the unit, you can check by
selecting [Setup > Network Status > IP Address] on the Control panel.
Refer to “IP Address” on page 45.
»»
Alternatively, you can also verify the IP address by printing out the
Configuration Report.
Refer to “Print Reports” on page 51.
»»
3 Press .
4 Select [Yes], then press .
• If [No] is selected, the Software Update
will be aborted, and the display will
return to the Setup screen.
• This unit will automatically restart upon
completion of the Software Update.
Software Update
DO NOT unplug the
power cable or power-
off the printer until
update is completed.
Software Update
Are you sure you want
to update?
Yes
No
Select
Configuration Report
Device Information
Model Name KODAK VERITE 65 PLUS
Serial Number XXXXXXXXXXXXXXXX
Software Version X.XX.XXX (XXXXXXXX)
Device Statistics Information
Printed Page 44
Scanned Page 65
Supply Information
Black Cartridge
Cartridge Status Installed
Cartridge Type XXL
Ink Level 43%
Color Cartridge
Cartridge Status Installed
Cartridge Type XXL
Ink Level 75 %
Device Configuration
Language English
Default Paper Size Letter
Default Paper Type Plain
Sleep Time-out 10 min
EWS Access path http://xxx.xxx.xxx.xxx
Network Information
:
:
EWS Access path
[2016-07-04 07:42:39(UTC)]
http://xxx.xxx.xxx.xxx
Unit’s IP address
Calling the Web interface
For the first time use, you will need to set the Password to get
the entire features on the Web interface. After you have set the
Password, you do not need to set the Password anymore.
1 Start an Internet browser on a PC, which is connected to the
Network.
English
Note(s)❏
Suitable Internet browser
• We recommend the following Internet browser.
– Windows®: Internet Explorer® (version 8.0 or above)– Mac: Safari (version 1.3 or above)
2 Enter the IP address of the unit into the address bar of the browser.
http://xxx.xxx.xxx.xxx
53
Unit’s IP address
Continued on next page.
3 The following screen will be displayed.
Click on the item to check the information or change
its settings.
The printer’s status is displayed here.
[Ready / Busy / Status message]
More details on Status messages and how to correct
problems can be found under “Status messages, LCD
messages and LED behaviors”.
Refer to “Status messages, LCD messages and LED
»»
behaviors” on page 65.
Changes the display language.
After selecting the language, click on [Accept].
Input “admin” into the “Password” field, then click on [Login]
then, create the Password as you like.
Refer to “Login Password” on page 56.
»»
Network
If necessary, you can confirm or set the state of the Network. If you
are not familiar with Network management, use the default settings.
Note(s)❏
Device Status
You can check the status of the unit, such as remaining ink level.
Device Configuration
General Settings
•
You can change the following items.
• Default Paper Size/Type
If you change this setting, the default Paper Size/Type in Copy
Menu setting are also changed.
• Sleep mode time
You can change the time required before unit enters Sleep mode
from [1 min/10 min/20 min/30 min/40 min/50 min/60 min/70
min/80 min/90 min/100 min/110 min/120 min].
Print Reports
•
You can print out the configuration report.
Factory Reset
•
You can restore the default settings to the unit.
Note(s)❏
• The unit will automatically restart after reset to factory settings.
(The Web Interface will be disconnected.)
• Be careful if you want to assign the IP address manually. If the
IP address you entered is not correct, you will not be able to
connect to the unit. When you cannot connect to the unit after a
configuration change, please reset the unit.
Refer to “Restore Factory Default” on page 52.
»»
• When the connection of the unit is changed, the Web interface
will be disconnected. If necessary, reconnect the Web interface.
Enable Wi-Fi
•
You can turn On / Off the Wireless function.
Note(s)❏
• Even if the Wireless function is set to Off, when you connect by
Easy Simple Print, the Wireless function will be valid.
• When you have connected the unit to the Access Point/Router, if
you set to disable Wi-Fi, you will not be able to operate from the
Web Interface. If you connect to Wi-Fi again, select the “Enable”
from the “Enable Wi-Fi” of unit menu.
Refer to “Enable Wi-Fi” on page 48.
»»
English
54
Continued on next page.
TCP/IP (IPv4) Settings
•
You can change the IP source / IP address or the like.
Note(s)❏
• The initial value of the IP Source of Wireless is DHCP.
IPv6 Settings
•
This unit supports IPv6 in order to support AirPrint.
You can check the information on IPv6.
Wireless LAN Settings
•
Mobile
AirPrint
•
You can set the AirPrint Settings.
Refer to “AirPrint” on page 24 for more information.
»»
Note(s)❏
• When you select [Certificate Installation] or [Certificate Request
Generate], you can set the encrypted communication.
AirPrint Configuration
You can turn On/Off the AirPrint function. If set to On, you can print
using the AirPrint.
• You can change connection settings by setting the SSID / Security /
Password for Wireless Connection.
Proxy Settings
•
• You can connect to Internet through a proxy server.
• The printer name (Friendly Name) and its information are
displayed when you are using AirPrint.
English
55
Continued on next page.
Google Cloud Print™
•
You can set the Google Cloud Print™ settings.
• Registration and connection status of Google Cloud Print™ will
be shown. More information can be found under “Google Cloud
Print™”.
Refer to “Google Cloud Print™” on page 50 for more information.
»»
• The printer name and its information are displayed when you are
using Google Cloud Print™.
Action
You can set the following for the Google Cloud Print™ setting.
After you select the Action, click on [Accept].
Software Update
• If the Software Update for this unit is available, the Update
button is displayed. Press it and start to update the Software.
• When the Software is the latest version, the Update button is not
displayed.
Login Password
Select Action
Register to Google Cloud
Print
Disable Cloud PrintDisable Google Cloud Print™
Suspend Cloud PrintSuspend Google Cloud Print™
Enable Cloud PrintEnable Google Cloud Print™
Resume Cloud PrintResume Google Cloud Print™
Unregister from GoogleUnregister from the Google Cloud Print™
Register CancelCancel the Google Cloud Print™
Set XMPP Ping IntervalSet the interval time to communicate
*Usually, set the XMPP ping interval to 5 minutes (default).
To change this setting, select [Set XMPP Ping Interval] in [Select
Action] and choose the communication interval from 1 minute to 10
minutes.
Register to Google Cloud Print™
registration
with the Google Cloud Print™ service.
Action
Note(s)❏
• When you select [Register to Google Cloud Print], then ensure
plain Letter or A4-size paper is loaded.
Order Supplies
If you would like to purchase consumable material, visit the following
website at www.kodakverite.com
• Once you have logged in to the Web interface with “admin”, it is
recommended that you change the Password.
Note(s)❏
• Record the Password in case you forget it.
• If you have forgotten the Password, you can perform [Restore
Factory Default] to reset all settings, including the Password, to
their factory default. After resetting the unit, you can login with
the default Password “admin”.
• Passwords may only contain alphanumeric characters, and are
from 1 to 32 characters in length.
• default Password “admin” provides you with full access to all
setup functions, but can allow access by an unauthorized third
party. It is recommended that you change the Password.
English
56
Service
2
XL
1
XL
2
XL
2
XL
Note(s)❏
• If any problems occur, please see the notifications on the Status
Messenger (Windows®).
Refer to “Status Messenger for Windows®” on page 25.
»»
Checking ink levels
2 Press the Cartridge tab to open the Cartridge slot.
s
s
s
s
e
e
r
r
P
P
!
!
Using the Control panel
• From the Control panel, press
press
Using PC
Refer to “Status Messenger for Windows®” on page 25.
»»
.
until [Ink Levels], then
Changing the ink cartridge
CAUTIONC
Use Original Consumable Materials!
• Use only original consumable materials. These are available
from a specialized retailer or through our order service. Other
consumable materials can cause damage to the unit.
Observe Packaging Instructions
• Follow the instructions on the packaging of the consumable
materials.
1 Open the unit by lifting the Ink door.
DO NOT Open During a Print Job!
• Never open the Ink door while printing.
3 Remove the cartridges.
Black
e
e
e
d
d
d
i
i
i
l
l
l
S
S
S
4 Remove the Black and Color Ink cartridges from the packaging.
5
BLACK
■■
L
5 Remove the plastic tape on the Black and Color Ink cartridges using
the red pull tab.
Color
S
S
S
ColorBlack
l
l
l
COLOR
e
e
e
d
d
d
i
i
i
5
■■
L
DO NOT TOUCH
1
2
• DO NOT TOUCH the gold contact area on the back or the
metal nozzles on the bottom of the Cartridge.
English
57
Continued on next page.
6
2
XL
2
XL
Set the Color Ink cartridge all the way into the slot on the right side.
Color
Black
(Right)
(Left)
S
S
S
l
l
l
S
S
S
e
e
e
d
d
d
i
i
i
e
e
e
d
d
d
i
i
i
l
l
l
1
2
7 Set the Black Ink cartridge all the way into the slot on the left side
(above).
8 Push and click the Cartridge tab to close the slot until the cover
snaps securely into position.
Ordering supplies
If you would like to purchase consumable material, visit the following
website at www.kodakverite.com/support
Ordering ink cartridges
•
Product NameInk Page Yield
Kodak Verité 5 Standard Black Ink Cartridge~200 pages
Kodak Verité 5 Standard Color Ink Cartridge~180 pages
Kodak Verité 5 XL Black Ink Cartridge
Kodak Verité 5 XL Color Ink Cartridge
Kodak Verité 5 XXL Black Ink Cartridge
Kodak Verité 5 XXL Color Ink Cartridge
Kodak Verité 5 3XL Black Ink Cartridge
Kodak Verité 5 3XL Color Ink Cartridge
Kodak Verité 5 XL Combo Ink Cartridge
Kodak Verité 5 3XL Combo Ink Cartridge
Ink page yield values for color graphics and text document obtained
by continuous printing in accordance with ISO/IEC 24711.
Actual results may vary.
Note(s)❏
~
400 pages
~
360 pages
~
600 pages
~
500 pages
~
1200 pages
~
1080 pages
Black: ~400 pages/
Color: ~360 pages
Black: ~1200 pages/
Color: ~1080 pages
C
C
l
l
i
i
c
c
k
k
!
!
9 Close the Ink door.
CAUTIONC
Ink Cartridge Not Inserted Correctly!
• If the Ink door does not close properly, the Ink cartridges are
not inserted correctly. Remove the Ink cartridges and then
correctly re-insert them.
• For page yield information, visit www.kodakverite.com/support
• The cartridges used for printing documents can also be used for
printing photos.
• For best results, use only genuine KODAK VERITÉ Ink Cartridges.
Using genuine KODAK VERITÉ Ink Cartridges
KODAK VERITÉ Ink Cartridges are designed to perform for superior
print quality, and our inks are formulated to work with the unit and
help extend the life of your product.
We recommend that you use only genuine KODAK VERITÉ Ink
Cartridges sold by Funai Corporation, Inc.
Funai’s warranty does not cover damage caused by non-KODAK
VERITÉ Ink or Ink Cartridges.
Green
DO NOT PUSH the green/blue
parts at the same time.
Blue
English
58
Continued on next page.
Fixing a paper jam
Cleaning the ink cartridge nozzles and contacts
Clearing paper jam in the unit
•
Note(s)❏
• The Parts inside the unit are Sensitive. Avoid unnecessarily
touching Parts while Clearing Jams.
1 Check the paper support, the other side of the removed rear cover
(Duplex Unit) or the fully-opened front cover for jammed paper.
2 Firmly grasp both sides of the paper and then gently pull it out.
Note(s)❏
• Be careful not to tear the paper while removing it.
3 Press to cancel the rest of the print job.
Restoring the factory settings
You can restore the default settings on the unit using the web
interface or Control panel.
Refer to “Restore Factory Default” on page 52.
»»
Power cycling
Refer to “Troubleshooting” on page 61.
»»
If a problem occurs that cannot be corrected with the instructions in
“Troubleshooting”, follow the Steps given here.
1 Remove the ink cartridge(s).
2 Dampen a clean, lint-free soft cloth with water, and then place the
cloth on a flat surface.
3 Gently hold the nozzles against the cloth for about 3 seconds, and
then wipe in the direction shown.
e.g.) Kodak Verité 5 XL Color Ink Cartridge
4 Using another clean section of the cloth, gently hold the cloth
against the contacts for about 3 seconds, and then wipe in the
direction shown.
e.g.) Kodak Verité 5 XL Color Ink Cartridge
5 With another clean section of the cloth, repeat Step 3 and Step 4,
and then let the nozzles and contacts dry completely.
6 Reinsert the ink cartridge(s), and then print the document again.
7 If the print quality does not improve, clean the print nozzles, and
then try printing the document again.
8 Repeat Step 7 up to two more times.
9 If print quality is still not satisfactory, replace the ink cartridge(s).
1 Pull out the AC plug.
2 Wait at least 30 seconds, then connect the AC plug back into the
AC outlet.
3 Follow the instructions on the display and in the error report. If the
problem repeats, visit the following website at www.kodakverite.
com/support
Cleaning the printhead nozzles
Using the Control panel
•
1
From the Control panel, press until [Setup], then press
.
2 Press to select [Maintenance], then press .
3 Press to select [Clean Printhead], then press .
4 Load plain Letter or A4 -size paper.
5 Press to start cleaning the printhead.
6 A page prints, forcing ink through the ink cartridge nozzles to clean
them (this will use up some of your Ink from the Cartridges).
7 Print the document again to verify that the print quality has
improved.
English
59
Continued on next page.
Preserving the ink cartridges
Cleaning the exterior of the unit
• Keep new ink cartridges in their packaging until you are ready to
install them.
• DO NOT remove an ink cartridge from the unit except to replace,
clean, or store it in an airtight container. The cartridges do not
print correctly if left exposed for an extended period of time.
CAUTIONC
Refilling ink cartridges
• The warranty does not cover repair of failures or damage
caused by a refilled ink cartridge.
• KODAK does not recommend use of a refilled ink cartridge.
• Refilling an ink cartridge can affect print quality and may
cause damage to the unit.
• For the best results, use KODAK Supplies.
Warning - Drying out of the Printheads:
• DO NOT move the Ink Cartridge Holder by hand.
If you move the Cartridge Holder to the left the printhead
Cover Caps will not protect the Printheads from Drying out.
Cleaning the scanner glass
1 Dampen a clean, lint-free soft cloth with water.
2 Gently wipe the scanner glass clean.
3 Use a dry lint-free soft cloth to wipe the moisture left over.
Note(s)❏
• Make sure all ink or corrective fluid on a document is dry before
placing the document on the scanner glass.
1 Make sure that the unit is turned Off and unplugged from the AC
outlet.
SHOCK HAZARD
• To avoid the risk of electric shock, disconnect the AC Power
cord from the AC outlet and disconnect all cables to the unit
before proceeding.
2 Remove paper from the paper support and paper exit tray.
3 Dampen a clean, lint-free soft cloth with water.
CAUTIONC
Warning - Potential Damage:
• DO NOT use household cleaners or detergents, as they may
damage the finish on the unit.
4 Wipe only the outside of the unit, making sure to remove any ink
residue that has accumulated on the paper exit tray.
CAUTIONC
Warning - Potential Damage:
• Using a damp cloth to clean the interior may cause damage to
your unit.
5 Make sure the paper support and paper exit tray are dry before
beginning a new print job.
Periodic maintenance is required
The unit will automatically clean the nozzles itself regularly to keep
an appropriate print quality. This maintenance begins automatically
even when the unit is in Sleep mode.
Important Notice Regarding Printheads
This unit automatically protects the printhead (caps) on each ink
cartridge in order to prevent the printheads from drying. This function
is only performed in Power-Off mode when pressing
Standby) button. DO NOT Unplug the AC Power cord from the AC
outlet to shut down the unit or move the ink cartridge access holder
after the unit was shut down. Failure to do so may result in Clogging
of the Printhead Nozzles.
(Power/
English
60
Troubleshooting
You can correct most problems by yourself. If you need additional help, the KODAK Solutions Center offers the most up-to-date driver, manuals,
the latest FAQs and troubleshooting tips. Visit our website at www.kodakverite.com/support
Setup troubleshooting
Incorrect language appears on the displayChange the language selection during initial setup
– During initial setup, and every time you reset the unit to factory default settings, you will be
asked to select a language.
– Factory default
Refer to “Restore Factory Default” on page 52.
»»
Select a different language after initial setup
In case the wrong language was set during initial setup, you can still change the language
settings of the unit.
Refer to “Language” on page 48.
»»
Power/Standby button is not lit
Software did not install
• Press
Make sure the unit is on by pressing
• Disconnect and reconnect the AC plug
1 Disconnect the AC plug from the AC outlet for 30 sec.
2 Connect the AC plug to an AC outlet that other electrical
3 If the (Power) LED is not lit, press (Power/Standby).
If you encountered problems while installing, or if the unit does not appear in the list in the printers folder
or as the unit option when sending a print job, you can try uninstalling and reinstalling the Software.
Make sure your operating system is supported
The following operating systems are supported:
Windows® 10
Windows® 8.1
(Power/Standby)
(Power/Standby).
devices have been using or check this outlet with another device.
Microsoft® Windows®
OS VersionProcessorBrowserUSB port
Windows® Server 2012
Windows® Server 2008
Windows® 8Windows® Vista
Windows® 7
32-bit (x86) or
64-bit (x64)
Microsoft
Edge (Only
Windows 10
Internet
Explorer®
),
USB 2.0
High Speed or Full Speed
Apple Mac OS
OS VersionProcessorBrowserUSB port
OS X v10.11
(El Capitan)
OS X v10.10
(Yosemite)
OS VersionProcessorBrowserUSB port
Debian 8.0
Check that your PC meets the minimum system requirements listed on the printer box.
• Check the USB connection
OS X v10.9
(Mavericks)
OS X v10.8
(Mountain Lion)
Linux
Ubuntu 14.04 LTS
Intel® Core™
Processor
700MHz (about
Intel® Celeron™
or better)
Safari
Firefox
USB 2.0
High Speed or Full Speed
USB 2.0
High Speed or Full Speed
1 Check the USB cable for any obvious damage. If the cable is damaged, use a new one.
2 Firmly plug the square end of the USB cable into the back of the unit.
3 Firmly plug the rectangular end of the USB cable into the USB port of your PC.
The USB port is marked with the USB symbol.
• Reconnect the power supply
1 Press (Power/Standby) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet.
3 Connect the AC plug to the AC outlet.
4 Press (Power/Standby) to turn the unit On.
English
61
Continued on next page.
Software did not install (continued)
Page does not print
• Temporarily disable security programs in Windows®
1 Close all open programs.
2 Disable any security programs.
3 Double-click the downloaded installer file to extract it.
4 Follow the instructions on the PC screen to install the Software.
5 When the installation is completed, enable the security Software again.
• Check messages
If an error message appears, then resolve the error before trying to print again.
• Check power
If the
connected to the unit and the AC plug is connected to a known working AC outlet that other
electrical devices have been using or check this outlet with another device.
• Remove and then reload paper
• Check ink
Check the ink levels, and then install new ink cartridges if necessary.
• Check cartridges
(Power) LED is not On, then make sure that the AC Power cord is properly
1 Remove the ink cartridges.
2 Make sure the sticker and tape have been removed.
3 Reinsert the cartridges.
• Check printer default and pause settings
Using Windows® 10 / 8.1 / 8 / 7 / Vista
1 a. Right-click the Windows® start menu, click [Control Panel], [Hardware and Sound]
and [Devices and Printers] (Windows® 10 / 8.1).
b. Right-click at the bottom left corner on your desktop, click [Control Panel],
[Hardware and Sound] and [Devices and Printers] (Windows® 8).
c. From the Windows® start menu, click [Devices and Printers] (Windows® 7).
d. From the Windows® start menu, click [Control Panel], [Hardware and Sound] and
[Printers] (Windows® Vista).
2 Either double-click the icon for your unit or right-click the icon for your unit and select,
See what’s printing to open the print queue.
3 On the menu, make sure there are no check marks next to Pause Printing or Use Printer Offline.
4 If you made any changes, try to print again.
If a check mark does not appear next to Set As Default Printer, then you must select the unit
for each file that you want to print.
• Disconnect and reconnect power supply
Print unexpectedly or it prints garbage data.
English
1 Press (Power/Standby) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet for 30 sec.
3 Connect the AC plug to the AC outlet.
4 Press (Power/Standby) to turn the unit On.
• Remove and reinstall the Printer Software
If you encountered problems while installing, or if the unit does not appear in the printers folder
or as a printer option when sending a print job, then try uninstalling and reinstalling the Printer
Software.
• Make sure that the USB cable is not too long.
• Make sure that the USB cable is not damaged or broken.
• If you are using a USB interface-switching device, remove it. Connect your PC directly to your
unit, and then try again.
• Make sure that you have chosen the correct printer driver to [Set as Default Printer].
• Make sure that this unit is not connected to the same port that is also connected to a storage
device or scanner device. Remove all other devices and connect only this unit (printer) to this port.
62
Continued on next page.
Solving the power problems
Removing and reinstalling the Printer Software
Enabling the USB port in Windows®
• The unit and your PC cannot exchange data.
• Make sure the power supply is attached correctly to the unit.
1 Press (Power/Standby) to turn the unit Off (Standby).
2 Disconnect the AC plug from the AC outlet.
3 Wait 30 seconds and then reconnect the AC plug to the AC outlet.
4 Press (Power/Standby) to turn the unit On.
• Make sure the unit is not in Sleep mode.
If the power light is blinking On and Off slowly, then the unit is in Sleep mode.
1 Disconnect the AC plug from the AC outlet.
2 Wait 30 seconds and then reconnect the AC plug to the AC outlet.
3 Press (Power/Standby) to turn the unit On.
If the unit is not working properly, or if a communication error message appears when you try to
use the unit, then you may need to remove and reinstall the Printer Software.
Using Windows® 10 / 8.1 / 8 / 7 / Vista
1 Open All Programs or All apps.
a. Click [Start] button, Click [All Apps], and then select the printer Software folder
“KODAK VERITE” from the list (Windows® 10 / 8.1).
b. Display [Start] screen, right-click for [All Apps] icon to fade into the bottom right,
click [All Apps], select the printer Software folder “KODAK VERITE” from the list
(Windows® 8).
c. Click [Start] button, Click [All Programs], and then select the printer Software folder
“KODAK VERITE” from the list (Windows® 7 / Vista).
2 Select Uninstall.
3 Follow the instructions on your PC screen to remove the printer Software.
4 Restart the PC before reinstalling the printer Software.
5 Click Cancel on all New Hardware Found screens.
6 From your PC go to www.kodakverite.com/support and confirm that the
“DOWNLOADS” tab is selected.
7 Select model number on this unit from [Select Model Number].
8 Click “Drivers and Software” tab.
9 Click OS you use.
10 Click [PC Drivers & Software].
11 Click the version number on the far-right.
Refer to “Before you download the printer driver to your PC” on page 17.
»»
• To confirm that the USB port is enabled on your PC:
Using Windows® 10 / 8.1 / 8 / 7 / Vista
1 a. Right-click [Start] (Windows® 10 / 8.1).
b. Right-click at the bottom left corner on your desktop (Windows® 8).
c. Click [Start] button (Windows® 7 / Vista).
2 Click Control panel > Hardware and Sound.
3 Under Devices and Printers, click Device Manager.
4 Double-click Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled. For more
information, see your PC documentation.
English
63
Continued on next page.
Status Messenger Error Message appears
•
Refer to “Check print status from your PC” on page 25 and “Status
»»
messages, LCD messages and LED behaviors” on page 65.
Paper handling
•
Refer to “Print media” on page 26 and “Status messages, LCD
»»
messages and LED behaviors” on page 65 (status message: Paper
Jam).
Pages are printed, but there are problems with:
•
– Print quality
Refer to “Improving the print quality” on page 71.
»»
Network problems
•
If you need additional help, the Funai Solutions Center offers the mostup-to-date driver, manuals, the latest FAQs and troubleshooting tips.
Visit our website at www.kodakverite.com/support
Alignment problems
•
If the following message is displayed on the LCD during alignment,
make sure whether the alignment pattern is a printing failure or not.
Cartridge Setup
Test scan failed.
Place test print on
lower right corner of
scanner, and close lid.
BackScan
If the message is displayed repeatedly:
- Load a plain and unmarked Letter or A4-size paper. The unit
will read any markings on used paper, which could cause the
alignment error message to reappear.
- Open the Ink Door, then remove and reinstall the Ink Cartridges.
Refer to “Cartridge Setup” on page 43.
»»
English
64
Continued on next page.
Status messages, LCD messages and LED behaviors
The Status information will report problems with the unit. Take the proper action by referring to the following table.
Refer to “Check print status from your PC” on page 25.
Blinking 9 Blinking slowly (in Power-on mode)
Blinking 4 Blinking very slowly
Status messagesLCD messagesLED behaviorsUnit status or possible causesRefer to
Communication failed on the unit.
– Check the AC plug is connected to the AC outlet
properly, the unit is turned On or the connection
environment (USB, Wireless) to the unit. Then
follow the procedures by showing the help text
on your connected unit.
•If this error occurs occasionally, refer to the
Communication failure
Ready
(No Error message)
latest troubleshooting by visiting our website
at www.kodakverite.com/support
•If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
Insert Paper.
– Check the paper support.
•Set specified paper in the paper support, and
then press
.
“Insert paper into the paper
support”
on page 27.
Insert Paper
Insert Paper
Please insert paper
and press
CancelStart
.
blinks as pattern 1
Paper Jam
Paper Jam.
Open rear cover.
English
Paper Jam
Clear jam and
press
Paper Jam
Open rear cover.
Clear jam and
press
A paper jam has occurred inside of the unit.
– Firmly grasp both sides of the jammed paper,
.
blinks as pattern 1
then slowly pull it out.
Press
, to restart the rest of the print job.
“Clearing paper jam in
the unit”
on page 59.
A paper jam has occurred during duplex
printing, or the rear cover (Duplex Unit) is
detached.
blinks as pattern 1
.
– Open the rear cover (Duplex Unit), then firmly
grasp both sides of the jammed paper and slowly
pull it out.
“Clearing paper jam in
the unit”
on page 59.
– This error occurs when there is an automatic
duplex printing function.
65
Continued on next page.
Status messagesLCD messagesLED behaviorsUnit status or possible causesRefer to
An unsupported size of paper for two-sided
printing is inserted.
– Insert supported size of paper (Letter or A4).
“Specifications for print
media” on page 26 .
Paper Size Error
Paper Size Error
Print job has been
canceled.
Paper size mismatch.
blinks as pattern 1
Paper Size is short.
Paper Setting Mismatch
Check cartridge lock
Paper Jam:
Unplug and replug the
power cable.
Cartridge/Paper Jam:
Unplug and replug the
power cable.
Printer's ink door is
open.
Short paper
Print job has been
canceled.
Paper size mismatch.
Paper Setting Mismatch
Press to print
with print setting.
Paper Size 4x6 in.
Paper Type Glossy
Cancel Print
Cartridge Error
Please check
ink cartridge lock.
to retry.
Press
Paper Jam
Paper Jam or
feed Roller Stall.
Clear Jam
and Unplug and replug
the power cable.
Cartridge/Paper Jam
Please clear
the paper jam.
Unplug and replug
the power cable.
Ink Door Open
Please close
ink door.
blinks as pattern 1
blinks as pattern 1
blinks as pattern 1
and
blink as pattern 1
and
blink as pattern 1
blinks as pattern 1
Attempted to print on paper which is shorter in
length than set in the Paper Settings.
The Paper Size/Paper Type setting for this print
job does not match that of the Print Settings.
– Check the Print Settings.
•To continue printing, press
.
•It is configurable whether or not to display
this message.
An ink cartridge is not installed correctly.
– If the packaging paper is stuck in the Ink door,
remove it.
– Reinstall the cartridge, then close the lid completely.
•Confirm the ink cartridge is correctly installed,
then press .
A paper jam has occurred inside of the unit.
– Firmly grasp both sides of the paper, and then
gently pull it out. Pull out the AC plug. Wait
at least 30 seconds, then connect the AC plug
back into the AC socket.
•If this error occurs occasionally, visit our
website at www.kodakverite.com/support for
the latest troubleshooting.
•If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
An ink cartridge is not installed correctly.
– Pull out the AC plug.
Check that the Ink Cartridges have no obstacles
and clear pathways.
Connect the AC plug to the AC outlet.
A paper jam has occurred inside of the unit.
– Firmly grasp both sides of the paper, and then
gently pull it out. Pull out the AC plug. Wait
at least 30 seconds, then connect the AC plug
back into the AC socket.
•If this error occurs occasionally, visit our
website at www.kodakverite.com/support for
the latest troubleshooting.
•If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
Ink Door Open
– Close Ink Door.
“Paper Setup” on page
44 .
“Paper Setting Mismatch”
on page 49 .
“Unpack” on page 11.
“Install ink cartridges” on
page 12.
“Changing the ink cartridge”
on page 57.
“Clearing paper jam in
the unit”
on page 59.
“Power cycling”
on page 59.
“Clearing paper jam in
the unit”
on page 59.
“Power cycling”
on page 59.
English
66
Continued on next page.
Status messagesLCD messagesLED behaviorsUnit status or possible causesRefer to
BlackColor
Black
Color
Black
Color
Soiled or unsupported ink cartridge has been
inserted.
– Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.
Remove and Re-insert
black ink cartridge.
Cartridge Error
Remove and re-insert
black ink
blinks as pattern 1
– Replace the current Ink cartridge(s) with an
authorized Ink cartridge(s).
Remove and Re-insert
color ink cartridge.
Cartridge Error
Remove and re-insert
color ink
blinks as pattern 1
•If this error occurs occasionally, try to replace
the current Ink cartridge(s) with a new Ink
cartridge(s).
“Cleaning the ink cartridge
nozzles and contacts”
on page 59.
“Changing the ink cartridge”
on page 57.
Remove and Re-insert
both black and color ink
cartridges.
Black ink is empty.
Color ink is empty.
Both inks are empty.
No Ink detected
Black Ink Error
Color Ink Error
Cartridge Error
Remove and re-insert
both black and
color ink
Black Ink Empty
Empty
Empty
Empty
Color Ink Empty
Empty
Both Inks Empty
EmptyEmpty
No Ink detected
Please insert
ink cartridges.
Black Ink Error
Please replace
the black ink.
Color Ink Error
Please replace
the color ink.
blinks as pattern 1
blinks as pattern 1
blinks as pattern 1
blinks as pattern 1
blinks as pattern 1
blinks as pattern 1
blinks as pattern 1
The ink is empty in the ink cartridge.
– Replace with a new Ink cartridge(s).
•Order new Ink cartridge(s) from our website at
www.kodakverite.com
No ink detected.
– Remove and reinstall the Ink cartridges.
– Make sure the Ink cartridges are inserted
correctly.
– Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.
Black ink cartridge error.
– Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.
– Replace the current Ink cartridge with an
authorized Ink cartridge.
•If this error occurs occasionally, try to replace
the current Ink cartridge with a new Ink
cartridge.
Color ink cartridge error.
– Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.
– Replace the current Ink cartridge with an
authorized Ink cartridge.
•If this error occurs occasionally, try to replace
the current Ink cartridge with a new Ink
cartridge.
“Changing the ink cartridge”
on page 57.
“Changing the ink cartridge”
on page 57.
“Cleaning the ink cartridge
nozzles and contacts”
on page 59.
“Cleaning the ink cartridge
nozzles and contacts”
on page 59.
“Changing the ink cartridge”
on page 57.
“Cleaning the ink cartridge
nozzles and contacts”
on page 59.
“Changing the ink cartridge”
on page 57.
English
67
Continued on next page.
Status messagesLCD messagesLED behaviorsUnit status or possible causesRefer to
Ink cartridges error.
– Clean the surface of the nozzles and contacts on
“Cleaning the ink cartridge
nozzles and contacts”
on page 59.
“Changing the ink cartridge”
on page 57.
Both Inks Error
Both Inks Error
Please replace
both ink cartridges.
blinks as pattern 1
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.
– Replace the current Ink cartridges with
authorized Ink cartridges.
•If this error occurs occasionally, try to replace
the current Ink cartridges with new Ink
cartridges.
Ink cartridge(s) error.
– Clean the surface of the nozzles and contacts on
“Cleaning the ink cartridge
nozzles and contacts”
on page 59.
“Changing the ink cartridge”
on page 57.
Defective Cartridge
Ink Error
Defective cartridge.
Check the ink.
blinks as pattern 1
the Ink cartridge(s) with a dampened soft cloth
then let them dry before reinserting cartridge.
– Replace the current Ink cartridge(s) with
authorized Ink cartridge(s).
•If this error occurs occasionally, try to replace
the current Ink cartridge(s) with new Ink
cartridge(s).
Black ink is empty in the ink cartridge.
– You get good printed results with Color mode
when you make prints in this condition, and the
warning indication continues until you press
Black ink is empty.
Black Ink Empty
Printing in
color-only mode.
.
•If you want to use both Ink cartridges, please
replace with a new Black Ink cartridge.
Color ink is empty in the ink cartridge.
– You get good printed results with Mono mode
when you make prints in this condition and the
warning indication continues until you press
Color ink is empty.
Color Ink Empty
Printing in
mono-only mode.
.
•If you want to use both Ink cartridges, please
replace with a new Color Ink cartridge.
Black ink is not inserted.
– You get good printed results with Color mode
when you make prints in this condition, and the
warning indication continues until you press
.
Black ink cartridge is
not detected.
Black Ink Missing
Printing in
color-only mode.
•If you want to use both Ink cartridges, please
replace with a new Black Ink cartridge.
Color ink is not inserted.
– You get good printed results with Mono mode
when you make prints in this condition, and the
warning indication continues until you press
.
Color ink cartridge is
not detected.
Color Ink Missing
Printing in
mono-only mode.
•If you want to use both Ink cartridges, please
replace with a new Color Ink cartridge.
Attempting to print with Glossy Photo type
Paper without a Color ink cartridge installed.
– You get good printed results with Mono mode
when you make prints in this condition, and the
warning indication continues until you press
.
•If you want to use both Ink cartridges, please
cancel the print job, then press
and
Print Warning: Color
ink cartridge is not
detected.
Print Warning !
Color Ink Missing
You can't print
photo correctly.
Cancel Continue
blinks as pattern 1
install a new Color Ink cartridge.
Attempting to print with Glossy Photo type
Paper with an empty Color ink cartridge.
– You get good printed results with Mono mode
when you make prints in this condition, and the
warning indication continues until you press
.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
Print Warning: Color ink
is empty.
Print Warning !
Color Ink Empty
You can't print
photo correctly.
Cancel Continue
blinks as pattern 1
replace with a new Color Ink cartridge.
English
68
Continued on next page.
Status messagesLCD messagesLED behaviorsUnit status or possible causesRefer to
Attempting to make a photocopy with Glossy
Photo type Paper without a Color ink cartridge
installed.
– You get good printed results with Mono mode
when you make prints in this condition, and the
warning indication continues until you press
.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
Copy Warning: Color
ink cartridge is not
detected.
Copy Warning !
Color Ink Missing
You can't copy
photo correctly.
Cancel Continue
blinks as pattern 1
install a new Color Ink cartridge.
Attempting to make a photocopy with Glossy
Photo type Paper with an empty Color ink
cartridge.
– You get good printed results with Mono mode
when you make prints in this condition, and the
warning indication continues until you press
.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
Copy Warning: Color
ink is empty.
Copy Warning !
Color Ink Missing
You can't copy
photo correctly.
Cancel Continue
blinks as pattern 1
replace with a new Color Ink cartridge.
Black ink is empty in the ink cartridge.
– You get good printed results with Color mode in
this condition.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
replace with a new Black Ink cartridge.
Color ink is empty in the ink cartridge.
– You get good printed results with Mono mode
in this condition.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
replace with a new Color Ink cartridge.
Black ink is not inserted.
– You get good printed results with Color mode in
this condition.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
replace with a new Black Ink cartridge.
Color ink is not inserted.
– You get good printed results with Mono mode
in this condition.
•If you want to use both Ink cartridges, please
cancel the print job then press
and
replace with a new Color Ink cartridge.
Black ink level is low.
– You should prepare for a new Ink cartridge.
•Order new Ink cartridge(s) from our website at
www.kodakverite.com
“Changing the ink cartridge”
on page 57.
“Changing the ink cartridge”
on page 57.
Black ink is empty.
Color ink is empty.
Black ink cartridge is
not detected.
Color ink cartridge is
not detected.
Black ink level is Low.
Print
Printing...
■■■■■■□□
Black Ink Empty
Cancel
Print
Printing...
■■■■■■□□
Color Ink Empty
Cancel
Print
Printing...
■■■■■■□□
Black Ink Missing
Cancel
Print
Printing...
■■■■■■□□
Color Ink Missing
Cancel
Print
Printing...
■■■■■■□□
Black Ink Low
Cancel
Color Ink level is Low.
Both ink levels are low.
English
Print
Printing...
■■■■■■□□
Color Ink Low
Cancel
Print
Printing...
■■■■■■□□
Inks Low
Cancel
Color ink level is low.
– You should prepare for a new Ink cartridge.
•Order new Ink cartridge(s) from our website at
www.kodakverite.com
Both inks are low in the ink cartridges.
– You should prepare for new Ink cartridges.
•Order new Ink cartridges from our website at
www.kodakverite.com
69
Continued on next page.
Status messagesLCD messagesLED behaviorsUnit status or possible causesRefer to
Printer Memory Full
Memory Full
Print failure.
Adjust the print
settings to reduce the
quality of the print job.
Skip
blinks as pattern 1
Memory of the unit is full.
– You cannot print with this print setting.
– Please change the print setting, and try again.
(Resolution, size or number of copies)
“Confirming Printing
Preferences for Windows®
-Page Layouts” on page
30
or “Confirming Print
Settings for Mac -Layout”
on page 32.
Printer Memory Full
(Recoverable)
Memory Full
Print failure.
You can print
only one copy.
Skip Continue
blinks as pattern 1
Memory of the unit is full.
– You cannot print the multiple copies with this
print setting.
– Please change the print setting, and try again.
(Resolution, Size or Number of copies)
“Confirming Printing
Preferences for Windows®
-Print Quality” on page 30
or “Confirming Print
Settings for Mac -Quality &
Media”
on page 33.
Pull out the AC plug.
– Wait at least 30 seconds, then connect the AC
Scanner Error:
Unplug and replug the
power cable.
Scanner Error
Please check
Scanner Unit
and Unplug and replug
the power cable.
and
blink as pattern 1
plug back into the socket.
•If this error occurs occasionally, visit our
website at www.kodakverite.com/support for
the latest troubleshooting.
•If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
“Power cycling”
on page 59.
Service Center.
Pull out the AC plug.
– Wait at least 30 seconds, then connect the AC
Memory Error:
Unplug and replug the
power cable.
Memory Error
Unplug and replug
the power cable.
and
blink as pattern 1
plug back into the socket.
•If this error occurs occasionally, visit our
website at www.kodakverite.com/support for
the latest troubleshooting.
•If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
“Power cycling”
on page 59.
Service Center.
Please confirm the Menu display on the device.
Alignment in progress
<Alignment in progress...>
blinks as pattern 6
– Print jobs cannot start while running alignment.
Run the alignment or run cancel operation on
the device.
Pull out the AC plug.
– Wait at least 30 seconds, then connect the AC
plug back into the socket.
•If this error occurs occasionally, visit our
website at www.kodakverite.com/support for
the latest troubleshooting.
•If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
“Power cycling”
on page 59.
Wi-Fi Module Error:
Unplug and replug the
power cable.
NFC Module Error:
Unplug and replug the
power cable.
Wi-Fi Module Error
Unplug and replug
the power cable.
NFC Module Error
Unplug and replug
the power cable.
and
blink as pattern 1
and
blink as pattern 1
This printer is in the process of Weekly
Maintenance.
– This printer will automatically exit Weekly
Maintenance mode upon completion of
maintenance.
– If this printer receives a print job during Weekly
Weekly Maintenance:
Please wait until the job
is complete.
Weekly Maintenance
Please wait
until the job is
complete.
Maintenance, the print job will be processed
after maintenance completes.
Software Update failed.
– If this error has occurred, visit our website at
www.kodakverite.com/support for the latest
troubleshooting.
“Software Update” on page
52
.
Serious Error
Serious Error
Please refer to
www.kodakverite.com/s
upport.
English
70
Continued on next page.
Improving the print quality
If printout is like below, please try the suggestions in order.
Examples of poor image qualitySuggestions
Faint
1 Using genuine ink cartridges
Refer to “Ordering ink cartridges” on page 58.
»»
2 Checking ink levels
Refer to “Checking ink levels” on page 57.
»»
3 Cleaning the ink cartridge nozzles
Refer to “Clean Printhead” on page 43.
»»
4 Aligning ink cartridges
Refer to “Cartridge Setup” on page 43.
»»
5 Cleaning the ink cartridge nozzles and contacts
Refer to “Cleaning the ink cartridge nozzles and contacts” on page 59.
»»
6 Cleaning the scanner glass (Copy function)
Refer to “Cleaning the scanner glass” on page 60.
»»
7 Cleaning the exterior of the unit
Refer to “Cleaning the exterior of the unit” on page 60.
»»
8 Please change to the higher quality mode. (Faint or white lines)
Refer to “Confirming Printing Preferences for Windows® -Print Quality”
»»
on page 30 or “Confirming Print Settings for Mac -Quality & Media”
on page 33.
Faded colors / Incorrect color
White lines across on the page
No printing results on the page
English
71
Appendix
Specifications
For more product specifications, see the Product Data Sheet at
www.kodakverite.com/support
Technical Data
Dimensions (width x depth x height)
Maximum dimensions (width x depth x height)
Weight9.0 lb. (4.1 kg)
Power requirements100 - 240 V AC (-10%/+10%), 50/60 Hz (+/- 3 Hz)
Operating temperature41 °F (5 °C) to 95 °F (35 °C)
Operating humidity10 – 60 % (no condensation)
Print technologyThermal inkjet
Standard printer language(s)GDI
Print resolution (best)Up to 4800 x 1200(black)
• Technical specifications subject to change without notice.
Note about recycling
• This unit’s packaging materials are recyclable and can
be reused. Please dispose of any materials
in accordance with your local recycling regulations.
• For product recycling information, please visit -
www.kodakverite.com/support click on
Safety Data Sheet (SDS)
To obtain Safety Data Sheets (SDS) for supplies containing chemical
substances (e.g. ink), visit our website at
www.kodakverite.com/support
JF220UA
★★★★★
English
Notes on statutory limitations, data protection and legal
•
validity
The reproduction of certain documents (e.g. by scanning, printing,
copying) is prohibited in many countries. The list of such documents
below is not intended to be complete, it only offers a general
overview. In case of doubt, consult your legal adviser.
– Passports (personal identification)– Entrance and exit visa papers (immigration papers)– Military service documents– Paper Currency, Bank notes, travel checks, payment orders– Postage stamps, tax stamps (stamped or unstamped)– Loan papers, certificates of deposit, bonds– Documents protected by copyright
Neither Funai nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as
a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Funai operating and
maintenance instructions. Funai shall not be liable for any damages or problems arising
from the use of any options or any consumable materials other than those designated
as original products or approved products. Funai shall not be held liable for any damage
resulting from electromagnetic interference that occurs from the use of any interface
cables other than those designated as products.
72
Limited Warranty
Wireless All-In-One Inkjet Printer
FUNAI warrants this Product to be free from malfunctions and defects in both materials and workmanship for one year from the date of
purchase unless the product is sold as refurbished in which case it then comes with a (90) day Limited Warranty.
LIMITS AND EXCLUSIONS:
Warranty service is only available from within the country where the Product was originally purchased. You may be required to ship
Product, at your expense, to the authorized service facility for the country where the Product was purchased.
Funai will repair or replace this Product if it fails to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Funai is
unable to repair or replace a Product, Funai will, at its option, refund the purchase price paid for the Product provided the Product has
been returned to Funai along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole
remedies under this warranty.
If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it
is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of the repair or replacement, whichever is longer.
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was at-
tempted by an unauthorized service center.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover dam-
age which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI, or damage, which
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES, ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI AND ITS REPRESENTATIVES OR AGENTS
SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT
OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Funai
warranty is communicated to the purchaser in writing by a Funai company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
ATTENTION : FUNAI RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or
packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI will not reimburse you for any
service done by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:
Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.