Kodak Truper User Manual

Replacing paper feed module

Push button to open ADF door.

Remove roller from ADF door.

Indicator Lights and Error Codes

The color of the LED indicates scanner status:

LED Status

Steady green Ready to scan or scanning is in

process. Flashing green Sleep mode. Flashing green/

orange Steady orange The rollers need to be cleaned or

Flashing orange

Red An error occurred. Check the status of

Multifeed Ignore function is set.

replaced. Scanning can continue.

Initializing or Sleep mode with

warning. Check the status of the

scanner using the User Utility.

the scanner using the User Utility.

Supplies and Accessories

CAT No. Description

853 5981 Roller Cleaning Pads 896 5519 Staticide wipes 846 0321 Roller Exchange Kit 153 5376 Shading Paper 179 7158 Blower Brush 145 2812 Replacement Packaging 124 4847 Memory Upgrade Kit - Accessory 896 1955 Imprinter Kit - Accessory 155 8667 Printer Kit Cartridge 109 2436 Long Document Paper Weight Kit -

Accessory

Trūper Series Scanners

Reference Guide

Kodak Service & Support

www.kodak.com/go/disupport

Insert new roller and rotate roller assembly up.

EASTMAN KODAK COMPANY 343 State Street Rochester, New York 14650 U.S.A. A-61691 / Part #7J3601 July, 2010

1.800.822.1414

(US&C only; all other regions, contact your local

Kodak Support Center)

When contacting support, have the following available:

• A description of your problem

• Scanner model and serial number

• Computer configuration

• Software application you are using

Cleaning rollers in the ADF/Exit area

Press button to open ADF door; push lever up to open exit door.

Cleaning imaging guides

Clean the imaging guides with a Staticide wipe.

Cleaning the sensors

Use blower brush

Paper sensor, waiting sensor and double feed detector

Clean all rollers in ADF area.

Clean all rollers in exit area.

Ending sensor, skew sensors and starting sensor.

For detailed cleaning and replacement procedures see Chapter 5, Maintenance in the User’s Guide.