KODAK LUMA 450 User Manual

KODAK LUMA 450

PORTABLE FULL HD SMART PROJECTOR

User Manual

4.9"H | 4.9"W | 1.26"D (12.5 cm | 12.5 cm | 3.2 cm)

Please read all directions before using the product and retain this guide for reference.

CONTENTS

INTRODUCTION

1

SPECIFICATIONS

2

BOX CONTENTS

3

SAFETY PRECAUTIONS

4

PRODUCT OVERVIEW

5

REMOTE CONTROL OVERVIEW

6

USING YOUR PHONE

7

USING A MOUSE

8

CHARGING THE PROJECTOR

9

USING THE PROJECTOR TO CHARGE DEVICES

10

USING THE AUDIO OUT JACK

11

3

3

3

34

4

5

6

7

7

8

8

POWERING THE PROJECTOR ON/OFF

12

PHOTO PLAYBACK CONTROLS

13

VIDEO PLAYBACK CONTROLS

14

ADJUSTING FOCUS

15

ADJUSTING VOLUME

16

CONNECTING TO WIRELESS NETWORKS

17

ADJUSTING BRIGHTNESS

18

SET THE SCREEN ORIENTATION

19

SETTING DATE AND TIME

20

RESETTING THE PROJECTOR

21

CONNECTING EXTERNAL DEVICES

22

SCREEN MIRRORING ANDROIDWINDOWS  MIRACAST®

23

8

9

9

9

10

1011

11

1112

12

1213

13

14

SCREEN MIRRORING IOS

24

PRELOADED APPS

25

USING THE APP STORE

26

UPDATING YOUR SOFTWARE

27

CUSTOMER SERVICE

28

WARRANTY

29

1415

15

15

16

16

1618

1. INTRODUCTION

Thank you for purchasing the KODAK LUMA 450 PORTABLE FULL HD SMART PROJECTOR. This User
Guide is intended to provide you with guidelines to ensure that operation of this product is safe and
does not pose risk to the user. Any use that does not conform to the guidelines described in this User
Guide may void the limited warranty.

Please read all directions before using the product and retain this guide for reference. This product is
intended for household use only.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.
See warranty for details.

2. SPECIFICATIONS

Rated Input: 15 V, 2 A
Rated Output: 5 V, 1.0 A
ANSI Lumens: 200
Native Resolution: 1920 x 1080

3. BOX CONTENTS

KODAK LUMA 450
Remote Control
Tabletop Tripod
HDMI®-to-HDMI® Cable
Charging Cable
User Guide

4. SAFETY PRECAUTIONS

• Do not attempt to disassemble this device for any reason.

• Do not store the projector in areas where it will be exposed to high temperatures, humidity, or direct
sunlight. Exposure to any or all of these could permanently damage the projector.

• Never handle the projector with damp or wet hands. This could damage the projector or create the
risk of electric shock.

• Keep the projector out of the reach of children.

• Never point the projector at someone else’s face or look directly into the projector light. The light is
bright and could cause damage.

• Do not use products such as alcohol, gasoline, diluent, or any other organic solvent when cleaning or
attempting to clean this product.

• Do not use this device in an environment where it will be exposed to heavy dust or humidity/moisture.

• Never drop or shake the projector, as this could cause it to malfunction or permanently damage the
inside parts.

• Do not use the projector while bathing or in a shower.

• Do not place or store the projector where it can fall or be pulled into a tub or sink.

3

• Do not place, drop, or submerge the projector in water or any other liquid.

• If the projector somehow falls into water despite you taking all of the above precautions, please do not
reach into the water to retrieve it. Unplug it immediately and then retrieve it.

• Take care that objects do not fall and liquids are not spilled onto the projector.

5. PRODUCT OVERVIEW

1. Lens

2. Air Outlet

3. Up

4. Conirm / Back (press more than two (2) seconds)

5. Right

6. Left

7. Down

8. Power Indicator

9. Audio Output (3.5 mm)

10. USB Input / Power Out

11. HDMI Input

12. DC Input (15 V/2 A)

13. Reset

4

1. Power

2. Speaker

3. Air Inlet

4. Tripod Dock

5. Rating Label

6. Non-Slip Mat

7. Focus Wheel

8. Speaker

6. REMOTE CONTROL OVERVIEW

You will need to pair the remote control with the projector before using it. Follow these instructions to
pair the 2.4G wireless remote with your projector.

1. Within two (2) minutes of turning on the projector, press and hold both the Vol + and Vol – keys for

approximately three seconds.

2. The indicator light in the remote will lash quickly during this time and then stop. When the

lashing stops, this indicates that the remote has successfully paired with the projector.

NOTE: While the mouse button is activated, the Volume + or Volume - keys will function as page up
and down.

5

7. USING YOUR PHONE

For greater ease of use and a more intuitive experience, you can control the projector with the KODAK
LUMA Companion App from the Apple App Store or the Google Play store.

Once installed, you can use your phone as a remote to navigate through menus, mirror your screen,
easily input login information for apps, and control media volume. Make sure to try out the reverse
screen mirroring feature, which allows you to view the LUMA interface directly on your phone, and
navigate that way!

1. Search for the KODAK LUMA in your phone’s app store.

2. Download the app, and make sure that your phone is connected to the same Wi-Fi network as

the projector.

3. Open the app and follow the instructions to pair it with the projector to enable remote

functionality.

Scan this QR code to download the KODAK LUMA App and use your phone as a remote!

Apple Store Google Play

Scan this QR code to ind out more about the KODAK LUMA App and all its great features.

6