Kodak Verite 55 Plus User Manual

55 Plus

Wireless All-In-One Inkjet Printer

Extended User Guide

?

We’re glad you chose this KODAK VERIT Wireless All-In-One Inkjet Printer.

Need help fast?

Read your Setup Manual and/or Extended User Guide first for quick tips that make using your KODAK VERIT Wireless All-In­One Inkjet Printer more enjoyable. If you have read your instructions and still need assistance, you may access our online help at

www.kodakverite.com/support

or call 1-844-995-6325 (1-844-99KODAK)

Details, explanations, and expressions in the display panel of the actual product may differ from those shown in this
Extended User Guide. The displayed items and specifications are subject to change without notice.

Contents

Introduction ............................................................... 3

Notice and Safety ......................................................................................... 3

Dear Customer ............................................................................................. 3

About this Extended User Guide .............................................................. 3

General safety information ....................................... 4

Overview .................................................................... 7

Control panel & Menu display ................................................................... 8

Meaning of LED behavior and lights ........................................................9

Initial operation ........................................................ 11

Packing contents ..........................................................................................11

Unpack............................................................................................................11

Install ink cartridges ...................................................................................12

Load paper ....................................................................................................13

Turn On the unit ..........................................................................................13

Initial setup .............................................................. 14

Select language ............................................................................................14

Select setup method ...................................................................................14

Cartridge setup ............................................................................................14

Wi-Fi Setup ...................................................................................................15

Network and Password ..............................................................................15

Wi-Fi Protected Setup ................................................................................16

Before you download the printer driver to your PC..............................17

Install the printer driver to your PC .........................................................18

Changing connection type to Wi-Fi from USB connection .................19

Changing connection type to USB from Wi-Fi connection .................19

ECO mode ....................................................................................................20

Making copies ...........................................................31

Copy Setting ................................................................................................ 32

Check ink levels ..........................................................................................34

Scanner .................................................................... 35

Scan in [Scanning] application by Windows® .....................................35

Scan in Mac .................................................................................................36

Settings .................................................................... 38

Maintenance ...............................................................................................38

Paper Setup .................................................................................................39

Network Status ........................................................................................... 39

Wi-Fi Setup ................................................................................................. 40

Enable Wi-Fi ................................................................................................43

Device Setup ...............................................................................................43

Direct Connect Time .................................................................................44

AirPrint .........................................................................................................44

Google Cloud Print™ .................................................................................44

Print Reports ...............................................................................................45

Restore Factory Default ............................................................................46

Web interface ..........................................................47

Confirming the IP Address ....................................................................... 47

Calling the Web interface .........................................................................47

Device Status ..............................................................................................48

Device Configuration .................................................................................48

Network ........................................................................................................48

Mobile ...........................................................................................................49

Order Supplies ............................................................................................49

Software Update .........................................................................................50

Login Password ...........................................................................................50

Print using your smartphone/tablet ........................21

Use the mobile App ....................................................................................21

Mobile connection by NFC for Android™ ............................................. 22

Mobile connection by

(Wireless)..................................................22

Print from a Mobile Device ..................................... 23

Google Cloud Print™ .................................................................................23

AirPrint ......................................................................................................... 23

Check print status from your PC ............................. 24

Status Messenger for Windows® ........................................................... 24

Print media .............................................................. 25

Specifications for print media .................................................................25

Insert paper into the paper support ....................................................... 25

Print settings ........................................................... 27

Confirming Printing Preferences for Windows® .................................. 27

Confirming Print Settings for Mac ..........................................................29

Using Menu display ..................................................31

Service ......................................................................51

Checking ink levels ......................................................................................51

Changing the ink cartridge ........................................................................51

Ordering supplies .......................................................................................52

Fixing a paper jam ...................................................................................... 52

Restoring the factory settings .................................................................53

Power cycling .............................................................................................. 53

Cleaning the printhead nozzles ...............................................................53

Cleaning the ink cartridge nozzles and contacts .................................53

Preserving the ink cartridges ...................................................................54

Cleaning the scanner glass.......................................................................54

Cleaning the exterior of the unit .............................................................54

Periodic maintenance is required ...........................................................54

Important Notice Regarding Printheads ................................................54

Troubleshooting ...................................................... 55

Setup troubleshooting ............................................................................... 55

Status messages, LCD messages and LED behaviors .........................59

Improving the print quality .......................................................................64

Appendix .................................................................. 65

Specifications .............................................................................................. 65

Note about recycling .................................................................................65

Safety Data Sheet (SDS) ...........................................................................65

English

Limited Warranty ....................................................66

2

Introduction

•

•

Notice and Safety

Please read the following instructions carefully before operating the
device and refer to them as needed to ensure the continued safe
operation of your device.

Your KODAK Product and supplies have been designed and tested to
meet strict safety requirements, including safety agency evaluation
and certification, compliance with electromagnetic regulations and
established environmental standards.

The safety, environmental testing and performance of this device have
been verified using approved materials only.

WARNING: Unauthorized alterations, which may include the

addition of new functions or connection of external
devices, may impact the product certification.
Please contact your Customer Support representative
for more information at www.kodakverite.com/support

Dear Customer

You've purchased a very different kind of printer and we are glad you did.
Now we want to help you get started saving on ink and using all of it's
features. This Kodak Verité printer provides quality printing for personal
and office / small business use and it always helps you save on the cost of
printing. For printing, copying and scanning, this all-in-one printer utilizes
the most up-to-date technology. Easy to install ink cartridges are always
provided with our printers; however, you must remove all packaging
used for transportation first. You can find the latest Software drivers and
manuals for the printer on the website:

www.kodakverite.com/support

We hope you enjoy your KODAK VERITÉ Wireless All-In-One Inkjet
Printer and its many functions!

About this Extended User Guide

Read the entire Extended User Guide carefully.
Follow all safety instructions in order to ensure proper operation of your
device. The manufacturer accepts no liability if these instructions are not
followed.

Symbols used in this Extended User Guide

Symbols Description

DANGER

Danger to Persons

This symbol gives warning of danger to
persons. Physical injury or damage can result
from improper handling.

DO NOT TOUCH

This symbol gives warning of danger to
persons. Physical injury or damage can result
from improper handling.

Damage to the Device or Loss of Data

CAUTION C

Note(s) ❏

This symbol gives warning of damage to
the device and possible loss of data. These
damages can result from improper handling.

This symbol designates tips that will help you
to use your device more effectively and easily.

Features

ECO mode

• You can easily save ink consumption.

Refer to “ECO mode” on page 20.

»

Paper requirement

• You can load up to 60 sheets of normal printer paper onto the Paper
support.

Refer to “Specifications for print media” on page 25.

»

ID Card Copy function

• Using the ID Card Copy function, you can copy both sides of a small
document (e.g. business card) onto one page.

Refer to “ID Card Copy” on page 33.

»

Web interface

• The web interface is available to you on all operating systems.
You can access the web interface with an Internet browser on your
PC and conduct many different settings to your device.

Refer to “Web interface” on page 47.

»

Status Messenger (for Windows® only)

• The Status Messenger is available on the operating system.
It is installed together with the printer driver and informs you of the
newest driver, Software or application to download and install.
Also, it shows the present status of the device. You receive detailed
error messages among other things.

Refer to “Check print status from your PC” on page 24.

»

Copying and scanning

• The device also supports copying and scanning of color or black &
white documents. You can scan the document and save it to your
Network PC.

Refer to “Making copies” on page 31 and “Scanner” on page 35.

»

English

3

General safety information

•

•

•

Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.

The material in this Extended User Guide is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.

Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to Funai will be adapted and published on the
Funai support website as soon as possible.

Warranty (Limited Warranty on page 66.)

• DO NOT attempt to take the device apart. There is danger of an
electrical shock. No components are user serviceable. Opening
the device voids the warranty. DO NOT disassemble or remove
covers to the inside of the device. Repairs may only be done by an
Authorized Service Center. Failure to do so shall void any warranty,
stated or implied.

• Any operation expressly prohibited in this Extended User Guide,
any adjustments or assembly procedures not recommended or
authorized in this Extended User Guide shall void the warranty.

• DO NOT make any changes or settings that are not described in this
Extended User Guide. Physical injury or damage to the device or loss
of data can result from improper handling. Take note of all warning
and safety notes indicated.

• DO NOT remove the product label located on the bottom side from
your device; this would void the warranty.

Setting up the device

Please read the following instructions when you set up the device.

• Select a stable location.
Select a level, stable place with adequate space for air circulation.
Make sure to allow extra space to open covers and trays.
The setup area should be well-ventilated and away from direct
sunlight or sources of heat, cold, and humidity. DO NOT set the
device near the edge of your desk or table.

• Place the device on a flat and stable surface.

• The device should be placed securely. If the device should fall, it can
be damaged or can cause injury to people, especially small children.
If the device is dropped it should be inspected by an Authorized
Service Center.

• Position all cables in such a way that no one will stumble on them,
thus avoiding possible injuries to persons or damage to the device
itself.

• Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture. DO NOT place the device in the
vicinity of heaters or air conditioners. Observe the information on
temperature and humidity in the technical data.

• The device must have sufficient ventilation and may not be covered.
DO NOT put your device in closed cabinets or boxes. DO NOT place
the device on soft surfaces such as tablecloths or carpets and do not
cover the ventilation slits. Otherwise the device could overheat or
degrade.

• The area in which you operate the device must be adequately
ventilated, especially if the device is used frequently. Set up your
device in such a way that the Heat or A/C vent's air flow must be
directed away from the work station.

• Never use a gas duster on this device. This gas trapped inside of this
device may cause ignition and explosion.

• In the event that the device becomes too hot, or if you see smoke
coming from the device, you must immediately disconnect the AC
plug from the AC outlet. Have your device examined by trained
professionals at an Authorized Service Center To prevent the spread
of fire, open flames should be kept away from the device.

• DO NOT allow liquids to enter into the device. Disconnect the
device from the AC plug if liquids or foreign objects have entered
the device and have your device examined by trained professionals
at an Authorized Service Center.

• DO NOT allow children to handle the device without supervision.
The packing materials should be kept out of the hands of children.

• DO NOT press forcefully on the scanner lid when you scan thicker
documents or three-dimensional items, this could damage the
scanner lid and/or the scanner glass.

• Make sure to place the device on a desk or table with adequate
strength. DO NOT shake the device as this may cause printing
failure or trouble. DO NOT place the device in a location or
environment of high temperature or high humidity.

Power supply

• Check whether the voltage rating of your device (indicated on the
product label located on the bottom side) is adequate for the power
source available at the setup location.

• DO NOT plug in the device in moist rooms. Never touch the AC
Power cord or the AC plug connection with wet hands.

• Set up your device so that the AC Power cord is easily accessible.
In an emergency, disconnect your device from the power supply by
pulling the AC plug.

• Never touch the AC Power cord if the insulation is damaged. Turn
Off the circuit breaker for that AC outlet.

• Damaged wire could cause fire or electrical shock. Keep the AC
Power cord straight without being twisted, bent or scraped.
Please contact an Authorized Service Center.

• Before cleaning the surface of your device, disconnect it from the
power supply by only pulling the AC plug. Use a soft, lint-free cloth.
Never use liquid, gaseous or easily flammable cleansers (sprays,
abrasives, polishes, or alcohol). DO NOT allow any moisture to
reach the interior of the device.

• In rare cases, the saved settings can be partly or completely reset
to the Factory Default(s) when the AC plug is disconnected or in
the event of a Power outage. DO NOT disconnect the AC plug right
after a print job or after entering settings.

• Press
To completely turn Off the device, you must disconnect the AC plug.
Disconnect the AC plug to shut the device Off when trouble is found
or not in use. The AC Power cord shall remain readily available.

(Power/Standby) to turn the device On or Off (Standby).

CAUTION C

• Turn the device Off (Standby) using
button located on the Control panel of the device before you
disconnect the AC plug from the AC outlet to turn the Unit
completely Off.

(Power/Standby)

English

4

Continued on next page.

•

Federal communications commission notice

•

•

•

•

•

•

•

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.

This equipment may generate or use radio frequency energy.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.

This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an AC outlet on a circuit different from

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Trademark information

All other registered and unregistered trademarks are the property of
their respective owners.

ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and
protect the environment through energy efficient
products and practices.

The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.

The Wi-Fi Protected Setup Identifier Mark is a mark
of Wi-Fi Alliance.

Google Cloud Print™ is a trademark of Google Inc.

AirPrint™ and the AirPrint logo™ are trademarks of
Apple Inc.

Declaration of conformity

Trade Name: KODAK
Responsible party: FUNAI CORPORATION, Inc.
Product Name: VERITE 55 PLUS/37 (US),

Regulatory Model

Address: 19900 Van Ness Avenue, Torrance, CA

90501 U.S.A.
Telephone Number: 1-844-995-6325 (1-844-99KODAK)

For regulatory purpose, this product is assigned a regulatory model name.

The regulatory model name should not be confused with the
product name or product model.

Canadian notice

CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

PC connection

Use only a custom high speed certified USB cable to connect the
device to your PC. The recommendable cable length is no longer than
5 feet (1.5 m).

VERITE 55 PLUS/07 (Canada)

: JM502-10UA

(VERITE 55 PLUS/37, VERITE 55 PLUS/07)

• Windows®, Windows® Server, Windows® Vista, Microsoft Edge,
Internet Explorer® and the Windows logo are trademarks of the
Microsoft group of companies in the United States and/or other
countries.

• Google™, Google Chrome™, Chrome OS™, Google Drive™, Gmail™
and Android™ are trademarks of Google Inc.

• Mac OS®, OS X®,
logo® are trademarks of Apple Inc., registered in the U.S. and other
countries.

• iOS is a trademark or registered trademark of Cisco® in the U.S. and
other countries and is used under license by Apple Inc.

• Intel® Core™ and Celeron™ are trademarks of Intel Corporation in
the U.S. and/or other countries.

Copyright

All other trademarks referenced herein are the property of their
respective owners.

Cables

Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.

Wireless Network

The functioning of security systems, medical equipment or sensitive
devices can be disrupted by the transmission power of the device.
Observe any usage regulations (or restrictions) in the vicinity of such
equipment.

The use of this device can affect the operation of insufficiently
shielded medical devices, hearing aids and pacemakers through the
release of high frequency radiation. Also consult a doctor or the
manufacturer of a medical device to establish whether these are
sufficiently shielded from external high frequency radiation.

iPhone®, iPod touch®, iPad®,

Safari® and Mac

English

5

Continued on next page.

•

Near field communication (NFC)

•

•

•

•

•

•

Near Field Communication (NFC) is a Wireless connectivity
technology that enables convenient short-range communication
between electronic devices.

Using the NFC feature, you can directly print from your smartphone/
tablet simply by holding your smartphone/tablet over the NFC tag on
the device. Make sure you have read all the precautions below before
using the NFC.

– DO NOT place any metallic object on the NFC tag on the device.
– DO NOT place strong magnet on or near the device.
– Make sure to first turn On the NFC feature on your smartphone/

tablet, then hold it within 0.4 inch (10 mm) from the device.

– If the NFC does not work, try moving the position of the

smartphone/tablet.

– DO NOT press your smartphone/tablet hard against the device.

Your smartphone/tablet or the device may be damaged.

– Depending on the material used or the thickness of the

smartphone/tablet cover, connection to the device may be
affected.

Caution when handling ink cartridges

Never open an ink cartridge. Store both new and used cartridges in a
place where they will not come into the hands of children.

Ink cartridge safety

If ink gets on your skin, wash with soap and water. If ink gets into
your eyes, flush immediately with water. If any discomfort or change
in vision persists after washing, seek medical attention immediately.

For Safety Data Sheets (SDS) on inks, go to

www.kodakverite.com/support

LCD (liquid-crystal display) safety

Use only a dry, soft cloth to clean the LCD. DO NOT use any liquid or
chemical cleaners. If the LCD is damaged, contact Customer Support
immediately. If any of the solution from the display gets on your
hands, wash them thoroughly with soap and water.

If the liquid crystal solution gets into your eyes, flush your eyes
immediately with water. If any discomfort or change in vision persists
after washing, seek medical attention immediately.

About the Software

When carrying out a Software update only use the Printer Software
Upgrade file for your device from the website:

www.kodakverite.com/support

Using other Software files can lead to your device not functioning
properly. Funai accepts no liability for device malfunctions which can
be traced back to the use of third party Software.

Copying and Scanning precautions

Be aware that scanning, photocopying, or editing any of the following
may be punishable by law.

Copyrighted work

Unauthorized reproduction of copyrighted work is prohibited except
for personal/domestic use or use in a limited extent based on that
purpose.

Reproducing a photographic portrait may also be subject to
punishment.

Currency, securities, etc.

Forging any of the following to use as genuine articles or producing
misleading articles is subject to punishment by law.

• Banknotes, paper currency, coins (including foreign currency)

• Government bonds, territorial bonds

• Postal money order certificates

• Postal stamps, documentary stamps

• Capital stock certificates, debenture stock certificates

• Bills, checks

• Commuter passes, coupon tickets

• Other valuable paper

Official documents

Forging any of the following to use as genuine articles is subject to
punishment by law.

• Licenses, copies of corporate registration, and other
certifications/documents issued by public officials or
government offices.

• Agreements/contracts, documents of “rights and obligations”,
etc. for proof of facts created by private individuals.

• Seals, signatures, or symbol marks put on by public officials.

• Private seals and signatures

Relative laws

Criminal code, Copyright law, Act on Control of Imitation of
Currency and Securities, Alteration and Imitation of Coins, Money
Bills, Banknotes and Securities Circulating in Foreign States,
Postal Act, Act on Control of Imitation of Postal stamps, Act
on Punishment of Crimes Related to Stamps, Act on Control of
Imitation of Stamps.

When paper jam has occurred

In case of a paper jam, remove the paper carefully out of the unit.
Throw the paper away carefully.
DO NOT make any repairs to the unit yourself. Improper

maintenance can result in injuries or damage to the unit. Only have
your device repaired by an Authorized Service Center.

English

© 2016 Funai Electric Co., Ltd. All rights reserved.

The Kodak trademark and trade dress are used under license from
Eastman Kodak Company.

Funai is a registered trademark of Funai Electric Co., Ltd. and may not be
used in any way without the express written consent of Funai.

No part of this manual may be reproduced, transmitted, disseminated
or transcribed, in any form or for any purpose without the express prior
written consent of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai
reserves the right to change the content herein without the obligation to
notify any person or organization of such changes.

6

Overview

•

•

•

When opening the lid/door

8

Scanner glass

Front view

1

Paper support

2 Paper guide

3 Scanner lid

4 Paper exit tray

5 Exit tray extender

6 Menu display

7 Control panel and LEDs

1

2
3

4
5

9 Ink door

10 Ink cartridge holder

9

8

6

10

7

Rear view

11

AC Power cord and AC plug

12 Printer USB port — USB connection for your PC

English

11

12

7

Continued on next page.

Control panel & Menu display

•

•

1 Menu display
2 (up) button

3 button
4 (back) button

5 (down) button

6 (Wireless) LED and button

7 (ECO) LED and button

8 (Copy) button

9 (Power) LED and Power/Standby button

6
7
8

9

LEDs

Note(s) ❏

• You can find the meaning of status and error lights in “Meaning

(Wireless)

(ECO) — Indicates ECO mode

(Power Yellow) — Indicates the present unit's status.

(Power Red) — Indicates the error status

of LED behavior and error lights” on the next page. Please also
note the messages displayed in the web interface, or in the
Status Messenger (for Windows® only) on your PC.

— Indicates the connection status of the

Wireless Network and Easy Simple
Print.

e.g.) power supplied, working

Buttons

(up)

(down)

(back)

(Wireless)

1

2
3

4
5

(ECO)

(Copy)

(Power/Standby)

— Use to select an item, set number of

copies, or to select a letter on the Menu
display.

— Use to confirm the current selection.

— Use to

· return to the previous screen

· cancel a current job

· delete the letters when inputting

· change the password

· cancel a WPS process

— Use to connect to the Wireless Network.

Wireless feature: On

· Press and hold (less than 3
seconds): establishes Wireless
Connection to the mobile device
using 'Easy Simple Print'.

· Press and hold (until the screen
of the Menu display switches):
establishes Wireless Connection
screen. Follow Step 2-4 in “Wi-Fi
Protected Setup” (left column) on
page 41.

— Use to shift ECO mode.

— Use to

· start a print job with the current
selection

· change deleted letters when
inputting

Unit status: ready

· Press and hold (less than 3
seconds): starts copying.

· Press and hold (longer than 3
seconds): starts printing the
configuration report.

— Press to change the power state.

Press and hold (3 seconds or less): enters
Sleep mode or wake On.

Press and hold (3 seconds or more): turns
the power Off. Make sure that you need
to turn the unit back On once if the unit is
in Sleep mode.

Note(s) ❏

• The function carried out will vary, depending on the unit’s status
when you press a button.

English

8

Continued on next page.

Meaning of LED behavior and lights

•

Wireless LED — indicated by

ECO LED — indicated by

Power LED — indicated by

LED lighting patterns

Blinking 1
Blinking 2
Blinking 3
Blinking 4 Blinking very slowly

LED(s) Behavior Meaning / Possible cause(s)

All LEDs No light

All LEDs

Lights up for 1 sec.
Lights up very rapidly
Blinking very rapidly 2 times

Lights up

and

Blinking 9

Lights up

Blinking 5

Blinking 1

No light for 1 sec.

No light for more than 1 sec.

No light for 1 sec.

Unit status

Unit is turned Off
or in Sleep mode, a mode which is effective in saving power.

Even in Sleep mode, the unit is able to receive a print job from USB/Network equipment.
Unit is Starting.

When you turn On, KODAK Logo with "Starting Up" and the progress bar (
the Menu display.

Indicates that the unit is Ready.
The unit is able to receive a print job.

This Yellow LED behavior is also used when copying, scanning or canceling copy or scan.
Indicates that the unit is Running.

This Yellow LED behavior is used when printing, canceling a print job and after the print jobs are received,
running the alignment process (While running the alignment process, any new print job received will start
printing after the alignment process is done. (The print job is not effected while the unit is scanning the
alignment pattern.)).

This Yellow LED behavior is used when updating Software, restoring factory default, performing weekly
maintenance.

Blinking 5 Blinking slowly
Blinking 6 Blinking rapidly
Blinking 7 Blinking very rapidly
Blinking 8
Blinking 9 Blinking slowly (in Power-on mode)

Blinking very rapidly 4 times

No light for 2 sec.

       ) will be displayed on

English

Red Blinking 1

System error occurred.
Refer to page 59.

9

Continued on next page.

ECO mode status

LED(s) Behavior Meaning / Possible cause(s)

No light Indicates that ECO mode0 (ECO Off).

Lights up Indicates that ECO mode1 is ON (Save 20% ink).

Lights up Indicates that ECO mode2 is ON (Save 20% ink, page reduce 12%).

Network status

LED(s) Behavior Meaning / Possible cause(s)

Lights up The unit is connected to the Network using a Wireless connection.

Blinking 2

Blinking 3

No light

Blinking 1

Blinking 7

Blinking 5

Blinking 1 Indicates that the unit needs confirmation to start the Google Cloud Print™ registration.

Blinking 7

Blinking 8

Blinking 1 (alternate

Yellow and Red)

Indicates that the unit started to connect to the Network using a Wireless connection or WPS (Wi-Fi Protected
Setup) connection.
The unit is not connected to the Network yet.

Indicates that the unit is in Easy Simple Print and there is no connection point.
Connection with Network equipment is not established yet.

Indicates that Wireless connection is Off.
The unit is not connected to the Network.

Indicates that the unit is directly connected to your smartphone/tablet using Easy Simple Print connection.
The unit is connected to the Network using Easy Simple Print.

Indicates that the Network connection has become unavailable and the unit is not currently connected to the
Network.

Indicates that the unit is in process of the Google Cloud Print™ registration.
Proceed to Google account registration and register this unit to your Google account.

Indicates that the WPS connection failed.
The unit detected the Router, but failed to establish a connection.

Indicates a session overlap error.
The session overlap error occurred because two Routers started the Wi-Fi Protection Setup simultaneously.

Indicates that the unit received an identification request for AirPrint from a Mac.

English

10

Initial operation

1

2

What's In The Box
Whats

In

The

Box

Wireless Printer

Verité 55W Eco/Verité 55 Eco/Verité 55 Plus

J

F230/JF240/JF210UA

★★★★★

30+

T

urn

p

ower o

n

ES

Encender la energía

FR

Mettezl'appareilenm h

Unpack
Unpack

ES

Desempaque
Desempaque

FR

Déballez
Déballez

GET STARTED HERE!

a

b

2

1

c

COLOR

BLACK

BLACK COLOR

*

USB ca

bl

e not inc

l

u

d

e

d.

ES

*

C

a

bl

e

U

SB no inc

l

ui

d

o.

FR

*Câble USB non com

p

ris

.

•

•

1

2

What's In The Box

Whats

In

The

Box

Wireless Printer

Verité 55W Eco/Verité 55 Eco/Verité 55 Plus

1

2

What's In The Box

Whats

In
The
Box

W
i
rel

e
ss
P
r
inter

Ver
it
é 55W Ec

o
/

V
erité
55
E
c

o
/Ver
it
é
55

P
lus

J

F230/JF
24
0/J
F
210UA

★★
★
★★

3

0+






T

u
rn

p

ow
er o

n

ES

Encender la energía

FR

Mettez
l'
app
a
r
e
ilen

m
h

Unpack
Unpack

E
S

Desempaque
Desempaque

F
R

Dé
b
al
lez

Dé
b
al
lez

GET STARTED HERE!

a

b

2

1

c

CO
L
OR

B
LAC

K

BLACK

COLOR

*

USB ca

bl

e
n
ot inc

l

u

d

e

d.

ES

*

C

a

bl

e

U

SB no in
c

l

ui

d

o.

FR

*Câbl

e
U
S
B
non
c
om

p

ris

.

JF230/

JF240/

/

J

F210U

A
/

★★★★

*2PMH00379A*

T

urn

p

ower o

n

ES

Encender la energía

FR

Mettez l'appareil en marche

Unpack

ES

Desempaque

Desempaque

FR

Déballez

Déballez

GET STARTED HERE!

a

1

2

Wh
a
t'
s
In The Box

Wh
a
ts
I
n
The
Bo

x

Wireles
s
Printer

Verité 55W Eco/Verité 55 Eco/Verité 55

P
lus

J

F
2
30/JF240/JF210UA

★★★★★



3
0
+





T

ur
n

p

ower o

n

ES

En
c
end
e
r
l
a energ
í
a

F
R

Met
t
ez
l
'
appareil en ma

r
c
he

U
np
a
c
k

U
np
a
c
k

ES

Desempaque
Desempaque

FR

Déba
l
lez

Déba
l
lez

GET STARTED HERE!

a

b

2
1

c

CO
L
OR

BL
A
CK

B
LACK

COL
OR

*

USB ca

bl

e not
inc

l

u

d

e

d
.

E
S

*

C

a

b
l

e

U

S
B n
o
in
c

l

ui

d

o.

FR

*
C
â
b
le
U
SB n
on
c
o
m

p

r
is

.

b

2

1

c

COLOR

BLACK

BLACK COLOR

*

USB ca

bl

e not inc

l

u

d

e

d.

ES

*

C

a

bl

e

U

SB no inc

l

ui

d

o.

FR

*Câble USB non com

p

ris

.

Packing contents

1 Unit
2 Setup Manual (Including Safety Sheet and Limited Warranty)
3 Black/Color ink cartridges

(Verité55 Plus: XL, Verité55 XXL Plus: XXL, Verité55 Mega Plus: 3XL)

1

Removing packaging material from the unit

1

Remove tape and the plastic bag from the unit and then take the
twisted wire from the AC Power cord.

2 Lift the paper support up, take the Setup Manual off the unit and

then remove the tape including the white paper.

3 Open the Scanner lid, then remove the protective paper.

2

3

5

L

BLACK

Note(s) ❏

Missing package contents

• If any of the parts are missing or damaged, please contact an
Authorized Service Center.

Unpack

Remove the unit and ink cartridges from the box.

Black

Color

Ink Cartridges

L

5

BLACK

L

5

COLOR

Verité 55 Plus : XL
Verité 55 XXL Plus : XXL
Verité 55 Mega Plus : 3XL

5

L

COLOR

2

ColorBlack

1

2

1

English

11

Continued on next page.

Install ink cartridges

•

2

XL

1

XL

5 Set the color ink cartridge all the way into the cartridge slot on the

right side.

Install ink cartridges to ink cartridge holder

1

Remove the black and color ink cartridges from packaging.

5

BLACK

■■

L

2 Remove the plastic tape on the black and color ink cartridges using

the red pull tab.

DO NOT TOUCH

• DO NOT TOUCH the gold contact area on the back or the
metal nozzles on the bottom of the cartridge.

5

COLOR

■■

L

ColorBlack

Color

Black

(Right)

(Left)

S

S

S

l

l

l

S

S

S

e

e

e

d

d

d

i

i

i

d

d

d

i

i

i

l

l

l

1

2

6 Set the black ink cartridge all the way into the cartridge slot on the

left side.

7 Push and click the Cartridge tab to close the cartridge slot until the

cover snaps securely into position.

e

e

e

3 Lift the Ink door to access the cartridge slot.

1

2

4 Press the Cartridge tab to open the cartridge slot.

C

C

l

l

i

i

c

c

k

k

!

!

8 Close the Ink door.

CAUTION C

Ink Cartridge Not Inserted Correctly!

• If the Ink door does not close properly, the ink cartridges are
not inserted correctly. Remove the ink cartridges and then
insert them again.

Green

s

s

s

s

e

e

!

!

r

r

P

P

English

12

DO NOT PUSH the green/blue
parts at the same time.

Blue

Continued on next page.

Load paper

•

Turn On the unit

Set paper into the paper support

1

Slide the paper guide to the left first.

2 Fan the plain paper to be printed and then tap the paper sheets so

the ends are the same.

3 Set the plain paper (Letter or A4 size 20 lb. or 75 g/m

paper support. You can load up to 60 plain paper sheets. Slide the
paper guide firmly against the edge of the paper.

2

) into the

1 Connect the AC plug to the AC outlet.

2 Press and then (Power) LED will light up, when the

unit is turned On.

2

4 Open the paper exit tray and the exit tray extender.

1

2

1

Note(s) ❏

Loading Paper

• You can load up to 15 index cards or postcards, 10 glossy paper
sheets or 5 envelopes on the paper support.

Refer to “Print media” on page 25.

»

English

13

Initial setup

English

Español
Français

Language

OK

LCD setup,
Press .

Using PC/Mobile APP,

Detail [ ].

PC/APP Next

Initial setup

OK

OK

Step 1 of 5 :

For best results,

please proceed with

cartridges setup.

Cartridge Setup

OK

NextSkip

Step 2 of 5 :

Test Print

Cartridge Setup

Step 3 of 5 :

Place test print on

WKHXSSHUOHFRUQHU

of scanner. Press .

Cartridge Setup

OK

OK

ScanBack

Step 4 of 5 :

Test Scan

Cartridge Setup

Step 5 of 5 :

Cartridge Setup

complete.

Cartridge Setup

OK

Next

Select language

1 Press to select the desired language, then press .

• After initial setup, if you would like to change to another
language, refer to “Language” on page 43.

Select setup method

1 Press if you continue the Initial setup by using Menu display

on this unit.

• You can also setup by downloading APP with your smartphone/
tablet or PC. Press
with other devices.

to read the explanation how to setup

3 Open the scanner lid and place the alignment pattern paper facing

down on the scanner glass, then press
scanner lid.

&

&

e

e

s

s

r

r

e

e

v

v

e

e

c

c

e

e

a

a

l

l

R

R

p

p

after closing the

4 The unit will start scanning the alignment pattern to set an

appropriate alignment on this unit.

Cartridge setup

1 [Cartridge Setup] screen will be displayed on the Menu display.

Make sure plain Letter or A4 size paper is loaded in the paper
support, then press

.

5 When alignment is completed, [Cartridge Setup complete.]

message will be displayed on the Menu display, then press

Note(s) ❏

• Make sure to use only blank paper (sold separately).
Never use colored or patterned paper when you set the
alignment.

.

2 The unit will start printing the alignment pattern.

English

14

Continued on next page.

Wi-Fi Setup

Network and Password

Wi-Fi Protected Setup
Skip

Wi-Fi Setup

OK

Network and Password

Wi-Fi Protected Setup
Skip

Wi-Fi Setup

OK

Router1

Router2
Router3
Router4

Network and Password

Network and Password

Enter Password

a bcdefghij

klmnopqrst
u v w x y z a/A/1/+

<>Done

SSID: Router1
Password:
Xaxswordxssdaa123456

Network and Password

OK

ContinueBack

Connected to

Router1

Press to print report.

Press to continue.

Network and Password

OK

OK

Continue

Print

Select Wi-Fi Setup type and follow the Menu display instructions.

Note(s) ❏

• The factory default Network connection method is a DHCP
connection (automatic acquisition).

• If you would like to set the IP address manually, refer to below.

– You can setup from the Menu Control Panel, then select the

[IP Address]. IP Address...Navigate to [Home > Setup > Wi-Fi
Setup > IP Address] and press

Refer to “Wi-Fi Setup - IP Address” on page 41.

»

• When performing Network connection, make sure the unit is not
placed too far away from the access point/router and the access
point/router is powered On and its settings are correct.
If you need additional help on Network problems, visit our
website at www.kodakverite.com/support

.

3 [Enter Password] will appear on the Menu display, then enter

Password. Press
After entering the Password, press
then press

.

• If you would like to use capital letters, numbers or symbols
[a/A/1/+], press

• When you enter a wrong letter, then you can erase it by pressing

.

to select a letter, then press .

to select [Done],

.

4 Confirm the SSID name and Password displayed on the Menu display,

then press

. The unit will start connecting to the router.

Network and Password

1 If you would like to connect to a router manually, press

to select [Network and Password], then press

2 SSID names of routers are listed on the Menu display. Select the

SSID that you would like to connect, then press

• If the SSID that you would like to connect to is not displayed in
the list, select [Other] then press
then select the SSID security type.

Back

Select

OK

. Enter the SSID name,

.

.

5 [Connected to ...] message will appear on the Menu display

when the Connection is successful. Press
Connection setting is completed.

Refer to “Wi-Fi Setup - Network and Password” on page 40.

»

twice, then the

English

15

Continued on next page.

Wi-Fi Protected Setup

Network and Password

Wi-Fi Protected Setup

Skip

Wi-Fi Setup

OK

Connected to

Router1

W

i-Fi Protected Setup

OK

Next

3XVK:36EXRQ

on Wi-Fi router.

Router1

W

i-Fi Protected Setup

Cancel

1 Press to select [Wi-Fi Protected Setup] then press .
2 Press the WPS button on router.

*

WPS

WPS

Router1

How long the WPS button must be pressed and other specifics vary

depending on the router type. Please refer to your router’s manual.

If you would like to setup Wi-Fi later...

1 Press to select [Skip] then

press

twice.

Wi-Fi Setup

Network and Password
Wi-Fi Protected Setup

Skip

OK

Wi-Fi Skipped

To install Wi-Fi later,

go to

the Wi-Fi setup menu.

BackOKContinue

2 Press to go to [Home].

Note(s) ❏

• If you do not want to setup the Wi-Fi now, you can setup later
after the initial setup is completed.

Refer to “Wi-Fi Setup” on page 40.

»

English

16

Continued on next page.

Before you download the printer driver to your PC

•

•

•

•

Requirements

Your PC must have one of the following operating systems.

Microsoft® Windows®

OS Version Processor Browser USB port

Windows® 10

Windows® 8.1

Windows® 8
Windows® 7

Windows® Vista

Windows® Server 2012

Windows® Server 2008

Apple Mac OS

OS Version Processor Browser USB port

OS X v10.11

(El Capitan)

OS X v10.10

(Yosemite)

OS X v10.9

(Mavericks)

OS X v10.8

(Mountain Lion)

•

Make sure that your PC is turned On and you are logged on with
administrator rights.

• In this Extended User Guide, the file extensions of the programs,
files are omitted. If you set your PC to show the file extensions, the
program and file names appear to be different from those described
in this User Guide.

•

In this Extended User Guide, the appearance of the screen images
are based on Windows® 10; however, other operating systems (e.g.,
Windows® 8, etc.) provide basically the same operations. (There
may be programs and functions named differently.)

CAUTION C

• If there are any programs running, close them first.

• The screens may differ depending on your operating system.

32-bit (x86) or

64-bit (x64)

Intel® Core™

Processor

Microsoft

Edge

Internet

Explorer®

Safari

USB 2.0

High Speed

or

Full Speed

USB 2.0

High Speed

or

Full Speed

How to download the printer driver

1

From your computer go to www.kodakverite.com/support and
confirm that the “DOWNLOADS” tab is selected.

2 Select [Verite55 Plus] from the pulldown menu of “Select Model

Number”.

3 Select "Drivers and Software", then follow the Instructions on your

computer.

Windows10

Compatible

Download

Download the printer driver installer file to your PC.

Extraction of printer driver installer

For Windows® users

1 Double-click on the downloaded installer file to extract it.

KODAKVERITE55PLUS-vxxxxx.exe

Driver’s version

2 If “User Account Control” window appears, click “Yes”.

English

For Mac users

1 Double-click the downloaded installer file to mount it.

KODAKVERITE55PLUS-vxxxxx

Driver’s version

17

Continued on next page.

2 The following window will appear.

Double-click on [KODAK-VERITE 55 PLUS Installer.mpkg].

Note(s) ❏

• If the installer does not start when you double-click [KODAK­VERITE 55 PLUS Installer.mpkg], please try the following steps:

1 Select [System Preferences] in the Apple Menu. The Apple

Menu is located on the top left of the screen. Click the Apple
icon to display the pull-down menu.

2 Click [Security & Privacy].
3 Click the [General] tab and you will see the [Allow application

downloaded from:] option. If the setting is locked, please
unlock it. The Lock icon is displayed on the bottom left of the
[Security & Privacy] window. Click the lock icon to unlock.
You may be required to enter the login password to proceed.

4 Select [Anywhere] from options listed. For more information,

visit our FAQ on the website at - www.kodakverite.com/support

3 The unit's serial number will appear when the PC finds the unit.

Select the serial number, then click "Next".
The unit's serial number is located on the sticker on the back side of the unit.

4 The following guidance will appear when the printer driver is

installed to your PC successfully.

• Click "Test Print" to make sure the printer driver installed properly.
(for Windows®)

Install the printer driver to your PC

There are two ways to connect to the unit.

Using Wi-Fi (Recommended)

• When the Network detects the unit, this unit's serial number will
appear on the Menu display.

• Once you double-clicked the printer driver installer, the printer driver
starts to install to your PC through the Wi-Fi connection. Select this
unit's serial number to complete the printer driver installation.

1 The following guidance will appear while the PC is searching the Network.

Using USB Printer cable

• If you have connected between the unit and your PC by using the
USB cable (sold separately), this connection has priority.

• Once you double-clicked the printer driver installer, the printer driver
automatically starts to install to your PC without any guidance.

1 The following guidance will appear when the printer driver is

installed to your PC successfully.

• Click "Test Print" to make sure the printer driver installed properly.
(for Windows®)

2 If your PC cannot find the unit, the pop-up menu will appear for 5

seconds. Click the instruction for the connection method you have
chosen, then read the help text for more details.

English

18

Continued on next page.

Changing connection type to Wi-Fi from USB connection

USB has priority always.
If you would like to change the connection type to Wi-Fi from USB

connection, refer to the following instructions.

Microsoft® Windows®

1 Disconnect the USB cable between this unit and your PC first.
2 Click [Start].
3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer

re-search].

4 Change the connection type automatically.

6 Click the printer, select the driver from pull-down menu [Use], then

click [Add].

• Make sure to choose FUNAI KODAK VERITE 55 PLUS of

[Bonjour Multifunction] in [kind].

7 Select [FUNAI KODAK VERITE 55 PLUS] added.

Changing connection type to USB from Wi-Fi connection

If you would like to change the connection type to USB from Wi-Fi
connection, refer to the following instructions.

Microsoft® Windows®

1 Connect the USB cable between this unit and your PC first.
2 Click [Start].
3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer

re-search].

4 Change the connection type automatically.

Apple Mac OS

1 Follow step 1 of "

USB Printer cable" on page 18.

Install the printer driver to your PC

" for "Using

2 Disconnect the USB cable between this unit and your PC.
3 Activate [System Preferences].
4 Click [Printers & Scanners].

5 Click [+] > [Add printer or Scanner...].

Apple Mac OS

1 Follow step 1 of "

Wi-Fi (Recommended)" on page 18.

Install the printer driver to your PC

2 Connect the USB cable between this unit and your PC.
3 Activate [System Preferences].
4 Click [Printers & Scanners].

" for "Using

English

19

Continued on next page.

5 Click [+] > [Add printer or Scanner...].

•

6 Click the printer, select the driver from pull-down menu [Use], then

click [Add].

• Make sure to choose FUNAI KODAK VERITE 55 PLUS of

[USB Multifunction] in [kind].

7 Select [FUNAI KODAK VERITE 55 PLUS] added.

e. g. 2) Poster

e. g. 3) Resizing (Paper : A4 Fit to paper size : A5)

e. g. 4) Layout : 2-up

ECO mode

You can easily save on ink consumption .

ECO mode status

Mode Ink Density Print Size

100% 100%

ECO mode 0 (ECO Off)

80%

SAVE 20%!

ECO mode 1

80%

SAVE 20%!

ECO mode 2

• The current setting mode and the description will appear on the
Menu display.

• For ECO mode 2, the print size is reduced 94% vertically and
horizontally to the center of the image.

e. g. 1) Paper size : Letter

SAVE 30% in total!!

100%

88%
(Reduced 12%)

• Selecting ECO mode, you can automatically save ink and reduce the
size of your print.

• You can also select ECO mode under Printer Preferences of your PC.

• If you set photo print borderless, the print size is not reduced.
If the printer goes into Sleep mode or is turned Off, ECO mode will

•
return to its default setting of OFF.

English

20

Print using your smartphone/tablet

•

•

'Easy Simple Print' can print the data in your smartphone/tablet
directly to the unit.
Printing is also available by using the mobile App for Android™ or
iOS. For more information, read the following requirements and usage
for your smartphone/tablet.

Requirements

Your smartphone/tablet must have one of the following operating
systems.

Android™

Use the mobile App

Printing using the print application is available.

How to download the mobile App

1

From your mobile device go to www.kodakverite.com/support

2 Confirm that the “DOWNLOADS” tab is selected, then select

[Verite55 Plus] from the pull-down menu of “Select Model
Number”.

3 Select “Connect your Mobile Device”, then follow the Instructions.
4 Install Printer App on your smartphone/tablet using process

defined by App Site.

OS Version Memory required

Android™ 4.0.3 or later

iOS

OS Version Memory required

iOS 6.1 or later

(iPhone, iPod touch, iPad)

• In order to download the mobile App, you will need a Google
Account or an Apple ID. If you have NFC-supporting device, you
can set the mobile App for Android™ by simply placing your
smartphone/tablet near the NFC tag on the unit.

Refer to “Mobile connection by NFC for Android™” on page 22.

»

5 MB or more

free space

5 MB or more

free space

Recommended

product specification

NFC

Built-in camera

Wi-Fi

Recommended

product specification

Built-in camera

Wi-Fi

Note(s) ❏

• Connect your mobile to the same Wireless Network that your
unit is using.

5 When the install icon appears on your smartphone/tablet display,

then tap the install icon.

• Please visit our website for more information about the mobile App

- www.kodakverite.com/support

English

Note(s) ❏

• The mobile App's name and screen images display the current
version. They may be changed due to updates.

21

Continued on next page.

Mobile connection by NFC for Android™

Mobile connection by (Wireless)

Note(s) ❏

• Check whether your Android™ smartphone/tablet supports NFC
first.

1 Place your Android™ smartphone/tablet near the NFC tag on the

unit.

2 Your Android™ smartphone/tablet will be connected to the

website (Play Store) where you can download the mobile App.

3 Install the mobile App.
4 After installation is completed, place your Android™ smartphone/

tablet near the NFC tag again. The mobile App will run and your
Android™ smartphone/tablet will automatically connect to the
unit.

Note(s) ❏

• Check whether your smartphone/tablet supports QR code
reading first.

1 Scan the QR code below (or on the Setup Manual) with your

smartphone/tablet and visit the address obtained.

1

2

2 Your smartphone/tablet will be connected to the website (store)

where you can download the mobile App.

3 Install the mobile App.
4 After installation is completed, run the mobile App and follow its

directions and press
smartphone/tablet with the unit.

(Wireless) in order to connect your

•
lighting when the connection is completed.

• From the next time on, you can connect simply by tagging the
NFC once on the unit.

(Wireless) LED will change from blinking to steady

Note(s) ❏

• This unit allows you to directly print from your Android™
smartphone/tablet simply by holding your Android™
smartphone/tablet over the NFC tag on the unit.

• Using the NFC does not require installing print driver or
connecting to an access point. You will only need an NFC
supported Android™ smartphone/tablet.

• Depending on the material of the Android™ smartphone/tablet
cover, NFC recognition may not work properly. (e.g. Chromium
plating)

• Only Android™ 4.1 or higher will automatically enable the
Wireless direct feature on your Android™ smartphone/tablet
when you enable the NFC feature.

•
lighting when connection is completed.

• If your smartphone/tablet and the unit have already connected

to the same router (Network), you do not need to press
(Wireless).

• From the next time on, you do not need to scan the QR code.
Simply run the mobile App, then follow its directions and press

unit.

(Wireless) LED will change from blinking to steady

(Wireless) to connect your smartphone/tablet with the

Note(s) ❏

• QR code (Quick Response code) is a type of two-dimensional
barcode that can be read using smartphones/tablets.

English

22

Print from a Mobile Device

This unit supports Google Cloud Print™ and iOS / OS X AirPrint.

Google Cloud Print™

Google Cloud Print™ is a service provided by Google that allows
you to print to the unit registered to your Google account using a
Network-compatible device (such as a smartphone/tablet or PC),
without installing the printer driver on the unit.

Refer to “Google Cloud Print™” on page 44.

»

Google Cloud Print™

Note(s) ❏

• In order to use Google Cloud Print™, you must have a Google
account and sign in to your account.

• Make sure the unit and your smartphone/tablet or PC are
connected to the Internet.

Supported operating systems and applications

Google Cloud Print™ is compatible with the following operating
systems and applications:

Supported operating systems

– Chrome OS™
– Android™ 2.1 or later
– iOS 3.0 or later

AirPrint

With iOS / OS X AirPrint, you can print photos, emails, web pages,
and documents wirelessly from your Apple devices (iPhone, iPod
touch,

iPad).

iOS / OS X AirPrint does not require a driver to be installed.

Refer to “AirPrint” on page 44.

»

Note(s) ❏

• Your Apple devices need to be connected to the same Wireless
Network that your unit is using.

WPS

Supported operating systems

Following Apple devices running the latest version:

– iPhone (3GS or later)
– iPod touch (3rd generation or later)
– iPad (all models)
– OS X (v10.7 or later)

• For more information about AirPrint, visit website at -

www.kodakverite.com/support

1

Applications that can be used for printing

– Applications for Chrome OS™
– Google Chrome™ browser
– Google Drive™ for mobile
– Gmail™ webmail service for mobile

• For more information about Google Cloud Print™, visit website at -

www.kodakverite.com/support

1

2

3

4

1 Click [RESOLUTION CENTER]
2 Select [Verité 55 Plus] from pull-down menu.
3 Select [Software - How to].
4 Select [Google Cloud].

2

3

4

1 Click [RESOLUTION CENTER]
2 Select [Verité 55 Plus] from pull-down menu.
3 Select [Mobile].
4 Select [Printing].

English

23

Check print status from your PC

•

Status Messenger for Windows®

The Status Messenger application automatically displays an error
when a unit error has occurred. It is installed together with the printer
driver, and is added to the Start-up program by default, so it will
automatically launch at startup. It can also be activated from the
Windows Start Menu. When the Status Messenger is activated, an
icon appears in the Windows® system tray.

Normal state:
Error or Warning:
For example, if there is no paper in the paper support, an error occurs

when you try to print...

A

A pop-up appears from the system tray icon to provide immediate
error notification. If you click on the pop-up, an error recovery guide
appears so that you can confirm a detailed explanation on how to fix
the problem.

Color: Green
Color: Red

Error Message

Status Messenger Settings

To configure the Status Messenger, right click on the icon in the
system tray and select [Settings].

Right click

You can change the following items in the Status Messenger Settings.

• Alert me when a problem prevents printing

When checked: A message will pop up when an error occurs.

• Alert me when my supplies are low

When checked: A message will pop up when information is available.

•

Show me detailed status about my supplies.

When checked: Status Monitor Center will be launched by clicking on
the pop-up or the icon in the Windows® system tray.

Settings for pop-up message and detailed information display can be
configured in Status Messenger Settings.

For how to configure the settings, refer to the following instructions.

English

24

Print media

Specifications for print media

You can setup normal printer paper, envelopes or printed documents
(forms) into the paper support.

Paper support

Paper Sizes Letter · Legal · Executive · Statement · A4 · JIS B5 · A5 ·

A6 · Postcard (
5x7 in.(2L) · 3.5x5 in.(L) · Hagaki · Envelope #10
Envelope DL · Envelope C5

Weight Plain paper: 17 - 24 lb. (64 - 90 g/m

Cards: 90 - 110 lb. (163 - 200 g/m2)
Envelopes: 20 - 24 lb. (75 - 90 g/m
Photo paper: 50 - 65 lb. (180 - 240 g/m2)

Capacity Plain paper (20 lb. or 75 g/m

Cards (110 lb. or 200 g/m2): Up to 15
Envelopes (24 lb. or 90 g/m2): Up to 5
Photo paper (65 lb. or 240 g/m2): Up to 10

• Borderless printing is supported with paper sizes Letter, A4, A5, A6,
3x5 in., 4x6 in., 5x7 in., and Hagaki, when printing from your PC.

4x6 in.) · Index Card (3x5 in.)

2

): Up to 60

2

)

2

)

Insert paper into the paper support

1 Slide the paper guide to left side.

2 Fan the plain paper to be printed and then tap the paper sheets so

the ends are the same.

CAUTION C

Unsuitable Paper!

• DO NOT insert any sheets of paper into the paper support…

- that are wet, have been edited with correction fluid, are soiled
or have a coated surface.

that are held together with office or notebook staples or with

-
tape or glue.

- that are pasted with note paper.

- that are creased, crumpled or torn

- that are curled.

0.08 inches (2 mm)
or more

Forms from a Laser Printer!

• Forms that have been printed out by a laser printer are not
suitable for further printing.

3 Insert the paper into the paper support. You can load up to 60

plain paper sheets (20 lb. or 75 g/m
against the edge of the paper.

2

2

). Slide the paper guide firmly

1

Note(s) ❏

Curled Paper

• If paper is curled, use it after flattening paper. 0.08 inches (2
mm) or more curl may cause paper jam.

Storing Paper

• To avoid curling, when you do not use the unit, unused paper is
put into package, please keep it in a flat state. And also, store it

avoiding heat, humidity, and direct sunlight.

English

25

Continued on next page.

4 Open the paper exit tray and exit tray extender.

Loading Pre-printed Material

• If you would like to print on an input sheet (for example, forms or
stationery), place the input sheet with the Pre-printed side facing
forward in the paper support.

CAUTION C

Forms from a Laser Printer!

• Forms that have been printed out by a laser printer are not
suitable for further printing.

Note(s) ❏

Loading Envelopes

• Insert the envelopes into the paper support. You can load up to 5
envelopes. Place the envelopes with the non-printed side facing
forward in the paper support.

CAUTION C

• DO NOT reverse the direction when loading envelopes.

Child Safety

• DO NOT pull out the paper support swiftly, otherwise the tray
may fall resulting in injury.

5 Make sure the inserted paper format and paper type matches the

printer settings.

Refer to “Print settings” on page 27.

»

English

26

Print settings

•

•

•

Confirming Printing Preferences for Windows®

Note(s) ❏

Microsoft® Windows® Screenshots

• The screen shots in this guide were made with Windows® 10. If you
use Windows® OS other than Windows® 10, the screen interfaces
look slightly different. The functions, however, are the same.

Edit print settings

When you print a document, the [Print] dialog box appears.
Select [KODAK VERITE 55 PLUS] (this unit) and click on [Properties] or
[Preferences] and such. The changes to the settings only apply to a print
job of the respective application and only until this application is closed.

Select default print setting on the Quick menu

You can adjust the default print settings using the [Quick] menu. Click
on [Start] > [Settings] > [Devices] > [Devices and printers].
Right click on the name of the unit and select [Printer properties]. Click
on [Preferences...] in the [General] tab.

Note(s) ❏

[Devices and printers] on Windows® OS other than Windows® 10

• Right-click at the bottom left corner on your desktop, click [Control Panel],
[Hardware and Sound] and [Devices and Printers] (Windows® 8)

• From the Windows® start menu, click [Devices and Printers]
(Windows® 7).

• From the Windows® start menu, click [Control Panel] > [Hardware
and Sound] > [Printers] (Windows® Vista).

Change to ECO Mode:

You can easily use less Ink.

[ ]
[

 ]

[

 ]

• For more details, refer to "ECO mode" on page 20.

Copies:

Enter the number of copies you would like to print. Activate [Collate],
if you would like to print the copies sorted and not have all the copies
of one page behind each other in succession. Activate [Reverse page
order], if you would like to change the print order to print the last
page of your document first.

P

aper size:

Select the format of the document.

• Letter (8 1/2 x 11 in)




Letter Borderless

• Legal (8 1/2 x 14 in )

• Executive (7 1/4 x 10 1/2 in)

• Statement (5 1/2 x 8 1/2 in)

• A4 (210 x 297 mm)




A4 Borderless

• JIS B5 (182 x 257 mm)

• A5 (148 x 210 mm)




A5 Borderless

• A6 (105 x 148 mm)




A6 Borderless

Adjusting this setting in the print settings of each application is the best
option as many programs overwrite the settings of the printer driver.

You can also create, edit or delete to manage custom paper size by
selecting [Manage Custom Sizes...].

Select the print settings automatically according to the paper size.]

[

can be selected depend on the paper size.

Color Output:

Select print output from [Color] or [Black and white].

[Color] Color print
[Black and white] Black-and-white print

ECO mode is not effective.
ECO mode is effective for saving 20% ink.
ECO mode is effective for saving 20% ink and

reducing 12% printed area.

• Postcard (4 x 6 in.)




Postcard (4 x 6 in.) Borderless

• Index Card (3 x 5 in.)

• 5x7 in.(2L) (127 x 178 mm)




5x7 in.(2L) Borderless

• 3.5x5 in.(L) (89 x 127mm)




3.5x5 in.(L) Borderless

• Hagaki (100 x 148 mm)




Hagaki Borderless

• Envelope #10 (4 1/8 x 9 1/2 in)

• Envelope DL (110 x 220mm)

• Envelope C5 (162 x 229mm)

Quick

After you have selected one of the default settings you want to change the
selection will be saved when you click [X] to close the [Quick] menu window.

Edit detailed print setting on the Details menu

Click [Details] on the top right corner if you want to change specific
detailed settings.

Paper type:

Select the desired paper type. Ensure that the selected paper size is used.

Print Quality:

Select the Quality settings to match the document type to be printed.
You can select the type of Print Quality [Auto/Draft/Normal/Best].

[Auto (default)] Printing with a quality suitable for the paper

type that is selected.

[Draft] High-speed printing, but low image quality.
[Normal] Standard speed printing and image quality.
[Best] Highest quality image, but printing speed is low.

Sharpen:

Adds sharpness to the image.

[On] Activates Sharpen.
[Off] Deactivates Sharpen.

Collate:

The Collate feature controls the order of printed pages when printing
multiple copies of a document. For example, if you are printing two
copies of a five-page document, then the page order of the collated
output would be 1, 2, 3, 4, 5, 1, 2, 3, 4, 5. The page order of the non­collated output would be 1, 1, 2, 2, 3, 3, 4, 4, 5, 5.

[On] Activates Collate
[Off] Deactivates Collate

English

27

Continued on next page.

Reverse page order:

•

•

[On] Print from the last page.
[Off] Print from the first page.

Page Orientation:

This function allows you to select the direction of printing on a
page. You can set whether to print in Portrait or Landscape format.
Adjusting this setting in the print settings of the application is the
best option as many programs overwrite the settings of the printer
driver.

[Portrait] Portrait indicates vertical orientation, where the

page is taller than it is wide.

[Landscape] Landscape indicates horizontal orientation,

where the page is wider than it is tall.

Resizing Options:

If you would like to resize the printing document, click on [On].
[On] Resizes the printing document to the selected

paper size.

[Off] Does not resize. Keep the document size.

Print on both sides (Duplex):

You can select whether to print on one side only or manually print on
both sides.

[On] Prints manually on both sides.
[Off] Prints on one side.

Watermark:

You can choose a watermark from three modes. (Same watermark on
all pages, a different watermark on first page, or a different watermark
on odd/even pages.) Select a watermark that you would like to add
to your print job.

[Use the same watermark on all pages]

• (None)

• Confidential

• Draft

[First page]

You can choose the same selection above ([(None)] to [Date and
Time]) on the first page.

[Other pages]

You can choose the same selection above ([(None)] to [Date and
Time]) on the other pages.

To add or remove watermark, click on [Edit Watermarks].

• Username.

• Date and Time

Note(s) ❏

When [Print on both sides] is set to On.

• You must manually turn the stack of printed pages over and place
them in the paper support. Before placing the pages with the front
printed sides in the paper support, make sure of the following items to
avoid a paper jam or double-feed:

– All other paper (unused paper) has been removed from the paper support.
– The ink is completely dry.
– The paper is not curled or creased. If it is, flatten the paper.
– Align the corners of the paper.
– A paper jam or double-feed may occur if the paper is in a bad condition

or the printed page is placed incorrectly.

– Maximum number of sheets by paper type:

Plain paper (20 lb.): 30 sheets (60 pages)
Postcard: 15 sheets

Page Layouts:

[Normal] Prints the Normal printing.
[Multiple pages
per side (N-Up)]
[Poster] Prints a document in a larger format. The Poster

[Mirror] Prints a horizontally flipped document

Prints Multiple pages on one side of a paper for
the page layout.

option lets you enlarge a print job to several
times the standard size.

Note(s) ❏

When [Poster] is selected.

• Depending on the poster size that you select, your document is
divided into an equal number of sections, each of which prints
on a full sheet of paper. When all sections have printed, you
can trim the extra white space around each page and join the
individual sheets to create a poster.
Supported size of poster - 2 x 2 (4 pages), 3 x 3 (9 pages), or 4 x
4 (16 pages).

Save Detail changes

Click on [Save] on the [Details] settings in the top left corner to save
the changes to the respective register.

The saved configuration information will be managed by names.
You can type the substitute name for [Custom 1] when [Save Print
Settings] windows appears.

Click on
without saving.

Delete Custom settings

You can delete custom settings by Quick menu. Select the one of the
registered settings, then click [Delete].

[Quick] or [X] to close the [Details] settings window

English

28

Continued on next page.

Confirming Print Settings for Mac

•

•

•

•

Note(s) ❏

Macintosh Screenshots

• The screen shots in this guide were made with the Preview
(Applications) of OS X 10.11. If you use another version of OS
X or another application, the screen interfaces look slightly
different. The functions, however, are the same.

Save changes

1

Click on [Presets] list box, and select [Save Current Settings as
Preset...]. The saved configuration information will be managed by
names.

2 Input name in [Preset Name:] textbox, then select [Preset Available

For:] radio button.

3 Click on [OK] to save and close the window.
4 Select [Cancel] to close window without saving.

Load settings

• You can access the saved settings quickly by selecting a name
from [Show Presets...] in [Presets] list box.

Change Print options

• In the Print Setting menu, select the Print options you want to
change in the red frame below.

Paper Size:

Select the format of the document. Adjusting this setting in the print
settings of each application is the best option as many programs
overwrite the settings of the printer driver. You can also create and
manage custom paper size by selecting [Manage Custom Sizes...].

Orientation:

Choose Portrait or Landscape output.

Edit Print Settings for a print job

When you print a document, follow the Steps below.

1 Open the file you want to print.
2 Select [File] on the menu bar.
3 Select [Print...], then the Printer Setting menu will be displayed.
4 If details are not displayed, select [Show Details] on the bottom

of the Print Menu. You can edit Print Settings when details are
displayed.

Preview

Auto Rotate:

Automatically selects portrait or landscape.

Scale:

Enter the scaling ratio.

Scale to Fit:

Input the scaling ratio of [Print Entire Image] or [Fill Entire Paper]
automatically.

Copies per page(s):

Print multiple copies of the page(s).

English

29

Continued on next page.

•

Layout

•

•

•

•

Pages per Sheet:

Print multiple pages on one sheet.

Layout Direction:

If you print multiple pages on a sheet, select the layout direction.

Border:

Print the border on the sheet.
Reverse page orientation: If you would like to reverse page

orientation, select the checkbox.

Flip horizontally:

If you would like to flip horizontally, select the checkbox.

Cover Page

If necessary, you can print the cover page.

Print Cover Page:

If you would like to print the cover page, select [Before document] or
[After document].

Cover Page Type:

If you would like to print the cover page, select the cover page type.

Quality & Media

Paper Handling

Pages to Print:

If you would like to print odd/even pages only, select [Odd only] or
[Even only].

Page Order:

If you would like to print in reverse order, select [Reverse].

Scale to fit paper size:

If you would like to scale to fit your printer paper, select the checkbox
and select [Destination Paper Size].

Destination Paper Size:

Select the paper size to scale.

Scale down only:

If you don’t want to scale up, select the checkbox.

Print Quality:

Select the Quality settings to match the document type to be
printed. You can select the type of Print Quality [Auto/Draft/
Normal/Best].

[Auto] Printing with a quality suitable for the paper type
that is selected.
[Draft] High-speed printing, but low image quality.
[Normal] Standard speed printing and image quality.
[Best] Highest quality image, but printing speed is low.

Paper Type:

Select the desired Paper Type. Ensure that the selected paper size is
used.

Sharpen:

Activate Sharpen, if you would like to add sharpness to the image.

Advanced Options

Color Output: Select print output from [Color] or [Black and White].

English

30

Continued on next page.

Using Menu display

Making copies

1 From the Control panel, use

to navigate the desired settings, and press

.

2 From the Setting screen, press

to scroll to the setting you would like to
set, and then press

Use

to select among settings,

then press

to confirm the selection.

.

Home

Home

Copy

Copy Setting
Ink Levels
Scan

Copy

e.g.) Copy Setting

Copy Setting

Copies 1

Color Color
Quality Text
Resize 100%

Back Copy

The copy function is available using on the unit.

1 Lift the scanner lid on the unit.
2 Load the original print side down on the scanner glass.

3 Close the scanner lid.
4 Specify the settings as necessary.

Refer to “Copy setting” on page 32 for its settings.

»

5 Press .

6 The unit will start copying.

• To cancel copy, press

Direction of the copy

• Document is being copied as described above, printed copy
comes out as shown below.

.

English

31

Continued on next page.

Copy Setting

•

•

•

•

•

Copies

Set the number of Copies.

1 From the Control panel, navigate to

[Home > Copy Setting > Copies], then
press

.

Copy Setting

Copies 1

Color Color
Quality Text
Resize 100%

Back Copy

Resize

Set the Resize for enlarging or compressing
the copy document.

1 From the Control panel, navigate to

[Home > Copy Setting > Resize], then
press

.

Copy Setting

Copies 1
Color Color
Quality Text

Resize 100%

Back Copy

2 Select the number of Copies [1] to [99].

Use
Copies or
of Copies.

to increase the number of

to decrease the number

3 Press .

Note(s) ❏

• Each time you press at
Step 2 for a few seconds, the number of
Copies will increase or decrease by 10
Copies.

Color

Set the copy Color setting.

1 From the Control panel, navigate to

[Home > Copy Setting > Color], then press

.

2 Press to select the copy Color

setting.

• Color • Black/White

3 Press to confirm.

Copies

Set number of copies.

UP

1

Down

CancelOK Setting

Copy Setting

Copies 1

Color Color

Quality Text
Resize 100%

Back Copy

Color Select

Color

Black/White

CancelOK Setting

2 Press to select the Resize

setting.

• 100% Default

• 130% Letter->Legal

• 104% Executive->Letter

• 97% Letter->A4

Copy Resize

100% Default

130% Letter->Legal
104% Executive->Letter
97% Letter->A4

CancelOK Setting

• 93% A4->Letter

• 85% Letter->Executive

• Custom*

* You can select custom Resize range from 25% to 400%. Press

to select the Resize value. The default value is 100%.

3 Press to confirm.

CAUTION C

• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].

Note(s) ❏

• Each time you press and hold under [Custom] a few
seconds, the Resize value will increase or decrease by 10%.

Paper Size

Set the Paper Size for the copy document.

1 From the Control panel, navigate to

[Home > Copy Setting > Paper Size], then
press

.

Copy Setting

Color Color
Quality Text
Resize 100%

Paper Size Letter

Back Copy

Quality

Set the copy Quality.

1 From the Control panel, navigate to

[Home > Copy Setting > Quality], then
press

.

2 Press to select the copy

Quality.

• Text

• Text/Photo

• Photo

• Draft

3 Press to confirm.

English

Copy Setting

Copies 1
Color Color

Quality Text

Resize 100%

Back Copy

Copy Quality

Text

Text/Photo
Photo
Draft

CancelOK Setting

2 Press to select the Paper Size.

• Letter

• Legal

• JIS B5

• A4

• Executive

• A5

• Statement

• A6

• 3 x 5 in.

• 4 x 6 in.

• 5 x 7 in.

• Hagaki

• 3.5 x 5 in.(L)

• 10 Envelope

• DL Envelope

• C5 Envelope

3 Press to confirm.

32

Copy Paper Size

Letter

Legal
JIS B5
A4

CancelOK Setting

Continued on next page.

•

Paper Type

•

rtrait

e

n

2

4

•

•

Set the Paper Type.

1 From the Control panel, navigate to

[Home > Copy Setting > Paper Type] and
press

.

Copy Setting

Quality Text
Resize 100%
Paper Size Letter

Paper Type Plain

Back Copy

9 Remove the first page from the scanner

glass and place the next page.

10 Press to continue to scan the next

page. Repeat this until you have scanned
all the pages.

Copy Pages per Side

Place next page on

Flatbed Scanner and

press

to continue.

Start

2 Press to select the Paper

Type.

• Plain

• Labels

• Glossy Photo

• Matte Photo

• Envelope

3 Press to confirm.

Pages per Side

You can copy multiple pages on one sheet
by printing smaller images of each page.

1 Lift the scanner lid on the unit.
2 Load the original print side down on the

scanner glass.

3 Close the scanner lid.

4 From the Control panel, navigate to

[Home > Copy Setting > Pages per Side],
then press

.

5 Press to select from the

following printing option.

• One

• 2 in 1 Portrait

• 2 in 1 Landscape

• 4 in 1 Portrait

• 4 in 1 Landscape

Copy Paper Type

Plain

Labels
Envelope
Glossy Photo

CancelOK Setting

Copy Setting

Resize 100%
Paper Size Letter
Paper Type Plain

Pages per Side One

Back Copy

Copy Pages per Side

One

2 in 1 Portrait
2 in 1 Landscape
4 in 1 Portrait

CancelOK Setting

CAUTION C

• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].

Brightness

Set the level of Brightness.

1 From the Control panel, navigate to

[Home > Copy Setting > Brightness], then
press

• Press

.

to adjust the

Paper Size Letter
Paper Type Plain
Pages per Side One

Brightness 3

Back Copy

Brightness of your copy document from
5 levels.

2 Press to confirm the setting.

CancelOKSetting

ID Card Copy

You can copy both sides of a small document
(e.g. ID card, business card) onto one page.

Copy Setting

Brightness

Light

 3

Dark

2 in 1 Portrait 2 in 1 Landscape 4 in 1 Portrait 4 in 1 Landscape

21

Note(s) ❏

• If the document for printing is vertically oriented, select the
Portrait. Otherwise, select the Landscape.

6 Press .
7 Press , to start scanning the first

page.

8 On the Menu display, [Would you like

to include another page?] message will
appear. If you have the next page ready to
scan, press

• If you press
start the copying process with only the
scanned data up to that point.

English

.

here, the unit will

scap

1 La

1

2

12

4

3

2

43

1

Note(s) ❏

• This function is valid only with Letter or
A4 size paper.

1 Load plain Letter or A4 size paper on the

paper support.

2 From the Control panel, navigate to

[Home > Copy Setting > ID Card Copy],
then press

.

Copy Setting

Paper Type Plain
Pages per Side One
Brightness 3

ID Card Copy

Back Copy

3 Lift the scanner lid on the unit.

Copy Pages per Side

Would you like to

include another page?

No

Include

OK

4 Load the front side of the ID card facedown

on the scanner glass in the left rear
placement corner with arrows and then
press

.

33

Continued on next page.

ID Card Copy

Use A4 or Letter

in paper size.

Place ID card in the top

corner and press

Cancel Start

.

5 Load the back side of the ID card facedown

•

on the scanner glass in the left rear
placement corner with arrows and then
press

.

6 Copying process will start.

ID Card Copy

Copy the back side of

the ID Card?

Skip Copy

Note(s) ❏

• In the following cases, copy settings are not saved and the
settings will be reset to default.

– When you return to the [Home] setting by pressing

• If you have changed the Paper Settings in the Setup Menu, the
default value of Paper Settings in the Copy Menu will also be
changed.

Check ink levels

Ink levels

From the Control panel, navigate to
[Home > Ink Levels] and press

.

Copy
Copy Setting

Ink Levels

Scan

Home

.

Copy

Ink Levels

Black Color

Back

English

34

Continued on next page.

Scanner

You can use a variety of scanner functions from your smartphone/tablet
or PC. The "Scanning" application is available if your PC has a Windows®
platform.

The scanner function is also available by using an application called
"Image Capture" bundled as a default for Mac.

Or the mobile App for Android™ and iOS. For information on the mobile
App, refer to “Print using your smartphone/tablet” on page 21.

Note(s) ❏

• You cannot use the scan function directly with this unit.

• Load the original print side down on the scanner glass. Make sure
to align the original print to the left rear corner of the scanner
glass with arrow marks.

File Format:

Select the File Format from below:

• JPEG • PDF

Paper Size:

Select the Paper Size from below:

• Letter

• Executive

• Statement

• A4

• B5 (JIS)

• A5

• A6

• 4 x 6 in. (Postcard/KNG)

Resolution (dpi):

Select the scan Resolution from below:

• 75 dpi

• 100 dpi

• 150 dpi

• 200 dpi

• 3 x 5 in. (Index Card)

• 2L (5 x 7 in.)

• L (3.5 x 5 in.)

• Hagaki

• Envelope #10

• Envelope DL

• Envelope C5

• Entirely

• 300 dpi

• 600 dpi

Note(s) ❏

• Scanning at 2400 dpi or more is available on the “High
Resolution Scanning” application included with the Software.

Color Depth:

Select the scan Color Depth from below:

• Gray • Black and white • Color

• 1200 dpi

• The readable area of the scanner is not equal to the area of the
scanner glass. Therefore, when placing the document in the left
rear corner of the scanner the edges of the document may not be
scanned.

• 0.079 inch (2 mm) missing in the short side, and 0.024 inch (0.6
mm) missing in the long side of the scan area.

Scan in [Scanning] application by Windows®

Run [Scanning] from the [Start] menu as it appears in the window below.

Click [Scan] and will start the scanning.

Settings

If you would like to change the settings, click [Details].

Content Type:

Specify the Content Type of the scan document from below:

• Text • Text/Graphics • Photo

Scan:

Starts Scan.

Brightness:

Select the Brightness level. Adjust the bar toward the left end to set
the reproduction darker. Adjust the bar toward the right end to set
the reproduction lighter. The Brightness level will be reflected on the
scanned data.

Contrast:

Select the Contrast level. Adjust the bar toward the left end to reduce
the Contrast. Adjust the bar toward the right end to increase the
contrast. The Contrast level will be reflected on the scanned data.

Background Removal:

Select Background Removal to remove the background on the
scan data. The Background Removal feature adjusts the amount of
background that is visible on the scanned data.

Save to Folder:

If you would like to change the saving folder for a scanned file to
another folder, click [Save to Folder...].

1 Click on [Save to Folder...], then [Browse For Folder] will

appear.

2 Select the folder you want to save the scanned file to, then click

[OK].

3 The scanned file will save to the selected folder.

· The folder you have chosen is automatically selected from the
next time. Perform Step

file to another folder.

and 2 if you want to save the scanned

1

English

35

Continued on next page.

Scan in Mac

•

•

Run the Image Capture application. (Scanning with other applications
such as “Preview” is a very similar process.)

Simplified scan mode

In the “Simplified” scanner interface, follow these Steps:

1 Place the document you would like to scan on the scanner glass.
2 Open Image Capture located in the Applications folder.
3 Select this unit from list of devices.
4 Select the desired destination where the scanned document is

to be saved from the [Scan To] pop-up menu.

5 Click [Scan] to scan.
6 A preview will appear on your monitor when scanning is

completed.

Advanced scanning options

In the “simplified” scanner interface, click [Show Details] if you want
to enter a detailed scan mode with more advanced options.

Kind:

Select the scan color depth from below:

• Color • Black & White • Text

– Choose “Color” to scan an object in Color.
– Choose “Black & White” to scan an object in Grayscale (256 or

Thousands of grays).

– Choose “Text” to scan text documents.

Resolution:

Select the scan Resolution from below:

• 75 dpi

• 100 dpi

– Select the [Use Custom Size] checkbox to enable the [Size]

fields to specify the width and height you want to scan. Select
pixels, inches or cm (centimeters).

English

• 150 dpi

• 200 dpi

• 300 dpi

• 600 dpi

• 1200 dpi

Rotation Angle:

Set the number of degrees for the clockwise rotation of your scanned
image.

Auto Selection:

Choose one of the following from the [Auto selection] pop-up menu.

[Off] – to normally select the object.
[Detect Separate Items] – to automatically select and

straighten the objects you are
scanning.

[Detect Enclosing Box] – to include all the items on the

scanner bed in one image.

Scan To:

Select the desired destination where the scanned document is to be
saved.

Name:

Enter the name of scanned images. For multiple scans, the name
entered will be a part of incrementally named scans. For example,
enter “doc”, and the names of the scanned images will be “doc1.jpeg”,
“doc2.jpeg”, and so forth.

Format:

Select the image format of the scan from below:

• JPEG

• PDF

• BMP

Image Correction:

When [Manual] is selected, the adjustment of the following
parameters are possible.

36

• PNG

• TIFF

Continued on next page.

Document Type:

Select the type of document to be scanned from below:

• Text Only • Photo • Mixed Graphics

When choosing [Color] in [Kind:]

[Brightness] – to adjust the balance between light and dark.
[Tint] – to adjust the color balance between red and

green.

[Temperature] – to adjust the color balance of warm and cool.
[Saturation] – to adjust the vividness of colors.

When choosing [Black & White] in [Kind:]

[Brightness] – to adjust the balance between light and dark.
[Contrast] – to adjust the balance of sharpness and

softness.

When choosing [Text] in [Kind:]

– [Threshold] to adjust the transition point between dark and light.

Note(s) ❏

• Those images are created based on the screen of OS X 10.11.
If the version of the OS is different or the OS is updated, it is
possible that the display on the screen has changed.

English

37

Settings

•

•

Please Finish the step 3 of 5

You can setup the unit as you like depending on your needs.

Maintenance

You can perform maintenance operations for the ink cartridge.

Clean Printhead

1

From the Control panel, navigate to
[Home > Setup > Maintenance], then press

.

2 Press to select [Clean

Printhead], then press

3 Load plain Letter or A4 -size paper.

.

Maintenance

Clean Printhead

Cartridge Setup

BackOK Select

4 The unit will start printing the alignment

pattern.

• The
blink rapidly. LED lighting pattern is
“Blinking 5”.

Refer to “Meaning of LED behavior and lights”

»

on page 9.

(Power) LED will light up then

Cartridge Setup

Step 2 of 5 :

Test Print

4 Press to start cleaning the printhead.

5 A page prints, forcing ink through the ink

cartridge nozzles to clean them.

6 Print the document again to verify that the

print quality has improved.

Cartridge Setup

Print the alignment pattern for alignment
adjustment. By reading the pattern with the
scanner, the printer alignment is optimized
and the print quality will be better.

1 From the Control panel, navigate to

[Home > Setup > Maintenance], then press

.

2 Press to select [Cartridge

Setup], then press

.

3 [Cartridge Setup] screen will be displayed

on the Menu display. Make sure plain Letter
or A4 -size paper is loaded in the paper

support, then press

.

Clean Printhead

Press

OK

to clean Printhead.

CancelOK Start

Clean Printhead

Cleaning...

Maintenance

Clean Printhead

Cartridge Setup

BackOK Select

Cartridge Setup

Step 1 of 5 :

For best results,

please proceed with

cartridges setup.

SkipOK Next

5 Open the scanner lid on the unit. Load the

front side of the alignment pattern result
facedown at the placement corner of the
scanner glass (see below), then press

to start the alignment adjustment

after closing the scanner lid.

Please Finish the step 3 of 5

6 The unit will start scanning the alignment

pattern to set an appropriate alignment on
this unit.

7 When alignment is completed, [Alignment

successful.] message will be displayed on
the Menu display, then press

.

Cartridge Setup

Step 3 of 5 :

Place test print on

the upper left corner

of scanner. Press

BackOK Scan

Cartridge Setup

Step 4 of 5 :

Test Scan

Cartridge Setup

Step 5 of 5 :

Alignment successful.

OK

Press

OK

.

.

OK

English

38

Continued on next page.

Paper Setup

•

•

•

•

•

Sets the paper type and paper size.

Note(s) ❏

• If you change the following Paper Settings, the default paper
setting values in the Copy Menu will also be changed.

• This setting will also affect the AirPrint paper size setting.

Paper Size

Set the Paper Size for the copy document.

1 From the Control panel, navigate to

[Home > Setup > Paper Setup > Paper
Size], then press

.

Paper Setup

Paper Size Letter

Paper Type Plain

BackOK Select

Network Status

You can check the following settings for the Network/router
connection status.

Connection

1

From the Control panel, navigate to [Home
> Setup > Network Status > Connection],
then press

.

2 The Wireless Connection status is

displayed. [Connected] or [Disconnected]
will be shown on the screen.

Connection

Signal Quality
Security
IP Address

BackOK Select

Network Status

Connection

Connected

2 Press to select the Paper Size.

• Letter

• Legal

• JIS B5

• A4

• Executive

• A5

• Statement

• A6

• 3 x 5 in.

• 4 x 6 in.

• 5 x 7 in.

• Hagaki

• 3.5 x 5 in.(L)

• 10 Envelope

• DL Envelope

• C5 Envelope

3 Press to confirm.

Paper Type

1

From the Control panel, navigate to
[Home > Setup > Paper Setup > Paper
Type], then press

.

2 Press to select the Paper Type.

• Plain

• Labels

• Envelope

• Glossy Photo

• Matte Photo

3 Press to confirm.

Paper Size

Letter

Legal
JIS B5
A4

CancelOK Setting

Paper Setup

Paper Size Letter

Paper Type Plain

BackOK Select

Paper Type

Plain

Labels
Envelope
Glossy Photo

CancelOK Setting

Signal Quality

1

From the Control panel, navigate to [Home
> Setup > Network Status > Signal Quality],
then press

.

2 The Wireless signal quality is displayed.

[No Signal] or 8 levels of signal will be
shown on the screen.

Back

Network Status

Connection

Signal Quality

Security
IP Address

BackOK Select

Signal Quality

Signal Level

Infrastructure

Low High

BackOK Refresh

English

Security

1

From the Control panel, navigate to [Home
> Setup > Network Status > Security], then
press

.

39

Network Status

Connection
Signal Quality

Security

IP Address

BackOK Select

Continued on next page.

2

•

•

•

The Wireless security type is displayed.
[Open], [WEP-64], [WEP-128], [WPA/
WPA2-PSK] or [WPA2-PSK] will be shown
on the Menu display.

IP Address

1

From the Control panel, navigate to [Home
> Setup > Network Status > IP Address],
then press

.

2 The IP address is displayed on the screen.

– The

XXX.XXX.XXX.XXX

IP address of your unit.

represents the

Security

WPA2-PSK

Back

Network Status

Connection
Signal Quality
Security

IP Address

BackOK Select

IP Address

XXX.XXX.XXX.XXX

Back

Wi-Fi Setup

You can set the following Wi-Fi settings.

Network and Password

If you would like to connect to a router
manually, follow the Steps below.

1 From the Control panel, navigate to [Home

> Setup > Wi-Fi Setup > Network and
Password], then press

2 Press Select the SSID that you

would like to connect, then press

• If it is not displayed the SSID that you
would like to connect in the list, select
[Other] then press
name, then select the security type of the
SSID.

Refer to “Manual SSID Setting” on page

»

41.

3 Enter Password. Press to

select letters, numbers and symbols, then
press

– When you enter a wrong text character,

then you can erase it by pressing

.

.

.

. Enter the SSID

.

Wi-Fi Setup

Network and Password

Wi-Fi Protected Setup
IP Address
Proxy

BackOK Select

Network and Password

Router1

Router2
Router3
Router4

BackOK Select

Network and Password

Enter Password

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1/+

< > Done

MAC Address

1

From the Control panel, navigate to [Home
> Setup > Network Status > MAC Address],
then press

.

2 The MAC address is displayed on the

screen.

– The

XX-XX-XX-XX-XX-XX

the MAC address of your unit.

represents

Network Status

Signal Quality
Security
IP Address

MAC Address

BackOK Select

MAC Address

XX-XX-XX-XX-XX-XX

Back

– To change the characters, press

to select [

a/A/1/+

], then press

repeatedly until the character you

want to enter.

4 After entering the Password, press

to select [Done], then press

.

5 Confirm the SSID name and Password

displayed on the Menu display, then press

. The unit will start connecting to the

router.

6 [Connected to...] message will appear on

the Menu display when the connection
is successful. Press
connection setting is completed.

, then the

Network and Password

XXXXXXXXXXXXX

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1/+

<>

Network and Password

SSID: XXXXXXX
Password:
XXXXXXXXXXXXX

BackOK Continue

Network and Password

Press

Press OK to continue.

PrintOK Continue

Connected to

Router1

to print report.

Done

English

40

Continued on next page.

Manual SSID Setting

•

•

1 Enter SSID name of your router.

Press
numbers and symbols, then press

– When you enter a wrong text character,

then you can erase it by pressing

– To change the characters, press

to select [
repeatedly until the character you

want to enter.

to select letters,

a/A/1/+

], then press

2 After entering the SSID name, press

to select [Done], then press

.

.

.

Network and Password

Enter SSID

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1/+

< > Done

Network and Password

*****************

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1/+

<>

Done

IP Address

1

From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > IP Address], then
press

.

2 Press to select [Auto] or

[Manual], then press

[Auto] DHCP mode

It's easy to Automatically get the IP address
of this unit from the Network.

[Manual] Static mode

Set the Network address manually.

.

Wi-Fi Setup

Network and Password
Wi-Fi Protected Setup

IP Address

Proxy

BackOK Select

IP Address

Auto

Manual

BackOK Select

– Press to select the security

type of SSID, then press

.

Note(s) ❏

• When you enter the same SSID name
manually that you previously used
on this unit, the security type is set
automatically.

Wi-Fi Protected Setup

1

From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Wi-Fi Protected
Setup], then press

.

2 Press WPS button on the router.

Network and Password

Open

WEP-64
WEP-128
WPA/WPA2-PSK

BackOK Select

Wi-Fi Setup

Network and Password

Wi-Fi Protected Setup

IP Address
Proxy

BackOK Select

Wi-Fi Protected Setup

Push WPS button

on Wi-Fi router.

120

Cancel

3 If you select [Manual], set the items below.

• IP Address

• Subnet Mask

– Press

Address], [Subnet Mask], [Gateway] or
[DNS], then press

– Set digits one at a time. Press

to select from [0] to [9], then
press

– When you enter a wrong number, then

you can correct it by pressing

– After you select the last digit, then press

to set IP Address and return to

the previous screen.

• Default Gateway

• DNS

to select [IP

.

.

.

IP Address

IP Address

Subnet Mask
Gateway
DNS

BackOK Select

(e.g.) [IP Address]
screen

IP Address

192 . 168 . 011 . 012

BackOK Select

3 [Connected to XXXXXXXX] appears on

the Menu display, WPS (Wi-Fi Protected
Setup) is completed.

– The

XXXXXXXX

represents the SSID of

your router.

4 Press on [Wi-Fi Setup] screen.

English

Wi-Fi Protected Setup

Connected to
XXXXXXXX

Next

OK

41

Continued on next page.

•

Proxy

•

1

From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Proxy], then press

.

Wi-Fi Setup

Network and Password
Wi-Fi Protected Setup
IP Address

Proxy

BackOK Select

Host Name

1

From the Control panel, navigate to [Home
> Setup > Wi-Fi Setup > Host Name], then
press

.

Wi-Fi Setup

Wi-Fi Protected Setup
IP Address
Proxy

Host Name

BackOK Select

2 Proxy has 3 setup items.

Press
[Address] or [Port], then press

Proxy

Press
then press

Address

Enter proxy address. Press
select letters, numbers and symbols, then
press

– When you enter a wrong letter, then you

can erase it by pressing

– After entering the proxy address, press

press

to select [Proxy]

to select [On] or [Off],

.

.

to select [Done], then

.

Proxy

.

Proxy Off

Address
Port

BackOK Select

Proxy

On

Off

If you would like to change it, press

3 Enter Host Name. Press to

select letters, numbers and symbols, then
press

.

.

– Current Host Name is displayed.

BackOK Select

– When you enter a wrong text character,

then you can erase it by pressing

.

– To change the characters, press

to select [

a/A/1/+

], then press

repeatedly until the character you

want to enter.

4 After entering the Host Name, press

to select [Done], then press .

to

Proxy

Enter Proxy Address

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1/+

<>Done

.

Host Name

HostName-123ABC

BackOK Change

Host Name

HostName-123ABC

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1

<>Done

Host Name

HostName-123ABC

a bcdef gh ij

klmnopqrst

u v w x y z a/A/1

<>

Done

2 The Host Name is displayed on the screen.

– To change the characters, press

to select [

a/A/1/+

], then press

repeatedly until the character you

want to enter.

Port

Press
number, then press

to select a proxy port

.

– You can enter numbers only.
– When you enter a wrong number, then

you can erase it by pressing

– After entering the proxy port, press

to select [Done], then

press

.

English

Proxy

Enter Proxy Port

1 234567890

<>Done

.

42

Continued on next page.

Enable Wi-Fi

•

•

•

•

Enable or disable the Wireless Network for this unit.

1 From the Control panel, navigate to

[Home > Setup > Enable Wi-Fi], then press

.

2 Press the to select [Enable] or

[Disable].

3 Press to confirm.

Setup

Paper Setup
Network Status
Wi-Fi Setup

Enable Wi-Fi

BackOK Select

Enable Wi-Fi

Enable

Disable

CancelOK Select

Sleep

1

From the Control panel, navigate to [Home
Menu > Setup > Device Setup > Sleep],
then press

.

2 Select Sleep Time (Time before the unit

goes into Sleep mode) from [1] minute to
[120] minutes. Use
Sleep Time or

to increase the

to decrease the Sleep

Time.

3 Press to confirm.

Usage Tracking

1

From the Control panel, navigate to [Home
> Setup > Device Setup > Usage Tracking],
then press

.

Device Setup

Language English

Sleep 10min

Usage Tracking
Software Version

BackOK Select

Sleep

Set Sleep Time

UP

10

Down

CancelOK Setting

Device Setup

Language English
Sleep 10min

Usage Tracking

Software Version

BackOK Select

Device Setup

You can set the following unit settings.

Language

1

From the Control panel, navigate to [Home
> Setup > Device Setup > Language], then
press

2 Press the to select the desired

language from [English], [Español], or
[Français], then press

3 Press to confirm. If you would like to

change the chosen language, press
to return to the [Device Setup] screen.

.

.

Device Setup

Language English

Sleep 10min
Usage Tracking
Software Version

BackOK Select

Language Select

English

Español
Français

CancelOK Select

Language Select

You have chosen

English as

the language

for your printer.

Cancel

2 Press the to select [Don't

allow] or [Allow].

3 Press to confirm.

Software Version

1

From the Control panel, navigate to
[Home > Setup > Device Setup > Software
Version], then press

.

2 Press .

OK

Usage Tracking

Periodically send the

info of your printer.

Language English
Sleep 10min
Usage Tracking

Software Version

BackOK Select

Software Version

Don't allow

OK

Device Setup

*.**.***

Allow

Select

English

43

Back

Continued on next page.

Direct Connect Time

•

The setting of the Disconnect time when no Direct Mode operation is
detected.

1 From the Control panel, navigate to

[Home > Setup > Direct Connect Time],
then press

.

Setup

Wi-Fi Setup
Enable Wi-Fi
Device Setup

Direct Connect Time

BackOK Select

Google Cloud Print™

You can set the Google Cloud Print™ settings.

Status

Display the connection status or registration
status of the Google Cloud Print™ service.

1 From the Control panel, navigate to [Home

> Setup > Google Cloud Print > Status],
then press

.

Google Cloud Print

Status

Register
Enable/Disable

CancelOK Select

2 Press to select Direct

Connect Time among the selection from
[Disconnect], [5 min], [10 min], [60 min]
and [Unlimited].

3 Press to confirm.

– If you select [Unlimited], when the

mobile is connected by Direct Mode until
selecting [Disconnect] this unit remains in
the Direct Mode.

– If you select [Disconnect], the Direct

Connection will be immediately
terminated.

AirPrint

Enable or disable the AirPrint function.

1 From the Control panel, navigate to

[Home > Setup > AirPrint], then press

.

2 Press to set [Enable] or

[Disable].

3 Press to confirm.

Direct Connect Time

Disconnect

5 min

10 min
60 min

CancelOK Select

Setup

Enable Wi-Fi
Device Setup
Direct Connect Time

AirPrint

BackOK Select

AirPrint

Enable

Disable

CancelOK Select

2 The Google Cloud Print™ connection (or

registration) status, unit name, and unit
description will be shown on the Menu
display.

– The

Verite55Plus-XXXX

represents the

system name of your unit.

Google Cloud Print

Status

Not configured

Verite55Plus-XXXX

Back

3 Press to return to the previous menu.

The following table shows the Google Cloud Print™ service registration
and connection status of this unit.

Status Unit state

Not configured Unit is not registered to the Google Cloud

Disabled The Google Cloud Print™ service has been

Not connected Unit is not connected to use the Google Cloud

Connected Unit is connected from the Google Cloud

Disconnected

Registration in
progress

Print™ service.
The Google Cloud Print™ feature is not
available.

disabled.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)

Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)

Print™ service.
The Google Cloud Print™ feature is available.
(Unit is registered in the Google Cloud Print™
service.)

Unit has been disconnected to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)

Registration is in process to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not
available.
Registration should complete, please wait.

English

44

Continued on next page.

•

Register to Google Cloud Print™

•

1

From the Control panel, navigate to [Home
> Setup > Google Cloud Print > Register],
then press

.

Google Cloud Print

Status

Register

Enable/Disable

CancelOK Select

Enable/Disable to Google Cloud Print™

1

From the Control panel, navigate to [Home
> Setup > Google Cloud Print > Enable/
Disable], then press

.

Google Cloud Print

Status
Register

Enable/Disable

CancelOK Select

2 Registration will start and [Registering

printer with Google] message will be
displayed on the screen. The unit will print
a registration URL for the Google Cloud
Print™ registration.

Note(s) ❏

• Load plain Letter or A4 -size paper.

3 Use your smartphone/tablet or PC to

access that registration URL within 14
minutes and follow its instructions.

GCP Registration

Registering printer

with Google.

Back

Registration

URL

GCP Registration

Registration in progress

Waiting for

access to URL

Cancel

2 Press to set [Enable] or

[Disable].

3 Press to confirm.

GCP Enable/Disable

Enable

Disable

CancelOK Select

The following table shows actions available in the Google Cloud Print™
action.

Select Action

Action

Register Register to Google Cloud Print™
Unregister Unregister from Google Cloud Print™
Enable Enable Google Cloud Print™
Disable Disable Google Cloud Print™

Print Reports

Print out the configuration information.

1 From the Control panel, navigate to

[Home > Setup > Print Reports], then press

.

2 Load plain Letter or A4 -size paper.

Setup

Direct Connect Time
AirPrint
Google Cloud Print

Print Reports

BackOK Select

4 The mail address you registered will appear

on the Menu display, Register of Google
Cloud Print™ is completed.

5 Press to [Google Cloud Print]

screen.

Note(s) ❏

• Make sure you access the registration
URL within 14 minutes at Step 3. The
registration URL will be unavailable after
15 minutes.

• To cancel the registration process from
the unit, press

English

.

GCP Registration

Cloud Printer

Mail address

[e-mail]

Verite55Plus-XXXX

3 Press to start printing the configuration

report.

OK

Print Reports

OK

Press

to print.

CancelOK Select

Configuration

Report

45

Continued on next page.

Restore Factory Default

All of the unit settings will be reset to the factory default.

1 From the Control panel, navigate to

[Home > Setup > Restore Factory Default],
then press

.

2 Press .

3 Press .

• If you choose [Yes], all settings will be
restored to factory defaults and the unit
will restart.
If you choose [No], the display will return
to [Setup] screen.

Setup

AirPrint
Google Cloud Print
Print Reports

Restore Factory Defau

BackOK Select

Restore Factory Default

Erase ALL content

and settings,

and restore

factory defaults?

CancelOK Restore

Restore Factory Default

Are you sure you want

to restore to default?

OK

Select

Yes

No

English

46

Web interface

The Web interface is available to you on all operating systems.
You can access the web interface with an Internet browser on your
PC and conduct many different settings to your unit.

You can access the Web interface if the unit is connected to a
Network via Wireless Connection.

Note(s) ❏

• Before you start, make sure your PC and the unit are connected
to the SAME NETWORK.

• When the unit is connected to the Network, the 
(Wireless) LED lights up.

Calling the Web interface

For the first time use, you will need to set the Password to get
the entire features on the Web interface. After you have set the
Password, you do not need to set the Password anymore.

1 Start an Internet browser on a PC, which is connected to the

Network.

Note(s) ❏

Suitable Internet browser

• We recommend the following Internet browser.

– Windows®: Internet Explorer® (version 8.0 or above)
– Mac: Safari (version 1.3 or above)

Confirming the IP Address

You will need the current IP address of the unit in order to access the
Web interface. To confirm the IP address of the unit, you can check
by selecting [Setup > Network Status > IP Address] on the Control
panel.

Refer to “IP Address” on page 40.

»

Alternatively, you can also verify the IP address by printing out the
Configuration Report.

Refer to “Print Reports” on page 45.

»

Configuration Report

Device Information

Model Name KODAK VERITE 55 PLUS
Serial Number XXXXXXXXXXXXXXXX
Software Version X.XX.XXX (XXXXXXXX)

Device Statistics Information

Printed Page 44
Scanned Page 65

Supply Information

Black Cartridge

Cartridge Status Installed
Cartridge Type XXL
Ink Level 43%

Color Cartridge

Cartridge Status Installed
Cartridge Type XXL
Ink Level 75 %

Device Configuration

Language English
Default Paper Size Letter
Default Paper Type Plain
Sleep Time-out 10 min
EWS Access path http://xxx.xxx.xxx.xxx

Network Information

㸸
㸸

EWS Access path

[2016-07-04 07:42:39(UTC)]

http://xxx.xxx.xxx.xxx

2 Enter the IP address of the unit into the address bar of the browser.

http://xxx.xxx.xxx.xxx

Unit’s IP address

3 The following screen will be displayed.

English

Unit’s IP address

47

Click on the item to check the information or change
its settings.

The printer’s status is displayed here.
[Ready / Busy / Status message]
More details on Status messages and how to correct
problems can be found under "Status messages, LCD
messages and LED behaviors".

Refer to "Status messages, LCD messages and LED

»

behaviors" on page 59.

Changes the display language.
After selecting the languag

e, click on [Accept].
Input "admin" into the "Password" field, then click on [Login]
then, create the Password as you like.

Refer to "Login Password" on page 50.

»

Continued on next page.

Device Status

•

•

•

•

•

•

You can check the status of the unit, such as remaining ink level.

Device Configuration

General Settings

You can change the following items.

• Default paper size/type
If you change this setting, the default paper size/type in Copy
Menu setting are also changed.

• Sleep mode time
You can change the time required before unit enters Sleep mode
from [1 min/10 min/20 min/30 min/40 min/50 min/60 min/70
min/80 min/90 min/100 min/110 min/120 min].

Print Reports

You can print out the configuration report.

Factory Reset

You can restore the default settings to the unit.

Note(s) ❏

• The unit will automatically restart after reset to factory settings.
(The Web Interface will be disconnected.)

Enable Wi-Fi

You can turn On / Off the Wireless function.

Note(s) ❏

• Even if the Wireless function is set to Off, when you connect by
Easy Simple Print, the Wireless function will be valid.

• When you have connected the unit to the access point/router, if
you set to disable Wi-Fi, you will not be able to operate from the
Web Interface. If you connect to Wi-Fi again, select the “Enable”
from the “Enable Wi-Fi” of unit menu.

Refer to “Enable Wi-Fi” on page 43.

»

TCP/IP (IPv4) Settings

Network

If necessary, you can confirm or set the state of the Network. If you
are not familiar with Network management, use the default settings.

Note(s) ❏

• Be careful if you want to assign the IP address manually. If the
IP address you entered is not correct, you will not be able to
connect to the unit. When you cannot connect to the unit after a
configuration change, please reset the unit.

Refer to “Restore Factory Default” on page 46.

»

• When the connection of the unit is changed, the Web interface
will be disconnected. If necessary, reconnect the Web interface.

English

You can change the IP source / IP address or the like.

Note(s) ❏

• The initial value of the IP Source of Wireless is DHCP.

IPv6 Settings

This unit supports IPv6 in order to support AirPrint.
You can check the information on IPv6.

48

Continued on next page.

•

Wireless LAN Settings

•

•

•

• You can change connection settings by setting the SSID / Security /
Password for Wireless Connection.

Proxy Settings

Google Cloud Print™

You can set the Google Cloud Print™ settings.

• Registration and connection status of Google Cloud Print™ will
be shown. More information can be found under "Google Cloud
Print™".

Refer to “Google Cloud Print™” on page 44 for more information.

»

• The printer name and its information are displayed when you are
using Google Cloud Print™.

Action

You can set the following for the Google Cloud Print™ setting.
After you select the Action, click on [Accept].

• You can connect to Internet through a proxy server.

Mobile

AirPrint

You can set the AirPrint Settings.

Refer to “AirPrint” on page 23 for more information.

»

Note(s) ❏

• When you select [Certificate Installation] or [Certificate Request
Generate], you can set the encrypted communication.

AirPrint Configuration

You can turn On/Off the AirPrint function. If set to On, you can print
using the AirPrint.

Select Action

Register to Google Cloud
Print

Disable Cloud Print Disable Google Cloud Print™
Suspend Cloud Print Suspend Google Cloud Print™
Enable Cloud Print Enable Google Cloud Print™
Resume Cloud Print Resume Google Cloud Print™
Unregister from Google Unregister from the Google Cloud Print™
Register Cancel Cancel the Google Cloud Print™

Set XMPP Ping Interval Set the interval time to communicate

*Usually, set the XMPP ping interval to 5 minutes (default).
To change this setting, select [Set XMPP Ping Interval] in [Select Action]

and choose the communication interval from 1 minute to 10 minutes.

Note(s) ❏

• When you select [Register to Google Cloud Print], then ensure
plain Letter or A4-size paper is loaded.

Register to Google Cloud Print™

registration

with the Google Cloud Print™ service.

Action

Order Supplies

If you would like to purchase consumable material, visit the following
website at www.kodakverite.com

• The printer name (Friendly Name) and its information are
displayed when you are using AirPrint.

English

49

Continued on next page.

Software Update

• If the Software Update for this unit is available, the Update
button is displayed. Press it and start to update the Software.

• When the Software is the latest version, the Update button is not
displayed.

Login Password

• Once you have logged in to the Web interface with "admin", it is
recommended that you change the Password.

Note(s) ❏

• Record the Password in case you forget it.

• If you have forgotten the Password, you can perform [Restore
Factory Default] to reset all settings, including the Password, to
their factory default. After resetting the unit, you can login with
the default Password "admin".

• Passwords may only contain alphanumeric characters, and are
from 1 to 32 characters in length.

• The default Password "admin" provides you with full access to
all setup functions, but can allow access by an unauthorized third
party. It is recommended that you change the Password.

English

50

Service

2

XL

1

XL

3 Remove the cartridges.

Note(s) ❏

• If any problems occur, please see the notifications on the Status
Messenger (Windows®).

Refer to “Status Messenger for Windows®” on page 24.

»

Checking ink levels

Using the Control panel

• From the Control panel, press
press

Using PC

Refer to “Status Messenger for Windows®” on page 24.

»

.

until [Ink Levels], then

Changing the ink cartridge

CAUTION C

Use Original Consumable Materials!

• Use only original consumable materials. These are available
from a specialized retailer or through our order service. Other
consumable materials can cause damage to the unit.

Observe P

ackaging Instructions

• Follow the instructions on the packaging of the consumable
materials.

Black

e

e

e

d

d

d

i

i

i

l

l

l

S

S

S

4 Remove the Black and Color Ink cartridges from the packaging.

5

BLACK

■■

L

5 Remove the plastic tape on the Black and Color Ink cartridges using

the red pull tab.

DO NOT TOUCH

Color

S

S

S

ColorBlack

l

l

l

COLOR

i

i

i

5

d

d

d

■■

L

e

e

e

1 Open the unit by lifting the Ink door.

DO NOT Open During a Print Job!

• Never open the Ink door while printing.

1

2

2 Press the Cartridge tab to open the Cartridge slot.

• DO NOT TOUCH the gold contact area on the back or the
metal nozzles on the bottom of the Cartridge.

6 Set the Color Ink cartridge all the way into the slot on the right side.

Color

Black

(Right)

(Left)

S

S

S

e

e

e

d

d

d

i

i

i

l

l

l

1

2

e

e

S

S

S

e

d

d

d

i

i

i

l

l

l

s

s

s

s

e

e

!

!

r

r

P

P

7 Set the Black Ink cartridge all the way into the slot on the left side.

English

51

Continued on next page.

8

•

•

Push and click the Cartridge tab to close the slot until the cover
snaps securely into position.

C

C

l

l

i

i

c

c

k

k

!

!

9 Close the Ink door.

Ordering supplies

If you would like to purchase consumable material, visit the following
website at www.kodakverite.com/support

Ordering ink cartridges

Item Part Name

BLACK

Verité 5

Black Cartridge

Verité 5

Color Cartridge

Verité 5

Combo Cartridge

Note(s) ❏

XL BLACK
XXL BLACK
3XL BLACK
COLOR
XL COLOR
XXL COLOR
3XL COLOR
XL BLACK & COLOR
3XL BLACK & COLOR

CAUTION C

Ink Cartridge Not Inserted Correctly!

• If the Ink door does not close properly, the Ink cartridges are
not inserted correctly. Remove the Ink cartridges and then
insert them again correctly.

Green

DO NOT PUSH the green/blue
parts at the same time.

Blue

• For page yield information, visit www.kodakverite.com/support

• The cartridges used for printing documents can also be used for
printing photos.

• For best results, use only genuine KODAK VERITÉ Ink Cartridges.

Using genuine K

KODAK VERITÉ Ink Cartridges are designed to perform for superior
print quality, and our inks are formulated to work with the unit and
help extend the life of your product.

We recommend that you use only genuine KODAK VERITÉ Ink
Cartridges sold by Funai Corporation, Inc.

Funai’s warranty does not cover damage caused by non-KODAK
VERITÉ Ink or Ink Cartridges.

ODAK VERITÉ Ink Cartridges

Fixing a paper jam

Clearing paper jam in the unit

Note(s) ❏

• The Parts inside the unit are Sensitive. Avoid unnecessarily
touching Parts while Clearing Jams.

1 Check the paper support or the paper exit tray for jammed paper.
2 Firmly grasp the paper, and then gently pull it out.

English

Note(s) ❏

• Be careful not to tear the paper while removing it.

3 Press to cancel the rest of the print job.

52

Continued on next page.

Restoring the factory settings

•

You can restore the default settings on the unit using the web
interface or Control panel.

Refer to “Restore Factory Default” on page 46.

»

Power cycling

Refer to “Troubleshooting” on page 55.

»

If a problem occurs that cannot be corrected with the instructions in
“Troubleshooting”, follow the Steps given here.

1 Pull out the AC plug.
2 Wait at least 30 seconds, then connect the AC plug back into the

AC outlet.

3 Follow the instructions on the display and in the error report. If the

problem repeats, visit the following website at www.kodakverite.

com/support

Cleaning the printhead nozzles

Using the Control panel

1

From the Control panel, press until [Setup], then press

.

2 Press to select [Maintenance], then press .
3 Press to select [Clean Printhead], then press .
4 Load plain Letter or A4 -size paper.

5 Press to start cleaning the printhead.
6 A page prints, forcing ink through the ink cartridge nozzles to clean

them (this will use up some of your Ink from the Cartridges).

7 Print the document again to verify that the print quality has

improved.

Cleaning the ink cartridge nozzles and contacts

1 Remove the ink cartridge(s).
2 Dampen a clean, lint-free soft cloth with water, and then place the

cloth on a flat surface.

3 Gently hold the nozzles against the cloth for about 3 seconds, and

then wipe in the direction shown.

e.g.) Verité 5 Color CartridgeXL COLOR

4 Using another clean section of the cloth, gently hold the cloth

against the contacts for about 3 seconds, and then wipe in the
direction shown.

e.g.) Verité 5 Color CartridgeXL COLOR

5 With another clean section of the cloth, repeat Step 3 and Step 4,

and then let the nozzles and contacts dry completely.

6 Reinsert the ink cartridge(s), and then print the document again.
7 If the print quality does not improve, clean the print nozzles, and

then try printing the document again.

8 Repeat Step 7 up to two more times.
9 If print quality is still not satisfactory, replace the ink cartridge(s).

English

53

Continued on next page.

Preserving the ink cartridges

Cleaning the exterior of the unit

• Keep new ink cartridges in their packaging until you are ready to
install them.

• DO NOT remove an ink cartridge from the unit except to replace,
clean, or store it in an airtight container. The cartridges do not
print correctly if left exposed for an extended period of time.

CAUTION C

Refilling ink cartridges

• The warranty does not cover repair of failures or damage
caused by a refilled ink cartridge.

• KODAK does not recommend use of a refilled ink cartridge.
Refilling an ink cartridge can affect print quality and may

•
cause damage to the unit.

• For the best results, use KODAK Supplies.

Warning - Drying out of the Printheads:

• DO NOT move the Ink Cartridge Holder by hand.
If you move the Cartridge Holder to the left the printhead
Cover Caps will not protect the Printheads from Drying out.

Cleaning the scanner glass

1 Dampen a clean, lint-free soft cloth with water.
2 Gently wipe the scanner glass clean.
3 Use a dry lint-free soft cloth to wipe the moisture left over.

Note(s) ❏

• Make sure all ink or corrective fluid on a document is dry before
placing the document on the scanner glass.

1 Make sure that the unit is turned Off and unplugged from the AC

outlet.

SHOCK HAZARD

• To avoid the risk of electric shock, disconnect the AC Power
cord from the AC outlet and disconnect all cables to the unit
before proceeding.

2 Remove paper from the paper support and paper exit tray.
3 Dampen a clean, lint-free soft cloth with water.

CAUTION C

Warning-Potential Damage:

• DO NOT use household cleaners or detergents, as they may
damage the finish on the unit.

4 Wipe only the outside of the unit, making sure to remove any ink

residue that has accumulated on the paper exit tray.

CAUTION C

Warning-Potential Damage:

• Using a damp cloth to clean the interior may cause damage to
your unit.

5 Make sure the paper support and paper exit tray are dry before

beginning a new print job.

Periodic maintenance is required

The unit will automatically clean the nozzle itself regularly to keep an
appropriate print quality. This maintenance begins automatically even
when the unit is in Sleep mode.

Important Notice Regarding Printheads

This unit automatically protects the printhead (caps) on each ink
cartridge in order to prevent the printheads from drying. This function
is only performed in Power-Off mode when pressing
Standby) button. DO NOT Unplug the AC Power cord from the AC
outlet to shut down the unit or move the ink cartridge access holder
after the unit was shut down. Failure to do so may result in Clogging
of the Printhead Nozzles.

(Power/

English

54

Troubleshooting

You can correct most problems by yourself. If you need additional help, the KODAK Solutions Center offers the most up-to-date driver, manuals,
the latest FAQs and troubleshooting tips. Visit our website at www.kodakverite.com/support

Setup troubleshooting

Incorrect language appears on the display Change the language selection during initial setup

– During initial setup, and every time you reset the unit to factory default settings, you will be

asked to select a language.

– Factory default

Refer to “Restore Factory Default” on page 46.

»

Select a different language after initial setup

In case the wrong language was set during initial setup, you can still change the language
settings of the unit.

Refer to “Language” on page 43.

»

Power/Standby button is not lit

Software did not install

• Press

Make sure the unit is on by pressing

• Disconnect and reconnect the AC plug

1 Disconnect the AC plug from the AC outlet for 30 sec.
2 Connect the AC plug to an AC outlet that other electrical

3 If the (Power) LED is not lit, press (Power/Standby).

If you encountered problems while installing, or if the unit does not appear in the list in the printers folder
or as the unit option when sending a print job, you can try uninstalling and reinstalling the Software.

Make sure your operating system is supported

The following operating systems are supported:

Windows® 10

Windows® 8.1

(Power/Standby)

(Power/Standby).

devices have been using or check this outlet with another device.

Microsoft® Windows®

OS Version Processor Browser USB port

Windows® Server 2012

Windows® Server 2008
Windows® 8 Windows® Vista
Windows® 7

32-bit (x86) or

64-bit (x64)

Microsoft

Edge (Only

Windows 10

Internet

Explorer®

),

USB 2.0

High Speed or Full Speed

Apple Mac OS

OS Version Processor Browser USB port

OS X v10.11

(El Capitan)

OS X v10.10

(Yosemite)

OS Version Processor Browser USB port

Debian 8.0

Check that your computer meets the minimum system requirements listed on the printer box.

• Check the USB connection

OS X v10.9

(Mavericks)

OS X v10.8

(Mountain Lion)

Linux

Ubuntu 14.04 LTS

Intel® Core™

Processor

700MHz (about

Intel® Celeron™

or better)

Safari

Firefox

USB 2.0

High Speed or Full Speed

USB 2.0

High Speed or Full Speed

1 Check the USB cable for any obvious damage. If the cable is damaged, use a new one.
2 Firmly plug the square end of the USB cable into the back of the unit.
3 Firmly plug the rectangular end of the USB cable into the USB port of your PC.

The USB port is marked with the USB symbol.

• Reconnect the power supply

1 Press (Power/Standby) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet.
3 Connect the AC plug to the AC outlet.

4 Press (Power/Standby) to turn the unit On.

English

55

Continued on next page.

Software did not install (continued)

Page does not print

• Temporarily disable security programs in Windows®

1 Close all open programs.
2 Disable any security programs.
3 Double-click the downloaded installer file to extract it.
4 Follow the instructions on the computer screen to install the Software.
5 When the installation is completed, enable the security Software again.

• Check messages

If an error message appears, then resolve the error before trying to print again.

• Check power

If the
connected to the unit and the AC plug is connected to a known working AC outlet that other
electrical devices have been using or check this outlet with another device.

• Remove and then reload paper

• Check ink

Check the ink levels, and then install new ink cartridges if necessary.

• Check cartridges

(Power) LED is not On, then make sure that the AC Power cord is properly

1 Remove the ink cartridges.
2 Make sure the sticker and tape have been removed.
3 Reinsert the cartridges.

• Check printer default and pause settings

Using Windows® 10 / 8.1 / 8 / 7 / Vista

1 Right-click the Windows® start menu, click [Control Panel], [Hardware and Sound] and

[Devices and Printers] (Windows® 10 / 8.1).
Right-click at the bottom left corner on your desktop, click [Control Panel], [Hardware

and Sound] and [Devices and Printers] (Windows® 8),
From the Windows® start menu, click [Devices and Printers] (Windows® 7)
From the Windows® start menu, click [Control Panel], [Hardware and Sound] and

[Printers] (Windows® Vista).

2 Either double-click the icon for your unit or right-click the icon for your unit and select

See what’s printing to open the print queue.

3 On the menu, make sure there are no check marks next to Pause Printing or Use Printer Offline.
4 If you made any changes, try to print again.

If a check mark does not appear next to Set As Default Printer, then you must select the unit
for each file that you want to print.

• Disconnect and reconnect power supply

Print unexpectedly or it prints garbage data.

English

1 Press (Power/Standby) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet for 30 sec.
3 Connect the AC plug to the AC outlet.
4 Press (Power/Standby) to turn the unit On.

• Remove and reinstall the Software

If you encountered problems while installing, or if the unit does not appear in the printers folder or
as a printer option when sending a print job, then try uninstalling and reinstalling the Software.

• Make sure that the USB cable is not too long.

• Make sure that the USB cable is not damaged or broken.

• If you are using a USB interface-switching device, remove it. Connect your computer directly

to your unit, and then try again.

• Make sure that you have chosen the correct printer driver to [Set as Default Printer].

• Make sure that this unit is not connected to the same port that is also connected to a storage

device or scanner device. Remove all other devices and connect only this unit (printer) to this port.

56

Continued on next page.

Solving the power problems

Removing and reinstalling the Software

Enabling the USB port in Windows®

• The unit and your PC cannot exchange data.

• Make sure the power supply is attached correctly to the unit

1 Press (Power/Standby) to turn the unit Off (Standby).
2 Disconnect the AC plug from the AC outlet.
3 Wait 30 seconds and then reconnect the AC plug to the AC outlet.
4 Press (Power/Standby) to turn the unit On.

• Make sure the unit is not in Sleep mode

If the power light is blinking On and Off slowly, then the unit is in Sleep mode.

1 Disconnect the AC plug from the AC outlet.
2 Wait 30 seconds and then reconnect the AC plug to the AC outlet.

3 Press (Power/Standby) to turn the unit On.

If the unit is not working properly, or if a communication error message appears when you try to
use the unit, then you may need to remove and reinstall the Software.

Using Windows® 10 / 8.1 / 8 / 7 / Vista

1 Open All Programs or All apps.

Click [Start] button, Click [All Apps], and then select the printer Software folder
“KODAK VERITE” from the list (Windows® 10 / 8.1).

Display [Start] screen, right-click for [All Apps] icon to fade into the bottom right, click [All
Apps], select the printer Software folder “KODAK VERITE” from the list (Windows® 8).

Click [Start] button, Click [All Programs], and then select the printer Software folder
“KODAK VERITE” from the list (Windows® 7 / Vista).

2 Select Uninstall.
3 Follow the instructions on your PC screen to remove the printer Software.
4 Restart the PC before reinstalling the printer Software.
5 Click Cancel on all New Hardware Found screens.
6 From your computer go to www.kodakverite.com/support and confirm that the

“DOWNLOADS” tab is selected.

7 Select the model [Verité 55 PLUS] from the pull-down menu of [Select Model Number].
8 Click "Drivers and Software" tab.
9 Click OS you use.
10 Click [PC Drivers & Software].
11 Click the version number on the far-right.

Refer to “Before you download the printer driver to your PC” on page 17.

»

• To confirm that the USB port is enabled on your PC:

s® 10 / 8.1 / 8 / 7 / Vista

Using W

indow

1 Right-click [Start] (Windows® 10 / 8.1).

Right-click at the bottom left corner on your desktop (Windows® 8),
Click [Start] button (Windows® 7 / Vista).

2 Click Control panel > Hardware and Sound.
3 Under Devices and Printers, click Device Manager.
4 Double-click Universal Serial Bus Controller.

If USB Host Controller and USB Root Hub are listed, then the USB port is enabled. For more
information, see your PC documentation.

English

57

Continued on next page.

•

Status Messenger Error Message appears

•

•

•

•

•

Refer to “Check print status from your PC” on page 24 and “Status

»

messages, LCD messages and LED behaviors” on page 59.

Paper handling

Refer to “Print media” on page 25 and “Status messages, LCD

»

messages and LED behaviors” on page 59 (status message: Paper
Jam).

Pages are printed, but there are problems with:

– Print quality

Refer to “Improving the print quality” on page 64.

»

Network problems

If you need additional help, the Funai Solutions Center offers the most­up-to-date driver, manuals, the latest FAQs and troubleshooting tips.
Visit our website at www.kodakverite.com/support

Alignment problems

If the following message is displayed on the LCD after running
alignment, make sure whether the alignment pattern is a printing
failure or not.

Cartridge Setup

Test scan failed.

Place test print on

upper left corner of

scanner, and close lid.

BackOKScan

Refer to “Cartridge Setup” on page 38.

»

Check the ink cartridges.

1

Open the Ink Door, then remove and reinstall the Ink Cartridges.

2 Load a plain and unmarked Letter or A4-size paper. The unit

will read any markings on used paper, which could cause the
alignment error message to reappear.

3 Close the Ink Door.
4 Press to clear the message.

English

58

Continued on next page.

Status messages, LCD messages and LED behaviors

•

The Status information will report problems with the unit. Take the proper action by referring to the following table.

Refer to “Check print status from your PC” on page 24.

»

Wireless LED — indicated by

ECO LED — indicated by

Power LED — indicated by

LED lighting patterns

Blinking 5 Blinking slowly

Blinking 6 Blinking rapidly
Blinking 1
Blinking 2
Blinking 3

Lights up for 1 sec.
Lights up very rapidly

No light for 1 sec.

No light for more than 1 sec.

Blinking very rapidly 2 times

No light for 1 sec.

Blinking 7 Blinking very rapidly

Blinking 8

Blinking very rapidly 4 times

No light for 2 sec.

Blinking 9 Blinking slowly (in Power-on mode)
Blinking 4 Blinking very slowly

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

Communication failed on the unit.

– Check the AC plug is connected to the AC outlet

properly, the unit is turned On or the connection
environment (USB, Wireless) to the unit. Then
follow the procedures by showing the help text
on your connected unit.

• If this error occurs occasionally, refer to the

Communication failure

Ready

(No Error message)

latest troubleshooting by visiting our website
at

www.kodakverite.com/support

• If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.

Insert Paper.

– Check the paper support.

• Set specified paper in the paper support, and
then press

.

“Insert paper into the paper
support”
on page 25.

Insert Paper

Insert Paper

Please insert paper

and press

OK

BackOKStart

.

blinks as pattern 1

Paper Jam

Check cartridge lock

English

Paper Jam

Clear jam and

OK

press

.

Cartridge Error

Please check
ink cartridge lock.
And retry by

OK

A paper jam has occurred inside of the unit.

– Firmly grasp the paper, and then gently pull it

blinks as pattern 1

OK

out.
Press

, to restart the rest of the print job.

• If you want to cancel the print job, then press
.

An ink cartridge is not installed correctly.

– If the packaging paper is stuck in the Ink door,

.

OK

blinks as pattern 1

remove it.

– Reinstall the cartridge, then close the lid completely.

• Confirm the ink cartridge is correctly installed,

then press .

59

“Clearing paper jam in
the unit”
on page 52.

"Unpack" on page 11.
"Install ink cartridges" on

page 12.
"Changing the ink cartridge"

on page 51.

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

A paper jam has occurred inside of the unit.

– Firmly grasp the paper, and then gently pull

Paper Jam:
Unplug and replug the

power cable.

Paper Jam

Paper Jam or

feed Roller Stall.

Clear Jam

and Unplug and replug

the power cable.

and

blink as pattern 1

it out. Pull out the AC plug. Wait at least 30
seconds, then connect the AC plug back into the
AC socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

•

If you cannot solve the problem, disconnect

“Clearing paper jam in
the unit”
on page 52.

“Power cycling”
on page 53.

the AC plug and contact an Authorized
Service Center.

Pull out the AC plug.

– Check that the Ink Cartridges have no obstacles

Cartridge/Paper Jam:
Unplug and replug the

power cable.

Cartridge/Paper Jam

Please clear

the paper jam.

Unplug and replug

the power cable.

and

blink as pattern 1

and clear pathways.
Connect the AC plug to the AC outlet.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

•

If you cannot solve the problem, disconnect
the AC plug and contact an Authorized

“Clearing paper jam in
the unit”
on page 52.

“Power cycling”
on page 53.

Service Center.

Ink Door Open

–

Close Ink Door.

Printer's ink door is
open.

Ink Door Open

Please close

ink door.

blinks as pattern 1

Remove and Re-insert
black ink cartridge.

Remove and Re-insert
color ink cartridge.

Remove and Re-insert
both black and color ink
cartridges.

Black ink is empty.

Color ink is empty.

Cartridge Error

Remove and Re-insert

black ink

Cartridge Error

Remove and Re-insert

color ink

Cartridge Error

Remove and Re-insert

both black and

color ink

Black Ink Empty

Black Color

Empty

Empty

Color Ink Empty

Black

Empty

Color

Empty

blinks as pattern 1

blinks as pattern 1

blinks as pattern 1

blinks as pattern 1

blinks as pattern 1

Soiled or unsupported ink cartridge has been
inserted.

– Clean the surface of the nozzles and contacts on

the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridge(s) with an

authorized Ink cartridge(s).

•

If this error occurs occasionally, try to replace
the current Ink cartridge(s) with a new Ink
cartridge(s).

The ink is empty in the ink cartridge.

– Replace with a new Ink cartridge(s).

• Order a new Ink cartridge from our website at

www.kodakverite.com

“Cleaning the ink cartridge
nozzles and contacts”
on page 53.

“Changing the ink cartridge”
on page 51.

“Changing the ink cartridge”
on page 51.

Both inks are empty.

English

Both Inks Empty

Black

Color

EmptyEmpty

blinks as pattern 1

60

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

No ink detected.

No Ink detected

No Ink detected

Please insert

ink cartridges.

blinks as pattern 1

– Remove and reinstall the Ink cartridges.
– Make sure the Ink cartridges are inserted

correctly.
Clean the surface of the nozzles and contacts on

–

the Ink cartridges with a dampened soft cloth

“Changing the ink cartridge”
on page 51.

“Cleaning the ink cartridge
nozzles and contacts”
on page 53.

then let them dry before reinserting cartridge.

Black ink cartridge error.

– Clean the surface of the nozzles and contacts on

“Cleaning the ink cartridge
nozzles and contacts”
on page 53.

“Changing the ink cartridge”
on page 51.

Black Ink Error

Black Ink Error

Please replace

the black ink.

blinks as pattern 1

the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridge with an

authorized Ink cartridge.

If this error occurs occasionally, try to replace

•

the current Ink cartridge with a new Ink
cartridge.

Color ink cartridge error.

– Clean the surface of the nozzles and contacts on

“Cleaning the ink cartridge
nozzles and contacts”
on page 53.

“Changing the ink cartridge”
on page 51.

Color Ink Error

Color Ink Error

Please replace

the color ink.

blinks as pattern 1

the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridge with an

authorized Ink cartridge.

If this error occurs occasionally, try to replace

•

the current Ink cartridge with a new Ink
cartridge.

Ink cartridges error.

– Clean the surface of the nozzles and contacts on

“Cleaning the ink cartridge
nozzles and contacts”
on page 53.

“Changing the ink cartridge”
on page 51.

Both Inks Error

Both Inks Error

Please replace

both ink cartridges.

blinks as pattern 1

the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridges with

authorized Ink cartridges.

If this error occurs occasionally, try to replace

•

the current Ink cartridges with new Ink
cartridges.

Ink cartridges error.

– Clean the surface of the nozzles and contacts on

“Cleaning the ink cartridge
nozzles and contacts”
on page 53.

“Changing the ink cartridge”
on page 51.

Defective Cartridge

Ink Error

Defective cartridge.

Check the ink.

blinks as pattern 1

the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridges with

authorized Ink cartridges.

If this error occurs occasionally, try to replace

•

the current Ink cartridges with new Ink
cartridges.

Black ink is empty in the ink cartridge.

– You get good printed results with Color mode

when you make prints in this condition, and the
warning indication continues until you press

Black ink is empty.

Black Ink Empty

Printing in

color-only mode.

.

OK

• If you want to use both Ink cartridges, please

replace with a new Black Ink cartridge.

Color ink is empty in the ink cartridge.

– You get good printed results with Mono mode

when you make prints in this condition and the
warning indication continues until you press

Color ink is empty.

Color Ink Empty

Printing in

mono-only mode.

.

OK

• If you want to use both Ink cartridges, please

replace with a new Color Ink cartridge.

Black ink is not inserted.

– You get good printed results with Color mode

when you make prints in this condition, and the
warning indication continues until you press

.

• If you want to use both Ink cartridges, please

Black ink cartridge is
not detected.

Black Ink Missing

Printing in

color-only mode.

OK

replace with a new Black Ink cartridge.

English

61

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

Color ink is not inserted.

– You get good printed results with Mono mode

when you make prints in this condition, and the
warning indication continues until you press

.

• If you want to use both Ink cartridges, please

Color ink cartridge is
not detected.

Color Ink Missing

Printing in

mono-only mode.

OK

replace with a new Color Ink cartridge.

Black ink is empty in the ink cartridge.

– You get good printed results with Color mode in

this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press

and

replace with a new Black Ink cartridge.

Color ink is empty in the ink cartridge.

– You get good printed results with Mono mode

in this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press

and

replace with a new Color Ink cartridge.

Black ink is not inserted.

– You get good printed results with Color mode in

this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press

and

replace with a new Black Ink cartridge.

Color ink is not inserted.

– You get good printed results with Mono mode

in this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press

and

replace with a new Color Ink cartridge.

Black ink level is low.

– You should prepare the new Ink cartridge.

• Order a new Ink cartridge from our website at

www.kodakverite.com

“Changing the ink cartridge”
on page 51.

“Changing the ink cartridge”
on page 51.

Black ink is empty.

Color ink is empty.

Black ink cartridge is
not detected.

Color ink cartridge is
not detected.

Black ink level is Low.

Print

Printing...

■■■■■■□□

Black Ink Empty

Cancel

Print

Printing...

■■■■■■□□

Color Ink Empty

Cancel

Print

Printing...

■■■■■■□□

Black Ink Missing

Cancel

Print

Printing...

■■■■■■□□

Color Ink Missing

Cancel

Print

Printing...

■■■■■■□□

Black Ink Low

Cancel

Color Ink level is Low.

Both ink levels are low.

Printer Memory Full

Printer Memory Full
(Recoverable)

Print

Printing...

■■■■■■□□

Color Ink Low

Cancel

Print

Printing...

■■■■■■□□

Inks Low

Cancel

Memory Full

Print failure.

Adjust the print

settings to reduce the

quality of the print job.

Skip

Memory Full

Print failure.

You can print

only one copy.

SkipOK Continue

blinks as pattern 1

blinks as pattern 1

Color ink level is low.

– You should prepare the new Ink cartridge.

• Order a new Ink cartridge from our website at

www.kodakverite.com

Both inks are low in the ink cartridges.

– You should prepare the new Ink cartridges.

• Order new Ink cartridges from our website at

www.kodakverite.com

Memory of the unit is full.

– You cannot print with this print setting.
– Please change the print setting, and try again.

(Resolution, size or number of copies)

Memory of the unit is full.

– You cannot print the multiple copies with this

print setting.

– Please change the print setting, and try again.

(Resolution, Size or Number of copies)

“ Confirming

Printing

Preferences for Windows®

-Page Layouts” on page
28
or “Confirming Print
Settings for Mac -Layout”
on page 30.

“ Confirming

Printing

Preferences for Windows®

-Print Quality” on page
27
or “Confirming Print
Settings for Mac -Quality &
Media”
on page 30.

English

62

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

Pull out the AC plug.

– Wait at least 30 seconds, then connect the AC

Scanner Error:
Unplug and replug the

power cable.

Scanner Error

Please check

Scanner Unit

and Unplug and replug

the power cable.

and

blink as pattern 1

plug back into the socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

If you cannot solve the problem, disconnect

•

the AC plug and contact an Authorized

“Power cycling”
on page 53.

Service Center.

Pull out the AC plug.

– Wait at least 30 seconds, then connect the AC

Memory Error:
Unplug and replug the

power cable.

Memory Error

Unplug and replug

the power cable.

and

blink as pattern 1

plug back into the socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

If you cannot solve the problem, disconnect

•

the AC plug and contact an Authorized

“Power cycling”
on page 53.

Service Center.

Please confirm the Menu display of the device.

Alignment in progress

<Alignment in progress...>

blinks as pattern 6

– Print jobs cannot start while running alignment.

Run the alignment or run cancel operation on the
device.

Pull out the AC plug.

– Wait at least 30 seconds, then connect the AC

plug back into the socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

•

If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.

“Power cycling”
on page 53.

Wi-Fi Module Error:
Unplug and replug the

power cable.

NFC Module Error:
Unplug and replug the

power cable.

Wi-Fi Module Error

Unplug and replug

the power cable.

NFC Module Error

Unplug and replug

the power cable.

and

blink as pattern 1

and

blink as pattern 1

English

63

Continued on next page.

Improving the print quality

If printout is like below, please try the suggestions in order.

Examples of poor image quality Suggestions

Faint

1 Using genuine ink cartridges

Refer to “Ordering ink cartridges” on page 52.

»

2 Checking ink levels

Refer to “Checking ink levels” on page 51.

»

3 Cleaning the ink cartridge nozzles

Refer to “Clean Printhead” on page 38.

»

4 Aligning ink cartridges

Refer to “Cartridge Setup” on page 38.

»

5 Cleaning the ink cartridge nozzles and contacts

Refer to “Cleaning the ink cartridge nozzles and contacts” on page 53.

»

6 Cleaning the scanner glass (Copy function)

Refer to “Cleaning the scanner glass” on page 54.

»

7 Cleaning the exterior of the unit

Refer to “Cleaning the exterior of the unit” on page 54.

»

8 Please change to the higher quality mode. (Faint or white lines)

Refer to “Confirming Printing Preferences for Windows® -Print Quality”

»

on page 27 or “Confirming Print Settings for Mac -Quality & Media”
on page 30.

Faded colors / Incorrect color

White lines across on the page

No printing results on the page

English

64

Appendix

•

Specifications

For more product specifications, see the Product Data Sheet at

www.kodakverite.com/support

Technical Data

Dimensions (width x depth x height)
Maximum dimensions (width x depth x height)
Weight 8.0 lb. (3.65 kg)

Power requirements 100 - 127 V AC (-10%/+5%), 50/60 Hz (+/- 3 Hz)
Operating temperature 41 °F (5 °C) to 95 °F (35 °C)
Operating humidity 10 – 60 % (no condensation)

Print technology Thermal inkjet
Standard printer language(s) GDI
Print resolution (best) Up to 4800 x 1200(black)

Copy resolution
(Black & Color/Text and Photo)

Scanner type Flatbed scanner
Scan resolution (optical)

(Software enhanced)
Maximum scan area 8.5 x 11.7 inches (216 x 297 mm)

Supported file types JPEG, PDF

Input capacity Plain paper (20 lb. or 75 g/m
Output capacity Plain paper (20 lb. or 75 g/m
Size Letter, Legal, JIS B5, A4, Executive, A5, Statement, A6, 3x5 in., 4x6 in., 5x7 in.,

Weight Plain paper: 17 -24 lb. (64 - 90 g/m

Connection type USB 2.0 (High Speed)

Supported operating systems
Direct print support capability Wireless Direct Printing

Acoustic values based on ISO9296 Visit our website at www.kodakverite.com/support

17.7 x 10.7 x 6.0 inches (450.4 x 272.5 x 153 mm)

17.7 x 18.5 x 10.3 inches (450.4 x 470.6 x 262 mm)

Printer

Up to 4800 x 1200(color)

Copier

Scan up to 600 x 600 dpi
Print up to 4800 x 1200 dpi(black)
Print up to 4800 x 1200 dpi(color)

Scanner

Up to 1200 x 1200 dpi
Up to 19,200 x 19,200 dpi

Paper

Hagaki, 3.5x5 in.(L), 10 Envelope, DL Envelope, C5 Envelope

PC-Network Connection

Wi-Fi IEEE 802.11 b/g/n
Visit our website at www.kodakverite.com/support

Standards

2

): Up to 60

2

): Up to 25

2

)

• Technical specifications subject to change without notice.

Note about recycling

• This unit’s packaging materials are recyclable and can
be reused. Please dispose of any materials
in accordance with your local recycling regulations.

• For product recycling information, please visit -

www.kodakverite.com/support click on

Safety Data Sheet (SDS)

To obtain Safety Data Sheets (SDS) for supplies containing chemical
substances (e.g. ink), visit our website at

www.kodakverite.com/support

JF210UA/JF211UA/JF212UA

English

★★★★

Notes on statutory limitations, data protection and legal
validity

The reproduction of certain documents (e.g. by scanning, printing,
copying) is prohibited in many countries. The list of such documents
below is not intended to be complete, it only offers a general
overview. In case of doubt, consult your legal adviser.

– Passports (personal identification)
– Entrance and exit visa papers (immigration papers)
– Military service documents
– Paper Currency, Bank notes, travel checks, payment orders
– Postage stamps, tax stamps (stamped or unstamped)
– Loan papers, certificates of deposit, bonds
– Documents protected by copyright

Neither Funai nor its affiliates shall be liable to the purchaser of this product or third par­ties for damages, losses, costs, or expenses incurred by the purchaser or third parties as
a result of accident, misuse, or abuse of this product or unauthorized modifications, re­pairs, or alterations to this product, or failure to strictly comply with Funai operating and
maintenance instructions. Funai shall not be liable for any damages or problems arising
from the use of any options or any consumable materials other than those designated
as original products or approved products. Funai shall not be held liable for any damage
resulting from electromagnetic interference that occurs from the use of any interface
cables other than those designated as products.

65

Limited Warranty

Wireless All-In-One Inkjet Printer

FUNAI warrants this Product to be free from malfunctions and defects in both materials and workmanship for one year from the date of
purchase unless the product is sold as refurbished in which case it then comes with a (90) day Limited Warranty.

LIMITS AND EXCLUSIONS:

Warranty service is only available from within the country where the Product was originally purchased. You may be required to ship
Product, at your expense, to the authorized service facility for the country where the Product was purchased.

Funai will repair or replace this Product if it fails to function properly during the warranty period, subject to any conditions and/or limi­tations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Funai is
unable to repair or replace a Product, Funai will, at its option, refund the purchase price paid for the Product provided the Product has
been returned to Funai along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole
remedies under this warranty.

If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it
is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of the repair or replace­ment, whichever is longer.

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was at-

tempted by an unauthorized service center.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover dam-

age which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI, or damage, which
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES, ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI AND ITS REPRESENTATIVES OR AGENTS
SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT
OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.

IMPORTANT:

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Funai
warranty is communicated to the purchaser in writing by a Funai company, no warranty or liability exists beyond any minimum require­ments imposed by law, even though defect, damage, or loss may be by negligence or other act.

AT TE N TI ON : FUNAI RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or
packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI will not reimburse you for any
service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

FUNAI SERVICE CORPORATION

www.kodakverite.com/support

© 2016 Funai Electric Co., Ltd. All rights reserved.
The Kodak trademark and trade dress are used under license from Eastman Kodak Company.

English

2425 Spiegel Drive, Groveport, OH 43125

66

The Kodak trademark and trade dress are used under license from Eastman Kodak Company.
www.kodakverite.com

© 2016 Funai Electric Co., Ltd. All rights reserved.